17.080 时间、速度、加速度、角速度的测量 标准查询与下载

BS 5698-2:1989 脉冲技术和设备指南.第2部分:脉冲测量和分析:总则

Definitions and descriptions of the techniques and procedures for time domain pulse measurements which are independent of specific devices, apparatus, instruments or computing devices.

Guide to pulse techniques and apparatus - Pulse measurement and analysis, general considerations

AIR FORCE MS27573 REV A VALID NOTICE 1-1989 航空器凸缘架集油槽2 3/4英寸刻度盘仪器药筒

MS27573, dated 19 November 1968, has been reviewed and deterinined to be valid for use in acquisition.

CASE, INSTRUMENT, 2 3/4 INCH DIAL, WITH SUMP, FLANGE MOUNTED, AIRCRAFT

GEIA EDIF 2-1989 EDIF连通丛书.第2卷

There .are several aspects of an electronic design that must be captured and expressed by a design interchange format. One of these aspects is the connectivity of the circuit. The circuit connectivity or topology may be defined in several ways: as part

EDIF Connectivity Monograph Series Volume 2

CNS 2734-1989 汽车煞车试验法

本标准规定汽车之煞车试验方法。备考：本标准中｛｝内之单位及数值，系依国际单位制（SI）。

Method of Brake Test for Automobiles

GEIA CMB6-8-1989 室内和数据管理培训计划

Data Management In-House Training Course

Data Management In-House Training Course

GEIA EIA-555-1989 验证符合规定质量水平PPM量级符合程度的批量验收程序

In the ideal case, a supplier would deliver only specification compliant components to his customer. Unfortunately, this is not always possible.

Lot Acceptance Procedure for Verifying Compliance with the Specified Quality Levels (SQL) in PPM Annex to SSB-1, Guidelines for Using Plastic Encapsulated Microcircuits and Semiconductors in Military, Aerospace and Other Rugged Applications [Replaced: GE

GEIA EDIF_AG-1-1989 用EDIF200为为示意图转移申请指南

The recommendations contained in this document are intended to movide a 1- temporary conventions for certain EDIF applications. These recommendations are only applicable to EDIF Version 2 0 O.

Applications Guide Using EDIF 2 0 0 for Schematic Transfer

GEIA DMG-2-1989 自动化数据管理指南

This document provides guidance in the developing, managing, controlling and transmitting of data in the current electronic environment.

Automated Data Management Guideline

ANSI S2.61-1989 加速器机械安装指南

Describes the mounting characteristics of accelerometers to be specified by the manufacturer and makes recommendations to the user for mounting accelerometers. The application of this standard is limited to the mounting of electromechanical transducers o

Guide to the Mechanical Mounting of Accelerometers

GEIA EDIF 1-1988 EDIF专刊系列.第1卷:引言

An EDIF description is expressed in the form of a hierarchy, abstract at its higher levels, and becoming progressively more detailed as it descends the hierarchy, At the highest level of this structure the EDIF description contains, in a single logical

Introduction to EDIF Monograph Series Volume 1

NF C42-691:1988 脉冲技术和仪器.脉冲测量和分析的一般考虑

E techniques and apparatus. Pulse measurement and analysis, general considerations.

GEIA CMB6-2-1988 室内配置和数据管理培训计划

This standard applies to the interconnection of data terminal equipment and numerical control equipment at the tape reader interface. The data terminal would typically be connected to a remote data source/sink such as a computer.

Configuration and Data Management In-House Training Plan

GEIA CMB6-5-1988 配置情况帐户手册

Basically, status accounting refers to the record-keeping functions inherent i n the other elements of Configuration Management (CM) and to the special ized management information systems that must exist to provide all of the information.

Textbook for Configuration Status Accounting

IEEE 1139-1988 基本频率和时间计量学用物理量定义

Definitions of physical quantities for fundamental frequency and time metrology

IEC 60469-2:1987 脉冲技术和装置 第2部分:脉冲测量和分析 一般考虑

Provides definitions and descriptions of the techniques and procedures for time domain pulse measurements. The definitions and descriptions provided are independent of specific devices, apparatus, instruments or computing devices which may be used in pul

Pulse techniques and apparatus. Part 2 : Pulse measurement and analysis, general considerations

GEIA DMG-1-1986 数据管理完善指南

The Don established uniform policies and procedures for the procurement of technical data and management of data programs. This was accomplished with the release of Department of Defense Instruction (DODI) 5010.12, "Management of Technical Data" dated

Data Management Implementation Guide

GEIA CMB5-A-1986 转包商/卖方的配置管理要求

Configuration Management (CM) disciplines provide a means for the management of technical engineering documentation, determining any differences between the documentation and the product as built, and controlling changes affecting both. In applying CM

Configuration Management Requirements for Subcontractors/Vendors

GOST 8.515-1984 ГСИ.苏联国家时间频率服务机构专用无线电台发射的频率和时间标准信号时标

Настоящий стандарт распространяется на эталонные сигналы частоты и времени, излучаемые специализированными радиостанциями Государстве

State system of ensuring the uniformity of measurements. Standard frequency and time signals radiated by specialized radio stations of the State service of time, frequency and the Earth rotation parameters determination. Time code

GOST 23213-1984 机车速度计.一般技术条件

Speedometers for locomotives. General specifications

GOST 8.137-1984 国家测量一致性保证体制.冲击运动加速测量方法的国家专用标准和全联盟鉴定表

Настоящий стандарт распространяется на государственный специальный эталон и государственную поверочную схему для средств измерений уск

State system for ensuring the uniformity measurements. State special standard and all-union verification schedule for means measuring acceleration in shock motion