27.080 热泵 标准查询与下载

NB/T 11236-2023 商用或工业用及类似用途空气源二氧化碳热泵供暖机组

Air source carbon dioxide heat pump heating units for commercial or industrial use and similar purposes

NB/T 11240-2023 空气源热泵干燥系统节能量和减排量计算方法

Calculation method of energy saving and emission reduction of air source heat pump drying system

T/HSSX 0009-2023 空气源热泵热水工程施工及验收规范

本标准规定了商业或工业用空气源热泵热水工程的施工 、验收要求。  本标准适用于以空气为热源的商业或工业用及类似用途的热泵热水机、储热水箱、水泵和管路部件组成的热水工程（不包括室内的供水管路部分）。 其他热源热泵的供热水工程也可参照使用。

Specifications for construction and acceptance of air source heat pump hot water engineering

T/HSSX 0010-2023 户用及类似用途空气源热泵采暖机组

本标准规定了户用及类似用途的空气源热泵采暖机组（以下简称“机组勺的术语和定义、分类和编 码 、试验工况 、技术要求 、试验方法 、检验规则 、标志、随行文件 、包装 、运输和储存 。） 本标准适用于额定制热量不大于35KW，以空气热能为热源，以提供热水采暖为主要功能的户用空气源热泵机组。

Household and similar air source heat pump heating units

T/HEBQIA 157-2023 SRY系列高温热媒循环泵

本文件规定了SRY系列高温热媒循环泵的型式、技术要求、试验方法、检验规则及标志、使用说明、包装、贮存。

SRY series high temperature heat medium circulation pump

T/HEBQIA 156-2023 RYT型温控机专用热油泵

本文件规定了RYT型温控机专用热油泵的型式、技术要求、试验方法、检验规则及标志、使用说明、包装、贮存的要求。

RYT type temperature control machine dedicated hot oil pump

ISO/DIS 19967-2 空气对水热泵“性能测试和评级”第2部分：空间加热和/或空间冷却

Air to water Heat pumps — Testing and rating for performance — Part 2: Space heating and/or space cooling

ISO/DIS 21978 空对水热泵 部分负荷条件下的测试和评级以及空间供暖性能季节性系数的计算

Air to water heat pumps — Testing and rating at part load conditions and calculation of seasonal coefficient of performance for space heating

ISO/FDIS 21978:2023 空气-水热泵 部分负荷条件下的测试和评级以及空间供暖季节性性能系数的计算

Air to water heat pumps — Testing and rating at part load conditions and calculation of seasonal coefficient of performance for space heating

ISO/CD 19967-3 空气对水热泵“性能测试和评级”第3部分：组合热水供应和空间加热和/或空间冷却

Air to water Heat pumps — Testing and rating for performance — — Part 3: Combined hot water supply and space heating and/or space cooling

ISO/DIS 24664 制冷系统和热泵 泄压装置及其相关管路 计算方法

Refrigerating systems and heat pumps — Pressure relief devices and their associated piping — Methods for calculation

ISO 21922:2021/DAmd 1 制冷系统和热泵 阀门 要求、测试和标记 修正案 1

Refrigerating systems and heat pumps — Valves — Requirements, testing and marking — Amendment 1

ISO/DIS 14903 制冷系统和热泵 部件和接头的密封性鉴定

Refrigerating systems and heat pumps — Qualification of tightness of components and joints

ISO 14903:2017/FDAmd 1 制冷系统和热泵 部件和接头的密封性鉴定 修正案1

Refrigerating systems and heat pumps — Qualification of tightness of components and joints — Amendment 1

EN ISO 22712:2023 制冷系统和热泵.人员能力

This document defines the activities related to refrigerating systems according to ISO 5149‑1, ISO 5149‑2, ISO 5149‑3 and ISO 5149‑4 and other equivalent standards, such as EN 378‑1, EN 378‑2, EN 378‑3, EN 378‑4 and the associated competence profiles. It also establishes the competence criteria for persons who carry out these activities. Activities concerning electricity are excluded. NOTE 1 As a refrigerating circuit is considered not to incorporate electrical and electronic systems, activities in this area are not part of this document. National regulations or appropriate International or national standards can be referred to for competence on electrical and electronic systems. NOTE 2 This document does not apply to persons carrying out work on self‑contained refrigerating systems as defined in ISO 5149‑1 or EN 378‑1, from the initial design of the product to the complete manufacture of the product, provided the process is controlled and the methods used are checked by an organization or individual responsible for the conformance with statutory requirements on health, safety and environment (e.g. energy efficiency). NOTE 3 This document does not constitute a training programme.

Refrigerating systems and heat pumps - Competence of personnel (ISO 22712:2023)

23/30450673 DC BS ISO 19967-2 空气到水热泵 性能测试和评级 第 2 部分：空间供暖和/或空间制冷

BS ISO 19967-2. Air to water Heat pumps. Testing and rating for performance - Part 2. Space heating and/or space cooling

ISO 22712:2023 制冷系统和热泵.人员能力

This document defines the activities related to refrigerating systems according to ISO 5149-1, EN 378-3,[5] EN 378-4[6] and the associated competence profiles. It also establishes the competence criteria for persons who carry out these activities. Activities concerning electricity are excluded. NOTE 1 As a refrigerating circuit is considered not to incorporate electrical and electronic systems, activities in this area are not part of this document. National regulations or appropriate International or national standards can be referred to for competence on electrical and electronic systems. NOTE 2 This document does not apply to persons carrying out work on self-contained refrigerating systems as defined in ISO 5149-1 or EN 378-1, from the initial design of the product to the complete manufacture of the product, provided the process is controlled and the methods used are checked by an organization or individual responsible for the conformance with statutory requirements on health, safety and environment (e.g. energy efficiency). NOTE 3 This document does not constitute a training programme.

Refrigerating systems and heat pumps — Competence of personnel

BS EN 16905-5:2022 燃气吸热发动机驱动的热泵 供暖和制冷模式下季节性性能的计算

1   Scope This part of EN 16905 specifies the calculation of the seasonal performance factor for gas-fired endothermic engine driven heat pumps for heating and/or cooling mode including the engine heat recovery, to be used outdoors. This document only applies to appliances with a maximum heat input (based on net calorific value) not exceeding 70 kW at standard rating conditions. This document only applies to appliances under categories I 2H , I 2E , I 2Er , I 2R , I 2E(S)B , I 2L , I 2LL , I 2ELL , I 2E(R)B , I 2ESi , I 2E(R) , I 3P , I 3B , I 3B/P , II 2H3+ , II 2Er3+ , II 2H3B/P , II 2L3B/P , II 2E3B/P , II 2ELL3B/P , II 2L3P , II 2H3P , II 2E3P and II 2Er3P according to EN 437:2021. This document only applies to appliances having: a) gas fired endothermic engines under the control of fully automatic control systems; b) closed system refrigerant circuits in which the refrigerant does not come into direct contact with the fluid to be cooled or heated; c) where the temperature of the heat transfer fluid of the heating system (heating water circuit) does not exceed 105 °C during normal operation;

Gas-fired endothermic engine driven heat pumps. Calculation of seasonal performances in heating and cooling mode

KS B ISO 13256-1-2022 水源热泵.性能试验和额定值.第1部分:水对空气和盐水对空气热泵

Water-source heat pumps — Testing and rating for performance — Part 1: Water-to-air and brine-to-air heat pumps

KS B ISO 13256-2:2022 水源热泵.性能试验和额定值.第2部分:水对水和盐水对水热泵

Water-source heat pumps — Testing and rating for performance — Part 2: Water-to-water and brine-to-water heat pumps