25.140.10 气动工具 标准查询与下载

ISO 11148-6:2010 手持式非电动工具.安全性要求.第6部分:螺纹结件用装配电动工具

IMPORTANT — The electronic file of this document contains colours that are considered useful for the correct understanding of the document. Users should consider printing this document using a colour printer. ISO 3864-1 provides colorimetric and photometric properties together with, as a guideline, references from colour order systems. This part of ISO 11148 applies to hand-held non-electric power tools (hereafter referred to as “assembly power tools for threaded fasteners”) intended for tightening or installing of threaded fasteners. The assembly power tools for threaded fasteners can be powered by compressed air, hydraulic fluid or internal combustion engines and are intended for use by one operator and supported by the operator's hand or hands, with or without a suspension, e.g. a balancer. This part of ISO 11148 covers - air-hydraulic impulse wrenches; - impact wrenches; - fastener installation tools; - nutrunners; - open-ended spanners (crow-foot with open-ended socket or tube nut wrench); - ratchet wrenches; - screwdrivers. NOTE 1 For examples of assembly power tools for threaded fasteners, see Annex B. This part of ISO 11148 does not cover special requirements and modifications of assembly power tools for threaded fasteners for the purpose of mounting them in fixtures. This part of ISO 11148 deals with all significant hazards, hazardous situations or hazardous events when the tools are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, with the exception of the use of assembly power tools for threaded fasteners in potentially explosive atmospheres. NOTE 2 EN 13463-1 gives requirements for non-electrical equipment for potentially explosive atmospheres.

Hand-held non-electric power tools.Safety requirements.Part 6: Assembly power tools for threaded fasteners

ISO 11148-4:2010 手持式非电动工具.安全要求.第4部分:非旋转冲击动力工具

IMPORTANT — The electronic file of this document contains colours that are considered useful for the correct understanding of the document. Users should consider printing this document using a colour printer. ISO 3864-1 provides colorimetric and photometric properties together with, as a guideline, references from colour order systems. This part of ISO 11148 applies to hand-held non-electric power tools (hereafter referred to as “non-rotary percussive power tools”) intended for chipping, riveting, breaking of concrete and asphalt, ramming, etc. The non-rotary percussive power tool can be powered by compressed air, hydraulic fluid or internal combustion engines and is intended for use by one operator and supported by the operator's hand or hands, with or without a suspension, e.g. a balancer. This part of ISO 11148 covers - breakers; - bush hammers; - chipping hammers; - small chisels; - engraving pens; - needle scalers; - pick hammers; - pile drivers; - portable pile drivers; - punches; - rammers; - riveting hammers; - scaling hammers; - stone hammers; - spades; - tampers. NOTE 1 For examples of non-rotary percussive power tools, see Annex B. This part of ISO 11148 does not cover special requirements and modifications on non-rotary percussive power tools for the purpose of mounting in a fixture. This part of ISO 11148 deals with all significant hazards, hazardous situations or hazardous events when the tools are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, with the exception of the use of non-rotary percussive power tools in potentially explosive atmospheres. NOTE 2 EN 13463-1 gives requirements for non-electrical equipment for potentially explosive atmospheres.

Hand-held non-electric power tools. Safety requirements. Part 4: Non-rotary percussive power tools

JB/T 5128-2010 端面气动砂轮机

本标准规定了端面气动砂轮机的基本参数、技术要求、试验方法、检验规则和标志、包装、运输和贮存。 本标准适用于以压缩空气为动力的端面气动砂轮机(以下简称产品)。

Pneumatic vertical grinders

JB/T 9851-2010 手持式气动捆扎锁紧机

本标准规定了手持式气动捆扎锁紧机的型式与基本参数、技术要求、试验方法、检验规则和标志、包装、运输和贮存。 本标准适用于以压缩空气为动力的手持式气动捆扎锁紧机。

Hand-held pneumatic locker of strapping

JB/T 9852-2010 手持式气动捆扎拉紧机

本标准规定了手持式气动捆扎拉紧机的型式与基本参数、技术要求、试验方法、检验规则和标志、包装、运输和贮存。 本标准适用于以压缩空气为动力的手持式气动捆扎拉紧机(以下简称产品)。

