27.070 燃料电池 标准查询与下载

JIS C 8826:2011 网状互连的小聚合物电解液燃料电池动力系统的功率调节器用测试方法

Testing methods of power conditioner for grid interconnected small fuel cell power systems

JIS C 8827:2011 多连接效用小聚合物电解液燃料电池电力系统功率调节器用孤立预防措施的试验规程

Testing procedure of islanding prevention measures for utility-interconnected small polymer electrolyte fuel cell power system power conditioners

DB41/ 647-2010 液化石油气二甲醚复合燃料

本标准规定了液化石油气二甲醚复合燃料的要求、试验方法、检验规则、标志、包装、运输、储存和充装。本标准适用于河南省行政区域内液化石油气二甲醚复合燃料。

Liquefied Petroleum Gas DME Composite Fuel

DB41/ 646-2010 民用燃料二甲醚

本标准规定了民用燃料二甲醚的要求、试验方法、检验规则及标志、包装、运输、贮存、充装、使用和安全。本标准适用于河南省行政区域内城乡居民、商业和工业企业的民用燃料二甲醚。

civil fuel dimethyl ether

IEC 105/309/DPAS:2010 IEC/PAS 62282-6-150:燃料电池技术.第6-150部分:微燃料电池动力系统.安全性.间接PEM燃料电池中的水反应(UN分度4.3)化合物

IEC/PAS 62282-6-150: Fuel cell technologies - Part 6-150: Micro fuel cell power systems - Safety - Water reactive (UN devision 4.3) compounds in indirect PEM fuell cells

LST EN 62282-6-100-2010 燃料电池技术 第 6-100 部分：微型燃料电池动力系统 安全性（IEC 62282-6-100:2010）

Fuel cell technologies -- Part 6-100: Micro fuel cell power systems - Safety (IEC 62282-6-100:2010)

BS EN 62282-6-300:2009 燃料电池技术.微型燃料电池发电系统.燃料筒的互换性

This International Standard covers interchangeability of micro fuel cell (MFC) fuel cartridges to provide the cartridge compatibility for a variety of MFC power units while maintaining the safety and performance of MFC power systems. For this purpose, the standard covers fuel cartridges and their connector designs. Fuel type, fuel concentration and fuel quality are also covered. This standard also provides for the means to avoid the miss-connection of an improper fuel cartridge. Test methods for verifying the compliance with the interchangeability requirements for fuel and fuel cartridges are also provided in this standard. IEC/PAS 62282-6-1 and IEC 62282-6-200 do not cover fuel cartridge or fuel from the cartridge. IEC 62282-6-300 describes the performance test methods of fuel cartridges, the fuel from the cartridge, and markings to realize the interchangeability of fuel cartridges. These include performance effect of fuel cartridges, such as fuel quality which may affect the performance of MFC power units and usable fuel volume from fuel cartridges. A MFC power system block diagram is shown in Figure 1. MFC power systems and MFC power units are defined as those wearable or easily carried by hand, providing d.c. outputs that do not exceed 60 V d.c. and power outputs that do not exceed 240 VA. This standard covers the fuel cartridge for MFC power units and the mechanical interface of connectors between fuel cartridges and MFC power units. The main body of this standard includes methanol liquid fuel cartridges, including methanol and water solution. Annex A shows the background used to determine the forces expected in normal operation and in foreseeable misuse. Annex B shows the example design for test fixtures for the fuel connector and fuel cartridge type tests.

Fuel cell technologies - Micro fuel cell power systems - Fuel cartridge interchangeability

BS EN 62282-6-300:2010 燃料电池技术 微型燃料电池发电系统 燃料筒的互换性

Fuel cell technologies - Micro fuel cell power systems - Fuel cartridge interchangeability

DS/EN 62282-6-100:2010 燃料电池技术 第 6-100 部分：微型燃料电池动力系统 安全

IEC 62282-6-100:2010(E) covers micro fuel cell power systems, micro fuel cell power units and fuel cartridges that are wearable or easily carried by hand, providing d.c. outputs that do not exceed 60 V d.c. and power outputs that do not exceed 240 VA. Establishes requirements for all micro fuel cell power systems, micro fuel cell power units and fuel cartridges to ensure a reasonable degree of safety for normal use, reasonably foreseeable misuse, and consumer transportation of such items. The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a

Fuel cell technologies - Part 6-100: Micro fuel cell power systems - Safety

DIN EN 62282-6-300:2010 燃料电池技术. 第6-300部分: 微型燃料电池动力系统. 燃料元件互换性（IEC 62282-6-300: 2009）; 德文版本 EN 62282-6-300: 2009

Fuel cell technologies - Part 6-300: Micro fuel cell power systems - Fuel cartridge interchangeability (IEC 62282-6-300:2009); German version EN 62282-6-300:2009

IEC TS 62282-7-1:2010 燃料电池技术.第7-1部分:燃料电池(PEFC)用单电池试验方法

This part of IEC 62282 covers cell assemblies, test apparatus, measuring instruments and measuring methods, performance test methods, and test reports for PEFC single cells. This Technical Specification is used for evaluating: a) the performance of membrane electrode assemblies (MEAs) for PEFCs, b) materials or structures of other components of PEFCs, or c) the influence of impurities in fuel and/or in air on the fuel cell performance.

