23.040 管道部件和管道 标准查询与下载

DLA A-A-59504-2000 有压敏粘合剂涂层的透明乙酸纤维素塑料板(薄板材料)

The General Services Administration has authorized the use of this commercial item description as a replacement for Military Specifications MIL-V-16720E and MIL-V-16721D which are cancelled.

PLASTIC SHEET (SHEETING), PRESSURE SENSITIVE ADHESIVE COATED, CELLULOSE ACETATE, TRANSPARENT [Superseded: DLA MIL-P-46140 B CANC NOTICE 3, DLA MIL-P-46140 B VALID NOTICE 2, DLA MIL-P-46140 B, DLA MIL-P-46140 A, DLA MIL-P-46140]

NAVY MIL-P-8045 B NOTICE 1-1999 塑胶制品和非塑胶的密封罐备用塑料材料

This notice should be filed in front of MIL-P-8045B, dated 22 February 1974.

PLASTIC, SELF-SEALING AND NON-SELF-SEALING TANK BACKING MATERIAL

NAVY P-P-560 B (3)-1999 塑料研磨膏

The margins of this amendment are marked with asterisks to indicate where changes from the previous amendment were made. This was done as a onvenience only and the Government assumes no liability whatsoever for any inaccuracies in these notations. Bidders and contractors are cautioned to evaluate the requirements of this document based on the entire content irrespective of the marginal notations and relationship to the last previous amendment.

POLISH, PLASTIC

NAVY L-P-410 A (4)-1999 模塑和铸塑扁钢竿管刚性聚酰胺(尼龙)塑料

The General Services Administration has authorized the use of this amendment which forms a part of L-P-410A, dated March 16, 1966, by all federal agencies.

PLASTIC, POLYAMIDE (NYLON), RIGID: RODS, TUBES, FLATS, MOLDED AND CAST PARTS

NAVY MIL-E-82740 NOTICE 1-1999 PBXN-301型注射成形塑料粘结炸药

This list has been prepared for use by or for the Government in the procurement of products covered by subject specification and such listing of a product is not intended to and does not connote endorsement of the product by the Department of Defense. All products listed herein have been qualified under the requirements for the product as specified in the latest effective issue of the applicable specification. This list is subject to change without notice.

EXPLOSIVE, PLASTIC-BONDED, INJECTION MOLDABLE (PBXN-301)

AWWA C222-1999 钢水管装置内部和外部聚氨酯敷层第1版勘误:2000年7月

This standard sets minimum requirements for shop- and field-applied polyurethane interior linings and exterior coatings used in the potable water supply industry.

Polyurethane Coatings For The Interior and Exterior of Steel Water Pipe and Fittings First Edition; Erratum 07/2000

DLA AN3250 REV 1 NOTICE 1-1999 Y水管软管接头

This notice should be filed in fr-ont of AN3250 REV 1, dated 9 April 1947.

COUPLING - CONDUIT Y

SY/T 0510-1998 钢制对焊管件

本标准规定了碳钢、低合金钢及不锈钢制造的对焊管件的尺寸、技术要求、试验方法和标记等，其中包括公称直径15-600mm (1/2-24in)的弯头、异径接头、三通、四通和管帽。 本标准适用于石油、化工、电力、船舶、轻工等工业管道所使用的钢制对焊管件。用户如有特殊要求，经供需双方协商，管件可按特殊要求供货。

Steel but - welding pipe fitting

NAVY MIL-E-82898 (1)-1999 PBX(AF)-108型塑料粘结炸药

This amendment forms a part of MIL-E-82898(NAvy) dated 30 December 1994, and is approved for use by the Deparment of the Navy, and is available for use by all departments and agencies of the Department of Defense. MiL-E-82898(NAvy) remuins inactive for new design, however, the document is valid for acquisition when needed.

