25.160.10 焊接工艺 标准查询与下载

PN-EN 14730-2-2021-09 E 铁路应用 轨道 铁轨的铝热焊 第2部分：铝热焊工的资格、承包商的认可和焊缝的验收

Railway applications -- Track -- Aluminothermic welding of rails -- Part 2: Qualification of aluminothermic welders, approval of contractors and acceptance of welds

21/30427299 DC BS EN ISO 15614-4 金属材料焊接工艺规范和鉴定 焊接工艺试验第4部分：铝铸件的精焊

BS EN ISO 15614-4. Specification and qualification of welding procedures for metallic materials. Welding procedure test - Part 4. Finishing welding of aluminium castings

prEN ISO 15614-6:2021 金属材料焊接工艺规范和评定 焊接工艺试验 第6部分：铜及其合金的电弧焊和气焊（ISO/DIS 15614-6:2021）

Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 6: Arc and gas welding of copper and its alloys (ISO/DIS 15614-6:2021)

prEN ISO 15614-4:2021 金属材料焊接工艺规范和评定 焊接工艺试验 第4部分：铝铸件的精焊（ISO/DIS 15614-4:2021）

Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 4: Finishing welding of aluminium castings (ISO/DIS 15614-4:2021)

KS B ISO TR 17671-5-2021 焊接 金属材料焊接的建议 第5部分：复合钢的焊接

Welding — Recommendations for welding of metallic materials — Part 5:Welding of clad steels

OENORM EN 15085-1-2021 铁路应用 铁路车辆和部件的焊接 第1部分：总则

Railway applications - Welding of railway vehicles and components - Part 1: General

OENORM EN 14163-2021 石油和天然气工业 管道运输系统 管道焊接（ISO 13847:2013，已修改）

Petroleum and natural gas industries - Pipeline transportation systems - Welding of pipelines (ISO 13847:2013, modified)

FprEN ISO 15614-13:2021 金属材料焊接工艺规范和评定 焊接工艺试验 第13部分：镦锻（电阻对接）和闪光焊（ISO/FDIS 15614-13:2021）

Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 13: Upset (resistance butt) and flash welding (ISO/FDIS 15614-13:2021)

prEN ISO 15610:2021 金属材料焊接程序的规范和评定 基于测试焊接材料的评定（ISO/DIS 15610:2021）

Specification and qualification of welding procedures for metallic materials - Qualification based on tested welding consumables (ISO/DIS 15610:2021)

PN-EN ISO 9013-2017-04 P 热切割 热切割的分类 几何产品规格和质量公差（ISO 9013:2017）

Thermal cutting -- Classification of thermal cuts -- Geometrical product specification and quality tolerances (ISO 9013:2017)

PN-EN ISO 18595-2021-07 E 电阻焊 铝和铝合金的点焊 可焊性、焊接和试验（ISO 18595:2021）

Resistance welding -- Spot welding of aluminium and aluminium alloys -- Weldability, welding and testing (ISO 18595:2021)

OENORM EN 14587-2-2021 铁路应用 基础设施 钢轨的闪光对焊 第2部分：在固定工厂以外的地点使用移动焊机的新 R200、R220、R260、R260Mn、R320Cr、R350HT、R350LHT、R370CrHT 和 R400HT 级钢轨

Railway applications - Infrastructure - Flash butt welding of rails - Part 2: New R200, R220, R260, R260Mn, R320Cr, R350HT, R350LHT, R370CrHT and R400HT grade rails by mobile welding machines at sites other than a fixed plant

GSO ISO/TR 22824:2021 焊接材料 规范中预测和测量的 FN IIW 第九委员会专家的立场声明

ISO/TR 22824:2003 provides guidance, based on the experience of experts, for setting appropriate requirements, in specifications and other standards and contract documents, on ferrite content of nominally austenitic or duplex ferritic-austenitic stainless steel weld metals.

