23.040 管道部件和管道 标准查询与下载

NAVY MIL-PRF-5425 E-1998 耐热丙烯酸塑料板

This specification covers optical quality, transparent, heat-resistant, cast acrylic plastic sheet. The requirements are for flat sheet material that has not been formed.

PLASTIC SHEET, ACRYLIC, HEAT RESISTANT

NAVY MIL-PRF-8184 F-1998 改性丙烯酸塑料板

This specification covers optical quality, transparent, modified acrylic plastic sheet.

PLASTIC SHEET, ACRYLIC, MODIFIED [Use In Lieu Of: NAVY MIL-P-008184 D CANC NOTICE 1]

NAVY MIL-T-81914 NOTICE 1-1998 曲细挠性塑料管的一般规范

This notice should be filed in front of MIL-T-81914, dated 28 February 1973.

TUBING, PLASTIC, FLEXIBLE, CONVOLUTED, CONDUIT, GENERAL SPECIFICATION FOR

DLA MS3339 REV B NOTICE 1-1998 使用MS3367塑料栓紧条的塑料安装盘

This notice should be filed in front of MS3339B, dated 18 June 1974.

PLATE, MOUNTING, PLASTIC FOR USE WITH MS3367 PLASTIC TIEDOWN STRAPS

GSO ISO 3474:1997 非塑料聚氯乙烯管不透明度的要求和测量

This standard specifies a method for the determination of the opacity of unplasticized polyvinyl chloride (PVC) pipes and lays down the acceptable limit of light which may pass through the wall of the pipe.

UNPLASTICIZED POLYVINYL CHLORIDE (uPVC) PIPES - SPECIFICATION AND MEASUREMENT OF OPACITY

GSO ISO 3114:1997 饮用水用非塑料聚氯乙烯管铅、锡萃取试验方法

This Gulf standard specifies a method of test for the determination of the extractability of certain stabilizers of unplasticized PVC in order to verify that the extracted quantities do not exceed a certain concentration.

UNPLASTICIZED POLYVINYL CHLORIDE (uPVC) PIPES FOR POTABLE WATER SUPPLY – EXTRACTABILITY OF LEAD AND TIN – TEST METHOD

GSO ISO 2508:1997 非塑料聚氯乙烯管吸水率指定方法和要求

This Gulf standard specifies a method for the determination of the water absorption of unplasticized polyvinyl chloride (uPVC) pipes and also specifies the maximum permissible value for this water absorption. This standard applies to all unplasticized pipes whatever their purpose.

Unplasticized polyvinyl chloride (uPVC) pipes - water absorpption - determination and specification.

GSO 676:1997 饮用水用非塑料聚氯乙烯管材试验方法

This Gulf standard is concerned with the methods of testing of unplasticized polyvinyl chloride pipes for potable water.

METHODS OF TESTING OF UNPLASTICIZED POLYVINYL CHLORIDE (UPVC) PIPES FOR POTABLE WATER

GSA A-A-1684 C-1997 压敏胶粘带(塑料膜)

This Commercial Item Description covers tape intended for labeling attachment and covering closure and sealing of interior and exterior domestic containers.

TAPE, PRESSURE-SENSITIVE ADHESIVE (PLASTIC FILM)

DLA A-A-55308-1997 弹性高强度塑料尼龙或聚酯

The General Services Administration has authorized the use of this commercial item description as a replacement for Military Specifications MIL-V-16720E and MIL-V-16721D which are cancelled.

CLOTH AND STRIP, LAMINATED OR COATED, VINYL NYLON OR POLYESTER, HIGH STRENGTH, FLEXIBLE

ARMY MIL-S-45921 A NOTICE 1-1997 (M14型7.62MM来复枪)(预混合料)塑料玻璃纤维加固.W/O盖板装配的轻便抛绳枪贮存

This notice should be filed in fiont of MIL-S-4592 1 A, dated 22 June 1993

STOCK, GUN, SHOULDER: ASSEMBLY W/O BUTT PLATE, FIBERGLASS REINFORCED, PLASTIC (PREMIX) (FOR RIFLE, 7.62MM: M14)

DLA A-A-55624-1997 UNC-2A开槽的塑料(尼龙)机用螺丝

This Commercial Item Description (CID) depicts the requirements for UNC-2A thread, plasticnylon,slotted, pan head machine screws.

SCREW, MACHINE, PAN HEAD, SLOTTED, PLASTIC (NYLON), UNC-2A

AWWA C200-1997 钢水管6英尺(150毫米)或更大

This standard covers electrically butt-welded straight-seam or spiral-seam pipe and seamless pipe, 6 in. (150 mm)* in nominal diameter and larger, for the transmission and distribution of water or for use in other water system facilities.

Steel Water Pipe - 6 in. (150 mm) and Larger

NAVY MIL-P-5431 A NOTICE 1-1997 塑胶制品-酚醛树脂及其他形状塑料-酚醛石墨钢板

This notice should be filed in front of MIL-P-543 lA(AS), dated 17 May 1967, and Amendment -1, dated 29 February 1968.

PLASTIC-PHENOLIC, GRAPHITED, SHEETS, RODS, TUBES AND SHAPES

AIR FORCE MIL-S-27332 B NOTICE 1-1997 插入坐垫的聚氨酯泡沫塑的一般规格

This notice should be filed in fiont of MIL-S-27332B, dated 26 October 1983

SEAT CUSHION INSERT, POLYURETHANE FOAM, PLASTIC, GENERAL SPECIFICATION FOR

SH/T 3406-1996 石油化工钢制管法兰

Steel pipe flanges for petrochemical industry

AIR FORCE A-A-58078-1996 塑料板(包装应用)

This commercial item description covers plastic board primarily for use in the fabrication of shipping containers. May also be used in the fabrication of pads, partitions, and cut shapes.

PLASTIC BOARD (FOR PACKAGING APPLICATIONS) [Superseded: AIR FORCE MIL-P-83668 A CANC NOTICE 1, AIR FORCE MIL-P-83668 A, AIR FORCE MIL-P-83668]

NAVY MIL-M-81288 NOTICE 2-1996 柔软的塑料泡沫安装基地

This notice should be filed in front of MIL-M-81288(AS), dated 1 January 1966, Amendment 1,dated 15 July 1968, and Notice 1, dated 28 October 1991.

MOUNTING BASES, FLEXIBLE PLASTIC FOAM

NAVY MIL-F-81334 B NOTICE 1-1996 聚氨酯开放细胞聚酯型灵活塑料泡沫

MIL-F-S1334B(AS) is inactive for new design and is no longer used, except for replacement purposes.

FOAM, PLASTIC, FLEXIBLE, OPEN CELL POLYESTER TYPE, POLYURETHANE

NAVY MIL-P-81390 NOTICE 2-1996 用于加固的玻璃光纤聚碳酸酯塑料成型物质

This notice should be filed in front of MIL-P-81390, dated 15 August 1966, and Notice 1, dated 28 October 1991.MIL-P-8 1390 is inactive for new design and is no longer used, except for replacement purposes.

PLASTIC, MOLDING MATERIAL, POLYCARBONATE, GLASS FIBER REINFORCED