23.060.01 阀门综合 标准查询与下载

T/CASME 17-2022 气动薄膜单座调节阀

本文件规定了气动薄膜单座调节阀的术语和定义、分类及基本要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存。

Pneumatic diaphragm single seat regulating valve

DB41/T 901-2022 阀门密封面堆焊焊接操作人员考核规则

Evaluation rules for surfacing welding operators of valve sealing surface

T/NXJX 028-2022 控制阀检维修技术规范

本文件规定了气动、电动控制阀下线与拆检过程要求、维修过程要求、装配、附件连接与调校、检测、防腐，包装、运输、贮存，上线等检维修全过程。

Technical specification for control valve servicing

BS EN ISO 28921-1:2022 工业阀门 适用于低温应用的隔热阀 设计、制造和生产测试

1   Scope This document specifies requirements for design, dimensions, material, fabrication and production testing of gate, globe, ball/plug and butterfly valve design types used as isolation valves and check valves for low-temperature applications. This document is applicable to isolation valves for use in low and cryogenic temperature service where the design low-temperature service is -50 °C down to –196 °C. This document does not apply to valves for cryogenic services, designed in accordance with ISO 21011, used with cryogenic vessels. Where the requirements of this document vary from those given in the valve product standards, the requirements of this document apply. This document is applicable to valves with body, bonnet, bonnet extension or cover made of metallic materials. This document is applicable to: — valves of nominal sizes DN : 10; 15; 20; 25; 32; 40; 50; 65; 80; 100; 125; 150; 200; 250; 300; 350; 400; 450; 500; 600; 650; 700; 750; 800; 850; 900; 950; 1 000; 1 050; 1 200; 1 350; 1 400; 1 500; 1 600; 1 650; 1 800, — corresponding to nominal pipe sizes NPS : ⅜; ½; ¾; 1; 1 ¼; 1 ½; 2; 2 ½; 3; 4; 5; 6; 8; 10; 12; 14; 16; 18; 20; 24; 26; 28; 30; 32; 34; 36; 38; 40; 42; 48; 54; 56; 60; 64; 66; 72,

Industrial valves. Isolating valves for low-temperature applications. Design, manufacturing and production testing

T/WZBF 016-2022 阀门零部件 隔环

本标准规定了阀门填料函用隔环形式、尺寸和要求。

Components of valves—Lantern ring

T/WZBF 015-2022 高温快开阀

本文件规定了高温快开阀的术语和定义、结构型式、技术要求、检验与试验方法、检验规则、标志及供货要求。

High temperature quick opening valve

T/WZBF 019-2022 阀门零部件 顶心

本标准规定了顶心的结构形式、尺寸和技术要求。

Components of valves—Top core

T/WZBF 021-2022 阀门零部件 轴承压盖

本标准规定了轴承压盖的结构形式、尺寸和技术要求。

Components of valves-Bearing glands

T/WZBF 014-2022 气动快开截止阀

本标准规定了气动快开截止阀的术语和定义、结构型式、技术要求、检验与试验方法、检验规则、标志及供货要求。

Pneumatic quick opening globe valve

T/WZBF 017-2022 阀门零部件 螺母、螺栓和螺塞

本标准规定了锁紧螺母、压套螺母、T型螺栓、六角螺塞的结构形式、尺寸、材料、要求等内容。

Components of valves—Nuts,bolts and plugs

T/WZBF 018-2022 阀门零部件 填料压盖、填料压套和填料压板

本标准规定了填料压盖、填料压套和填料压板的结构型式、基本尺寸、材料和要求。

Components of valves—Gland,pressure sleeves and plates

T/WZBF 020-2022 阀门零部件 上密封座

本标准规定了上密封座的结构形式、尺寸和技术要求。

Components of valves—Back seats

T/WZBF 013-2022 金属密封球阀

本标准规定了法兰连接、焊接连接及螺纹连接金属密封球阀(以下简称“球阀”)的术语、结构形式、技术要求、材料、装配与调试、试验方法、检验规则、标记、铭牌及供货要求。

Metal-seated ball valve

T/WZBF 010-2022 轴流式止回阀

本标准规定了轴流式止回阀的术语、结构形式、技术要求、材料、检验和试验方法、检验规则、标志、包装、贮运和供货要求等。  

Axial flow check valve

T/WZBF 011-2022 法兰和对夹连接弹性密封蝶阀

本标准规定了法兰和对夹连接弹性密封蝶阀的结构形式、技术要求、材料、试验方法和检验规则、标志、涂漆和储运。

Flanged and wafer resilient seal butterfly valve

T/WZBF 012-2022 大型石油化工装置用高压超高温 波纹管预紧特种新型球阀

本标准规定了法兰连接、焊接连接大型石油化工装置用高压超高温波纹管预紧特种新型球阀（以下简称“球阀”）的术语、结构形式、技术要求、材料、装配与调试、试验方法、检验规则、标记、铭牌及供货。

