25.200 热处理 标准查询与下载

ISO/FDIS 2107:2023 铝和铝合金 锻造产品 状态名称

Aluminium and aluminium alloys — Wrought products — Temper designations

ISO 20431:2023 热处理 质量控制

Heat treatment — Control of quality

T/CHES 80-2022 液压启闭机活塞杆陶瓷复合涂层技术规范

Technical specifications for ceramic composite coating on piston rods of hydraulic hoists

T/SASE 004-2022 奥氏体不锈钢焊管生产在线固溶热处理工艺规范

主要内容主要围绕奥氏体不锈钢焊管TIG焊接生产过程中在线固溶处理的加热、保温、冷却和安全要求等方面有关要求进行规定： （1）在线固溶处理加热温度与加热方式 主要是对奥氏体不锈钢焊管焊接生产过程中在线固溶处理加热方式、加热温度等方面的要求。 （2）在线固溶处理保温 主要对于奥氏体不锈钢焊管焊接生产过程中在线固溶处理保温温度、保温方式、保温时间等方面的设置和要求。 （3）在线固溶处理冷却 对奥氏体不锈钢焊管在线固溶处理冷却介质、冷却方式、冷却介质等冷却工艺参数和指标要求作出规定。 （4）在线固溶处理焊管性能检测 在固溶处理试验完成后，需对固溶处理后的不锈钢管件进行力学性能测试，评定固溶处理工艺是否能够达到性能调控目的，主要力学性能测试方法有硬度测试、管件扩口试验、压扁试验、膨胀试验等。 （5）在线固溶处理安全要求 主要是对在线固溶处理工艺过程保护气体等安全防护要求。

Online solid solution heat treatment specification in welding production of austenitic stainless steel welded pipe

ASTM A991/A991M-22 钢制品热处理炉温度均匀性测量的标准试验方法

1.1 This test method covers the procedures used to conduct a temperature uniformity survey on a furnace used to heat treat steel products. This method is used to determine the capability of the furnace to meet the permissible temperature variation specified in the applicable product specification, or as agreed to by the purchaser and supplier of heat treat services. Survey documentation requirements, and the procedure used to subsequently establish the furnace working zone, are defined in this test method. 1.2 This test method covers heat treat furnaces in any of the following categories: 1.2.1 Continuous or semi-continuous conveyance furnaces, 1.2.2 Batch furnaces, and 1.2.3 Salt or liquid baths and fluidized beds. 1.3 This test method only applies when specified in the product specification or the purchase order. 1.4 Controlling a heat treatment of steel products using thermocouples attached to the extremities of each load is an alternative to performing a furnace survey. The producer shall adhere to Annex A1. 1.5 By mutual agreement between the purchaser and the supplier of heat treat services, more stringent and/or additional requirements may be specified. The acceptance of any such additional requirements shall be dependent on negotiations with the supplier and must be included in the order as agreed upon by the purchaser and supplier. 1.6 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Conducting Temperature Uniformity Surveys of Furnaces Used to Heat Treat Steel Products

T/CHTA 007-2021 热处理行业产品质量创新企业条件及评定办法

本标准规定了热处理行业产品质量创新企业的申报条件和评定办法。 本标准适用于从事热处理工艺装备、热处理工艺装备及设备备件、热处理工艺材料、热处理设备配套仪器仪表、热处理质量检验设备仪器生产制造的企业申报热处理行业产品质量创新企业的评定工作。

Conditions and evaluation methods for product quality innovation enterprises in the heat treatment industry

T/CSTM 00546-2021 承压设备局部焊后热处理规程

本文件规定了承压设备局部焊后热处理的术语和定义、单加热区局部焊后热处理、主副加热区局部焊后热处理、热处理技术准备、加热设备、温度测量设备及保温毯、温度测量与温度控制、焊后热处理文件。 本文件适用于承压设备环向焊接接头（包含筒体环向焊接接头、接管与壳体连接的焊接接头、嵌入式补强件与壳体连接的焊接接头等），以及上述焊接接头的返修部位。纵向焊接接头的返修也可参照执行。

Code of practice for the local postweld heat treatment for pressure vessels

NF A02-052:2021 工具和机械零件 黑色金属产品的渗氮和氮碳共渗

Tools and mechanical parts - Nitriding and nitrocarburizing of ferrous products

PN-EN ISO 4885-2018-05 P 黑色金属材料 热处理 词汇（ISO 4885:2018）

Ferrous materials -- Heat treatments -- Vocabulary (ISO 4885:2018)

