17.160 振动、冲击和振动测量 标准查询与下载

GSO ISO 7626-5:2024 机械振动与冲击 机械移动性的实验测定 第5部分：使用未安装在结构上的激振器进行冲击激励的测量

This document specifies procedures for measuring mechanical mobility and other frequency-response functions of structures excited by means of an impulsive force generated by an exciter which is not attached to the structure under test. It is applicable to the measurement of mobility, accelerance or dynamic compliance, either as a driving point measurement or as a transfer measurement, using impact excitation. Other excitation methods, such as step relaxation and transient random, lead to signal-processing requirements similar to those of impact data. However, such methods are outside the scope of this document because they involve the use of an exciter which is attached to the structure. The signal analysis methods covered are all based on the discrete Fourier transform (DFT), which is performed mostly by a fast Fourier transform (FFT) algorithm. This restriction in scope is based solely on the wide availability of equipment which implements these methods and on the large base of experience in using these methods. It is not intended to exclude the use of other methods currently under development. Impact excitation is also widely used to obtain uncalibrated frequency-response information. For example, a quick impact test which obtains approximate natural frequencies and mode shapes can be quite helpful in planning a random or sinusoidal test for accurate mobility measurements. These uses of impact excitation to obtain qualitative results can be a first stage for mobility measurements. This document is limited to the use of impact excitation techniques for making accurate mobility measurements.

Mechanical vibration and shock — Experimental determination of mechanical mobility — Part 5: Measurements using impact excitation with an exciter which is not attached to the structure

GSO ISO 7626-2:2024 机械振动与冲击 机械移动性的实验测定 第2部分：使用附加振动激励器的单点平移激励进行测量

ISO 7626-2:2015 specifies procedures for measuring linear mechanical mobility and other frequency-response functions of structures, such as buildings, machines and vehicles, using a single-point translational vibration exciter attached to the structure under test for the duration of the measurement. It is applicable to measurements of mobility, accelerance, or dynamic compliance, either as a driving-point measurement or as a transfer measurement. It also applies to the determination of the arithmetic reciprocals of those ratios, such as free effective mass. Although excitation is applied at a single point, there is no limit on the number of points at which simultaneous measurements of the motion response may be made. Multiple-response measurements are required, for example, for modal analyses.

Mechanical vibration and shock — Experimental determination of mechanical mobility — Part 2: Measurements using single-point translation excitation with an attached vibration exciter

GSO ISO 6070:2024 振动发生器辅助表 设备特性描述方法

This document establishes requirements to ensure appropriate exchange of information between manufacturers and users of auxiliary tables with a view to working out related specifications and possibly to comparing, in an objective way, the characteristics supplied by the manufacturers of auxiliary tables and associated guidance systems. This document is applicable to auxiliary tables which include slip tables and head expanders. It does not cover auxiliary tables with several degrees of freedom. This document provides three levels of description of the test equipment, as follows: a) minimum level; b) medium level; c) high level. This document gives a list of characteristics to be specified for each level of description.

Auxiliary tables for vibration generators — Methods of describing equipment characteristics

T/SZZD 002-2024 4G 动态血压监测技术要求

4G 动态血压监测技术要求的设备架构、数据分类及分级、技术要求、试验方法、信息、通信及服务器安全

Technical requirements for 4G dynamic blood pressure monitoring

24/30485859 DC BS ISO 16063-21:2003/AMD 2 振动和冲击传感器的校准方法 第21部分：通过与参考传感器比较进行振动校准 修改件2

BS ISO 16063-21:2003/AMD 2 Methods for the calibration of vibration and shock transducers - Part 21: Vibration calibration by comparison to a reference transducer. AMENDMENT 2

KS B ISO 13379-2-2023 机器状态监测和诊断数据解释和诊断技术第2部分:数据驱动应用

Condition monitoring and diagnostics of machines — Data interpretation and diagnostics techniques — Part 2: Data-driven applications

KS B ISO 16063-41-2023 振动和冲击传感器的校准方法第41部分:激光振动计的校准

Methods for the calibration of vibration and shock transducers — Part 41: Calibration of laser vibrometers

KS B ISO 7626-2-2023 机械振动和冲击——机械迁移率的实验测定——第2部分:使用附装激振器的单点平移激励的测量

Mechanical vibration and shock — Experimental determination of mechanical mobility — Part 2: Measurements using single-point translation excitation with an attached vibration exciter

KS B ISO 16063-21-2023 振动和冲击传感器的校准方法第21部分:与参考传感器比较的振动校准

Methods for the calibration of vibration and shock transducers — Part 21: Vibration calibration by comparison to a reference transducer

KS B ISO 8042-2023 冲击和振动测量——地震传感器的特性规定

Shock and vibration measurements — Characteristics to be specified for seismic pick-ups

KS B ISO 18437-2-2023 机械振动和冲击粘弹性材料动态力学性能的表征第2部分:共振法

Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 2: Resonance method

KS B ISO 18431-1-2023 机械振动和冲击信号处理第1部分:总则

Mechanical vibration and shock — Signal processing — Part 1: General introduction

KS B ISO 18431-2-2023 机械振动和冲击信号处理第2部分:傅立叶变换分析的时域窗口

Mechanical vibration and shock — Signal processing — Part 2: Time domain windows for Fourier Transform analysis

KS B ISO 16063-11-2023 振动和冲击传感器的校准方法第11部分:激光干涉测量法的一次振动校准

Methods for the calibration of vibration and shock transducers — Part 11: Primary vibration calibration by laser interferometry

KS B ISO 18437-3-2023 机械振动和冲击粘弹性材料动态力学性能的表征第3部分:悬臂剪切梁法

Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 3: Cantilever shear beam method

KS B ISO 16063-17-2023 振动和冲击传感器的校准方法第17部分:离心机初步校准

Methods for the calibration of vibration and shock transducers — Part 17: Primary calibration by centrifuge

KS B ISO 16063-12-2023 振动和冲击传感器的校准方法第12部分:互易法一次振动校准

Methods for the calibration of vibration and shock transducers — Part 12: Primary vibration calibration by the reciprocity method

KS B ISO 10813-1-2023 振动发生机械选择指南第1部分:环境试验设备

Vibration generating machines — Guidance for selection — Part 1: Equipment for environmental testing

KS B ISO 16063-22-2023 振动和冲击传感器的校准方法第22部分:与参考传感器比较的冲击校准

Methods for the calibration of vibration and shock transducers — Part 22: Shock calibration by comparison to a reference transducer

KS B ISO 8568-2023 机械冲击试验机特性和性能

Mechanical shock — Testing machines — Characteristics and performance