High pressure ultra-high temperature bellow pretighten special new type ball valve for large scale petrochemical plant

EN ISO 28921-1:2022 工业阀门低温用隔离阀第1部分:设计、制造和生产试验

This document specifies requirements for design, dimensions, material, fabrication and production testing of gate, globe, ball/plug and butterfly valve design types used as isolation valves and check valves for low-temperature applications. This document is applicable to isolation valves for use in low and cryogenic temperature service where the design low-temperature service is -50 °C down to –196 °C. This document does not apply to valves for cryogenic services, designed in accordance with ISO 21011, used with cryogenic vessels. Where the requirements of this document vary from those given in the valve product standards, the requirements of this document apply. This document is applicable to valves with body, bonnet, bonnet extension or cover made of metallic materials. This document is applicable to: — valves of nominal sizes DN: 10; 15; 20; 25; 32; 40; 50; 65; 80; 100; 125; 150; 200; 250; 300; 350; 400; 450; 500; 600; 650; 700; 750; 800; 850; 900; 950; 1 000; 1 050; 1 200; 1 350; 1 400; 1 500; 1 600; 1 650; 1 800, — corresponding to nominal pipe sizes NPS: ⅜; ½; ¾; 1; 1 ¼; 1 ½; 2; 2 ½; 3; 4; 5; 6; 8; 10; 12; 14; 16; 18; 20; 24; 26; 28; 30; 32; 34; 36; 38; 40; 42; 48; 54; 56; 60; 64; 66; 72, and applies to pressure designations: — PN 16; 25; 40; 100; 160; 250; 400, — Class 150; 300; 600; 800; 900; 1 500; 2 500. NOTE Not all type and size combination are available in all pressure ratings. This document does not apply to safety valves and control valves.

Industrial valves - Isolating valves for low-temperature applications - Part 1: Design, manufacturing and production testing (ISO 28921-1:2022)

ISO 28921-1:2022 工业阀门低温用隔离阀第1部分:设计、制造和生产试验

This document specifies requirements for design, dimensions, material, fabrication and production testing of gate, globe, ball/plug and butterfly valve design types used as isolation valves and check valves for low-temperature applications. This document is applicable to isolation valves for use in low and cryogenic temperature service where the design low-temperature service is -50 °C down to –196 °C. This document does not apply to valves for cryogenic services, designed in accordance with ISO 21011, used with cryogenic vessels. Where the requirements of this document vary from those given in the valve product standards, the requirements of this document apply. This document is applicable to valves with body, bonnet, bonnet extension or cover made of metallic materials. This document is applicable to: — valves of nominal sizes DN: 10; 15; 20; 25; 32; 40; 50; 65; 80; 100; 125; 150; 200; 250; 300; 350; 400; 450; 500; 600; 650; 700; 750; 800; 850; 900; 950; 1000; 1050; 1200; 1350; 1400; 1500; 1600; 1650; 1800, — corresponding to nominal pipe sizes NPS: ⅜; ½; ¾; 1; 1 ¼; 1 ½; 2; 2 ½; 3; 4; 5; 6; 8; 10; 12; 14; 16; 18; 20; 24; 26; 28; 30; 32; 34; 36; 38; 40; 42; 48; 54; 56; 60; 64; 66; 72, and applies to pressure designations: — PN 16; 25; 40; 100; 160; 250; 400, — Class 150; 300; 600; 800; 900; 1500; 2500. NOTE Not all type and size combination are available in all pressure ratings. This document does not apply to safety valves and control valves.

Industrial valves — Isolating valves for low-temperature applications — Part 1: Design, manufacturing and production testing

T/CIPR 0020-2022 供水减压阀

供水减压阀在于提供半阀球采用在阀杆与转动块一侧进行定位安装的方式，有效的提高半阀球装配位置的精度，防止对偏心半球阀的工作造成影响

Water supply pressure reducing valve

T/CIPR 027-2022 自动闭合炉体阀门的制作方法

自动闭合炉体阀门的制作方法:阀瓣与阀座相抵，关闭阀体，然后卡接上出水管，出水管上的第四直杆与第五直杆相抵，第五直杆带动梯形滑块向左移动，在第三弹簧的回弹力作用下，第三直杆相对梯形滑块，沿其斜面向上移动，第三直杆与第一直杆分离，此时，即可自由转动手轮，使阀瓣与阀座分离，实现出水，拔下出水管时，第四直杆与第五直杆分离，在第一弹簧的回弹力作用下，第五直杆带动梯形滑块向右移动，梯形滑块的斜面挤压第三直杆，第三直杆与第一直杆重新卡接，固定阀瓣，防止意外触碰手轮，浪费水资源。

Manufacture method of automatic closing furnace body valve