T/CIESC 0013-2021 工业微波设备加热均匀性标准

本文件规定了应用于工业微波85℃以下加热过程中的加热均匀性等级、均匀性测试方法。  本文件适用于利用频率在工、科、医（ISM）频段（433MHz、915MHz、2450MHz、5800MHz）的微波能量来加热工业物料并且额定输入功率在1000W以上的工业微波设备，包括微波单功能的工业设备、与其他形式能量共同作用的工业设备。  本文件不适用于家用领域的微波设备。

Standard for heating uniformity of industrial microwave equipment

GOST R 59734-2021 光学和光子学 金属材料激光堆焊 工艺流程

Optics and photonics. Laser surfacing with metal materials. Technological process

GOST R 59421-2021 光学和光子学 金属材料激光熔覆 术语和定义

Optics and photonics. Laser cladding by metal materials. Terms and definitions

GOST R 59673-2021 光学和光子学 钛和铝合金零件的激光热处理 工艺过程

Optics and photonics. Laser heat treatment of titanium and aluminum alloy parts. Technologic alprocess

ASTM B918/B918M-20a 锻铝合金热处理标准实践

1.1 This practice is intended for use in the heat treatment of wrought aluminum alloys for general purpose applications. 1.1.1 The heat treatment of wrought aluminum alloys used in specific aerospace applications is covered in AMS2772. 1.1.2 Heat treatment of aluminum alloy castings for general purpose applications is covered in Practice B917/B917M. 1.2 Times and temperatures appearing in the heat-treatment tables are typical for various forms, sizes, and manufacturing methods and may not provide the optimum heat treatment for a specific item. 1.3 Some alloys in the 6xxx series may achieve the T4 temper by quenching from within the solution temperature range during or immediately following a hot working process, such as upon emerging from an extrusion die. Such alternatives to furnace heating and immersion quenching are indicated in Table 1, by footnote L, for heat treatment of wrought aluminum alloys. However, this practice does not cover the requirements for a controlled extrusion press or hot rolling mill solution heat treatment; it only covers the requirements of artificial aging, annealing and associated pyrometry of those processes for products solution heat treated in accordance with Practices B807/B807M and B947. (Refer to Practice B807/B807M for extrusion press solution heat treatment of aluminum alloys and to Practice B947 for hot rolling mill solution heat treatment of aluminum alloys and associated pyrometry.) 1.4 Units—The values stated in either Metric or US Customary units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Heat Treatment of Wrought Aluminum Alloys

ASTM B917/B917M-12(2020) 所有工艺中铝合金铸件热处理的标准实践

1.1 This practice covers, when specified by material specification or purchase order, the heat treatment of aluminum alloy castings from all casting processes. 1.1.1 The heat treatment of aluminum alloy castings used in specific aerospace applications is covered in AMS 2771 and specific AMS material specifications. 1.1.2 The heat treatment of wrought aluminum alloys is covered in Practice B918/B918M. 1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Heat Treatment of Aluminum-Alloy Castings From All Processes

T/CHTA 006-2020 真空热处理设备能效限定值、能效等级及节能措施

本标准按GB/T 1.1给出的规则起草。  请注意本文件的某些内容可能涉及专利，本文件的发布机构不承担识别这些专利的 责任。  本标准由中国热处理行业协会标准化工作委员会提出。  本标准由中国热处理行业协会归口。 

Energy efficiency limit value, energy efficiency grade and energy saving measures of vacuum heat treatment equipment

ASTM B918/B918M-20 锻铝合金热处理标准实践

Standard Practice for Heat Treatment of Wrought Aluminum Alloys

T/CHTA 001-2019 热处理常用危险化学品使用存储安全管理规范

本标准按GB/T 1.1给出的规则起草。  请注意本文件的某些内容可能涉及专利，本文件的发布机构不承担识别这些专利的责任。  本标准由中国热处理行业协会提出并归口。

Safety management regulations for the use and storage of commonly used hazardous chemicals in heat treatment

KS B 6846-2019 真空热处理炉试验规范

Test code of vacuum heat treatment furnace

T/CHTA 002-2019 绿色环保热处理生产制造技术规范

本标准按GB/T 1.1—2009给出的规则起草。  请注意本文件的某些内容可能涉及专利，本文件的发布机构不承担识别这些专利的责任。  本标准由中国热处理行业协会提出并归口。 

Technical specification for green heat treatment production and manufacturing