EXPLOSIVE, PLASTIC-BONDED, CAST PBX(AF)-108

NAVY MIL-P-8045 B (4)-1999 塑胶制品和非塑胶的密封罐备用塑料材料

This amendment forms a part of MIL-P-8045BY dated 10 April 1964, and is approved for use by all Departments and Agencies of the Department of Defense.

PLASTIC, SELF-SEALING AND NON-SELF-SEALING TANK BACKING MATERIAL

DLA L-P-535 E NOTICE 3-1999 坚硬塑料层:塑料条带:聚芳醚醚酮(氯乙烯)和聚芳醚醚酮(氯乙烯-乙酸乙烯)

The General Services Administration has authorized the use of this commercial item description as a replacement for Military Specifications MIL-V-16720E and MIL-V-16721D which are cancelled.

PLASTIC SHEET (SHEETING): PLASTIC STRIP: POLY(VINYL CHLORIDE) AND POLY(VINYL CHLORIDE-VINYL ACETATE), RIGID

NAVY MIL-L-7806 A (2)-1999 用照明塑料板

This amendment forms a part of MIL-L-7806A7 dated 27 November 1956, and is approved for use by all Departments and Agencies of the Department of Defense.

LIGHT, PANEL, PLASTIC PLATE LIGHTING

NAVY MIL-P-85891 A (2)-1998 去除有机涂料的塑料介质

This amendment forms a part of MIL-P-85891A, dated 1 April 1992, and is approved for use by all Departments and Agencies of the Department of Defense.

PLASTIC MEDIA FOR REMOVAL OF ORGANIC COATINGS

ARMY MIL-PRF-32023-1998 适配器- 5加仑军用塑料燃料罐自两供给MILITARY

This document covers the performance and acceptance requirements for a Gravity Feed Adapter(GFA) which mates with the standard military 5- gallon plastic fuel can.The GFA and can assembly are inverted to provide a gravity fed fuel supply for military tent heaters(see 6.1)

ADAPTER KIT - GRAVITY FEED, FOR 5-GALLON MILITARY PLASTIC FUEL CAN

NAVY MIL-C-24491 B NOTICE 1-1998 MARK 5,MOD 2,和MARK 6气胀式救生艇纤维玻璃塑料增强

MIL-C-Z4491B, including Amendment 1, dated 29 January 1986, isinactive for new design and is no longer used, except forreplacement purposes.

CONTAINER, FIBERGLASS REINFORCED PLASTIC, FOR INFLATABLE LIFEBOATS, MARK 5, MOD 2, AND MARK 6

NAVY MIL-C-24604 NOTICE 2-1998 金属衬里(FRP)聚酯玻璃钢高压汽缸

MIL-C-24604, dated 22 June 1987, is inactive for new design and is no longer used, except for replacement purposes.

CYLINDER, HIGH PRESSURE AIR, FIBERGLASS REINFORCED PLASTIC (FRP), METAL LINED

NAVY MIL-I-22834 A NOTICE 1-1998 带电绝缘电介质塑料薄膜和合成纤维垫压制器

MS18011A, dated 11 April 1966, is inactive for new design and is no longer used, except for replacement purposes.

INSULATION, ELECTRICAL, DIELECTRIC BARRIER, LAMINATED, PLASTIC FILM AND SYNTHETIC FIBER MAT

DLA MS3341 REV B NOTICE 1-1998 使用MS3367塑料栓紧条的塑料安装座架

This notice should be filed in front of MS3341B, dated 21 March 1974. MS3341B is inactive for new design and is no longer used, except for replacement purposes.

BRACKET, MOUNTING, PLASTIC FOR USE WITH MS3367 PLASTIC TIEDOWN STRAPS

DLA A-A-55106 A-1998 塑料口哨

This document covers a plastic whistle with a cork ball and lanyard. The plastic whistle is intended for use by military personnel performing police, guard, drill instruction, and other duties that require the use of a whistle.

WHISTLE, PLASTIC

AIR FORCE A-A-3174-1998 塑料片,聚烯烃

This document covers requirements for polyolefin film.

PLASTIC SHEET, POLYOLEFIN