Fuel cell technologies - Part 7-1: Single cell test methods for polymer electrolyte fuel cell (PEFC)

BS EN 62282-6-100:2010+A1:2012 燃料电池技术. 微型燃料电池发电系统. 安全

Fuel cell technologies. Micro fuel cell power systems. Safety

BS EN 62282-6-100:2010 燃料电池技术.微型燃料电池动力系统.安全性

a) This consumer safety standard covers micro fuel cell power systems, micro fuel cell power units and fuel cartridges that are wearable or easily carried by hand, providing d.c. outputs that do not exceed 60 V d.c. and power outputs that do not exceed 240 VA. Portable fuel cell power systems that provide output levels that exceed these electrical limits are covered by IEC 62282-5-1. b) Externally accessible circuitry is therefore considered to be safety extra low voltage (SELV) circuitry as defined in IEC 60950-1:2005, and as limited power circuits if further compliance with 2.5 of IEC 60950-1:2005 is demonstrated. Micro fuel cell power systems or units that have internal circuitry exceeding 60 V d.c. or 240 VA should be appropriately evaluated in accordance with the separate criteria of IEC 60950-1:2005. c) This consumer safety standard covers all micro fuel cell power systems, micro fuel cell power units and fuel cartridges. This standard establishes requirements for all micro fuel cell power systems, micro fuel cell power units and fuel cartridges to ensure a reasonable degree of safety for normal use, reasonably foreseeable misuse, and consumer transportation of such items. The fuel cartridges covered by this standard are not intended to be refilled by the consumer. Fuel cartridges refilled by the manufacturer or by trained technicians shall meet all requirements of this standard. d) These products are not intended for use in hazardous areas as defined by IEV 426-03-01.

Fuel cell technologies - Micro fuel cell power systems - Safety

NF C56-282-6-300:2010 燃料电池技术.第6-300部分:微型燃料电池发电系统.燃料筒的互换性.

Fuel cell technologies - Part 6-300 : micro fuel cell power systems - Fuel cartridge interchangeability.

IEC 62282-1:2010 燃料电池技术.第1部分:术语

This part of IEC 62282 provides uniform terminology in the forms of diagrams, definitions and equations related to fuel cell technologies in all applications including but not limited to stationary power, transportation, portable power and micro power applications. Not found here are words and phrases, which can be found in standard dictionaries, engineering references or the IEC 60050 series.

Fuel cell technologies – Part 1: Terminology

DS/EN 62282-6-300:2010 燃料电池技术 第 6-300 部分：微型燃料电池动力系统 燃料盒互换性

IEC 62282-6-300:2009 covers interchangeability of micro fuel cell (MFC) fuel cartridges to provide the cartridge compatibility for a variety of MFC power units while maintaining the safety and performance of MFC power systems. For this purpose, the standard covers fuel cartridges and their connector designs, fuel type, fuel concentration and fuel quality. Also provides for the means to avoid the miss-connection of an improper fuel cartridge. Test methods for verifying the compliance with the interchangeability requirements for fuel and fuel cartridges are also provided.

Fuel cell technologies - Part 6-300: Micro fuel cell power systems - Fuel cartridge interchangeability

IEC 62282-6-100:2010 燃料电池技术.第6-100部分:微型燃料电池动力系统.安全性

a) This consumer safety standard covers micro fuel cell power systems, micro fuel cell power units and fuel cartridges that are wearable or easily carried by hand, providing d.c. outputs that do not exceed 60 V d.c. and power outputs that do not exceed 240 VA. Portable fuel cell power systems that provide output levels that exceed these electrical limits are covered by IEC 62282-5-1. b) Externally accessible circuitry is therefore considered to be safety extra low voltage (SELV) circuitry as defined in IEC 60950-1:2005, and as limited power circuits if further compliance with 2.5 of IEC 60950-1:2005 is demonstrated. Micro fuel cell power systems or units that have internal circuitry exceeding 60 V d.c. or 240 VA should be appropriately evaluated in accordance with the separate criteria of IEC 60950-1:2005. c) This consumer safety standard covers all micro fuel cell power systems, micro fuel cell power units and fuel cartridges. This standard establishes requirements for all micro fuel cell power systems, micro fuel cell power units and fuel cartridges to ensure a reasonable degree of safety for normal use, reasonably foreseeable misuse, and consumer transportation of such items. The fuel cartridges covered by this standard are not intended to be refilled by the consumer. Fuel cartridges refilled by the manufacturer or by trained technicians shall meet all requirements of this standard. d) These products are not intended for use in hazardous areas as defined by IEV 426-03-01.

Fuel cell technologies - Part 6-100: Micro fuel cell power systems - Safety

LST EN 62282-6-300-2010 燃料电池技术 第 6-300 部分：微型燃料电池动力系统 燃料盒互换性（IEC 62282-6-300:2009）

Fuel cell technologies -- Part 6-300: Micro fuel cell power systems - Fuel cartridge interchangeability (IEC 62282-6-300:2009)

GOST R 54111.2-2010 燃料电池道路车辆.安全规范.第2部分.压缩氢燃料车辆对氢危险的防护

Fuel cell road vehicles. Safety specifications. Part 2. Protection against hydrogen hazards for vehicles fuelled with compressed hydrogen

GOST R 54111.1-2010 燃料电池道路车辆.安全规范.第1部分.车辆功能安全

Fuel cell road vehicles. Safety specifications. Part 1. Vehicle functional safety