Welding consumables — Predicted and measured FN in specifications — A position statement of the experts of IIW Commission IX

OENORM EN ISO 18785-5:2021 摩擦搅拌点焊 铝 第5部分：质量和检验要求（ISO 18785-5:2018）

Friction stir spot welding - Aluminium - Part 5: Quality and inspection requirements (ISO 18785-5:2018)

GSO ISO 25239-2:2021 搅拌摩擦焊 铝 第2部分：焊缝设计

ISO 25239-2:2011 specifies design requirements for friction stir weld joints. In ISO 25239-2:2011, the term "aluminium" refers to aluminium and its alloys. ISO 25239-2:2011 does not apply to friction stir spot welding.

Friction stir welding — Aluminium — Part 2: Design of weld joints

GSO ISO 16432:2021 电阻焊 使用压花突出物对无涂层和涂层低碳钢进行凸焊的程序

ISO 16432:2006 specifies requirements for embossed-resistance-projection welding in the fabrication of assemblies of uncoated and metallic coated low carbon steel comprising two thicknesses of metal, where the maximum single sheet thickness of components to be welded is within the range 0,4 mm to 3 mm for the following materials: uncoated steels;hot-dip zinc or iron-zinc alloy (galvannealed) coated steel;electrolytic zinc, zinc-iron, or zinc-nickel coated steel;aluminium coated steel;zinc-aluminium coated steel. Organic coated or primer coated steels are not covered by ISO 16432:2006.

Resistance welding — Procedure for projection welding of uncoated and coated low carbon steels using embossed projection(s)

GSO ISO 25239-5:2021 搅拌摩擦焊 铝 第5部分：质量和检验要求

ISO 25239-5:2011 specifies a method for determining the capability of a manufacturer to use the friction stir welding (FSW) process for production of products of the specified quality. It specifies quality requirements, but does not assign those requirements to any specific product group. In ISO 25239-5:2011, the term "aluminium" refers to aluminium and its alloys. ISO 25239-5:2011 does not apply to friction stir spot welding.

Friction stir welding — Aluminium — Part 5: Quality and inspection requirements

GSO ISO 25239-4:2021 搅拌摩擦焊 铝 第4部分：焊接工艺规范和鉴定

ISO 25239-4:2011 specifies the requirements for the specification and qualification of welding procedures for the friction stir welding (FSW) of aluminium. In ISO 25239-4:2011, the term "aluminium" refers to aluminium and its alloys. ISO 25239-4:2011 does not apply to friction stir spot welding.

Friction stir welding — Aluminium — Part 4: Specification and qualification of welding procedures

OENORM EN ISO 18785-4:2021 摩擦搅拌点焊 铝 第4部分：焊接程序规范和鉴定（ISO 18785-4:2018）

Friction stir spot welding - Aluminium - Part 4: Specification and qualification of welding procedures (ISO 18785-4:2018)

GSO ISO 17916:2021 热切割机的安全

ISO 17916:2016 specifies the safety requirements and measures for machinery covering design, construction, production, transport, installation, operation, maintenance, and putting out of service. ISO 17916:2016 applies to machinery using thermal cutting and or marking processes such as oxy-fuel, plasma arc. This International Standard applies to machinery the basis of which is either designed as open gantry, cantilever machine, or the track of which is incorporated in the cutting table. ISO 17916:2016 does not cover design standards for specific tools, e.g. oxy-fuel hose standards, electrical requirements for plasma power supplies. Most tools used on thermal cutting machines have specific design standards. ISO 17916:2016 does not cover handheld cutting equipment and cutting equipment which is combined with a constrained tracking system mounted on the work piece. Risks arising from thermal cutting tools may be covered by related standards. Risks arising from laser radiation, except those caused by position indicating lasers, are not covered by this International Standard. Those risks are covered by ISO 11553. Machines that combine thermal processes with other processes (e.g. grinding, drilling, milling, etc.) are only partly covered. Risks arising from these other processes may be covered by related standards.

Safety of thermal cutting machines