Hand-held pneumatic puller of strapping

JB/T 7739-2010 气动打钉机

本标准规定了气动打钉机的产品型式、基本参数与尺寸、技术要求、检验方法、检验规则、标志、包装、运输和贮存。 本标准适用于以压缩空气为动力的手持式气动打针机(以下简称产品)。

Air nailers

JB/T 9850-2010 气动铆钉机

本标准规定了气动铆钉机的型式与基本参数,技术要求,试验方法和检验规则及标志、包装、运输和贮存。 本标准适用于气动铆钉机(以下简称产品)。

Pneumatic riveting hammers

JB/T 9847-2010 气钻

本标准规定了气钻的型式与基本参数、技术要求、试验方法、检验规则和标志、包装、运输和贮存。 本标准适用于以压缩空气为动力的气钻(以下简称产品)。

Pneumatic drills

DS/EN 792-13+A1:2008 手持式非电动工具-安全要求-第13部分：紧固件驱动工具

This standard is applicable to fastener driving tools which are handled by one person and in which energy in a linear movement is applied to a loaded fastener for the purpose of driving this into a workpiece of a determined material. During the driving operation, the fastener leaves the tool partially or entirely, with sufficient velocity to overcome the resistance of penetration, and forms a mechanical connection or attachment of different workpieces. The energy required for driving a fastener is provided by compressed air or combustible gases.NOTE 1 Fastener driving tools are also referred to for example as Nailers, Staplers, Tackers, Pinners.NOTE 2 The w

Hand-held non-electric power tools - Safety requirements - Part 13: Fastener driving tools

SNI 7425-2008 压缩式喷水器. 性能和试验方法

Hand sprayer compression - Performance and testing methods

JB/T 8411-2006 冲击式气扳机

本标准规定了冲击式气扳机的型式与基本参数、技术要求、检验方法、检验规则和标志、包装、运输与贮存。 本标准适用于以压缩空气为动力，具有冲击机构的冲击式气扳机。 本标准不适用于定扭矩冲击式气扳机和纯扭式气扳机。

Pneumatic impact wrenches

JB/T 8412-2006 气铲

本标准规定了气铲的型式与基本参数、技术要求、检验方法、检验规则和标志、包装、运输与贮存。 本标准适用于以压缩空气为动力的气铲（以下简称产品）的设计、制造、验收与使用。

Pneumatic chipping hammers

JB/T 7172-2006 直柄式气动砂轮机

本标准规定了直柄式气动砂轮机的基本参数、技术要求、检验方法、检验规则和标志、包装、运输与贮存。 本标准适用于直柄式气动砂轮机（以下简称产品）。

Straight pneumatic grinders

KS B ISO 5393-2005(2010) 螺纹紧固件用旋转工具性能试验方法

Rotary tools for threaded fasteners－Performance test method

KS B ISO 2787-2005(2010) 旋转和冲击式气动工具性能试验

Rotary and percussive pneumatic tools－Performance tests

KS B ISO 6544-2005(2010) 螺纹紧固件安装用手持式气动装配工具反作用扭矩和扭矩脉冲测量

Hand-held pneumatic assembly tools for installing threaded fasteners－Reaction torque and torque impulse measurements

KS B ISO 1180-2005(2010) 气动工具柄和卡盘衬套的接头尺寸

Shanks for pneumatic tools and fitting dimensions of chuck bushings

KS B 4000-2004(2009) 气动盘式磨床

Pneumatic disc grinders

JB/T 5129-2004 纯扭式气动螺丝刀

　　本标准规定了纯扭式气动螺丝刀的型式与基本参数、技术要求、试验方法、检验规则和标志、包装、运输及贮存等。 　　本标准适用于纯扭式气动螺丝刀。

Non-impact pneumatic screwdrivers

ANSI SNT 101-2002 动力工具.便携式压缩空气驱动的紧固件旋入工具的安全要求

Comprises safety standard for design, construction, installation, maintenance of portable, hand-held compressed-air powered fastener driving tools.Safety standard for design, construction, installation, maintenance of portable, hand-held compressed-air powered fastener driving tools. This standard was listed for public review in the 7/28/2000 issue of Standards Action. It is being resubmitted due to substantive changes to the text.

Power Tools – Portable, Compressed Air Actuated, Fastener Driving Tools – Safety Requirements for