27.080 热泵 标准查询与下载

GOST R 58841.6-2021 净热输入不超过 70 千瓦的加热和/或冷却用燃气吸附器具 Part 6. 季节性表现的计算

Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW. Part 6. Calculation of seasonal performances

GOST R 59375.1-2021 烟囱 金属烟囱的要求 第1部分 烟囱的建筑构件

Chimneys. Requirements for metal chimneys. Part 1. Building components for chimneys

GOST R 59386.2-2021 热泵热水器 性能测试和评级 第2部分空间采暖用热泵热水器

Heat pump water heater. Testing and rating for performance. Part 2. Heat pump water heater for space heating

GOST R 59386.1-2021 热泵热水器 性能测试和评级 第1部分 供热水用热泵热水器

Heat pump water heater. Testing and rating for performance. Part 1. Heat pump water heater for hot water supply

T/GDC 73-2020 温室大棚恒温机组

一般规定、气密性试验和真空试验要求、运转、性能要求、设计和使用条件、噪声与振动、电器安全、外观质量、保用期

Greenhouse constant temperature unit

T/GDC 77-2020 空气源热泵无水地暖安装验收规范

总体要求、绝热层安装、无水地暖管路及元件的安装、填充层施工、面层施工、室内机安装、无水地暖主机安装、制冷剂的充注与回收、电气系统安装、调试与试运行、质量验收

Air source heat pump anhydrous floor heating installation acceptance specification

T/GDC 74-2020 采暖-热水一体热泵机组

空间采暖部分负荷条件、试验工况设计、季节性空间供热效率要求、季节空间供暖能源效率等级、噪音

Heating-hot water integrated heat pump unit

T/GDC 76-2020 空气源热泵热水机

一般要求、安全要求、性能要求

Air source heat pump water heater

DB11/T 1771-2020 地源热泵系统运行技术规范

Ground source heat pump system operation technical specification

DB11/T 1772-2020 地源热泵系统评价技术规范

Technical specification for ground source heat pump system evaluation

OENORM EN 378-3-2020 制冷系统和热泵 安全和环境要求 第3部分：安装地点和个人防护

Refrigerating systems and heat pumps - Safety and environmental requirements - Part 3: Installation site and personal protection

DS/EN 378-3:2020 制冷系统和热泵《安全和环境要求》第3部分：安装场所和个人防护

Refrigerating systems and heat pumps – Safety and environmental requirements – Part 3: Installation site and personal protection

OENORM EN 14825-2020 用于空间加热和冷却的带电动压缩机的空调、液体冷却机组和热泵 部分负荷条件下的测试和额定值以及季节性性能的计算

Air conditioners, liquid chilling packages and heat pumps, with electrically driven compressors, for space heating and cooling - Testing and rating at part load conditions and calculation of seasonal performance

EN 378-3:2016+A1:2020 制冷系统和热泵-安全和环境要求-第3部分:安装场地及个人防护 包含修改件A1,2020

This European Standard specifies the requirements for the safety of persons and property, provides guidance for the protection of the environment and establishes procedures for the operation, maintenance and repair of refrigerating systems and the recovery of refrigerants. The term “refrigerating system” used in this European Standard includes heat pumps. This Part 3 of the European Standard is applicable to the installation site (plant space and services). It specifies requirements on the site for safety, which may be needed because of, but not directly connected with, the refrigerating system and its ancillary components. This standard applies: a) to refrigerating systems, stationary or mobile, of all sizes except to vehicle air conditioning systems covered by a specific product standard e.g. ISO 13043; b) to secondary cooling or heating systems; c) to the location of the refrigerating systems; d) to replaced parts and added components after adoption of this standard if they are not identical in function and in the capacity. Systems using refrigerants other than those listed in of !EN 378 1:2016+A1:2020", Annex E are not covered by this standard. This standard does not apply to goods in storage. This standard is not applicable to refrigerating systems which were manufactured before the date of its publication as a European Standard except for extensions and modifications to the system which were implemented after publication. This standard is applicable to new refrigerating systems, extensions or modifications of already existing systems, and for existing stationary systems, being transferred to and operated on another site. This standard also applies in the case of the conversion of a system for another refrigerant type, in which case conformity with the relevant clauses of parts 1 to 4 of the standard shall be assessed.

Refrigerating systems and heat pumps - Safety and environmental requirements - Part 3: Installation site and personal protection

ISO 5151:2017/Amd 1:2020 非管道空调器和热泵.性能试验和额定值.修改件1

Non-ducted air conditioners and heat pumps — Testing and rating for performance — Amendment 1

ISO 15042:2017/Amd 1:2020 多联机系统空调器和空气对空气热泵.性能试验和额定值.修改件1

Multiple split-system air conditioners and air-to-air heat pumps — Testing and rating for performance — Amendment 1

T/CABEE 001-2020 地源热泵系统运行技术规程

《规程》结合我国已经实施的地源热泵设计、验收、评价等标准和地源热泵项目中新技术、新设备的应用成果而制定。 《规程》的制定规范了地源热泵系统的运行管理方法，指导了系统运行的技术要求，提升了我国地源热泵系统运行管理的整体技术水平，解决了我国地源热泵系统长期以来在运行过程中无据可依的状态，促进了地源热泵技术的合理应用和健康发展。为使用地源热泵系统的用户提供了技术依据。

Technical specification for operation of ground-source heat pump system

20/30421077 DC BS EN 16147 AMD1 带电动压缩机的热泵 生活热水机组的测试、性能评级和标记要求

BS EN 16147 AMD1. Heat pumps with electrically driven compressors. Testing, performance rating and requirements for marking of domestic hot water units

T/GDC 50-2021 空气源热泵无水地暖机组

一般规定、电镀件耐盐雾性、涂装件涂层附着力、气密性试验、真空试验和液压试验、性能要求、设计和使用条件、噪声与振动、电器安全

Air source heat pump waterless floor heating unit

EN 16905-2:2020 燃气吸热式发动机驱动的热泵 第2部分：安全

This part of prEN 16905 specifies the safety requirements, the safety test conditions and the safety test methods of gas-fired endothermic engine driven heat pumps for heating and/or cooling mode including the engine heat recovery, to be used outdoors. This document specifies minimum operating requirements which ensure that the products are fit for the use designated by the manufacturer when used for space heating and/or cooling. This document is to be used in conjunction with: a) the terms and conditions, EN 16905-1:2017; b) the test conditions, EN 16905-3:2017; c) the test methods, prEN 16905-4:2022; d) the calculation of seasonal performances in heating and cooling mode, FprEN 16905-5:2022; e) the heat pump, EN 14511-4:2022, EN 378-1:2016+A1:2020, EN 378-2:2016, EN 378 3:2016+A1:2020, EN 378-4:2016+A1:2019 and EN 14825:2018; f) electrical safety, EN 60335-1:2012, EN 60335-2-102:2016, EN 60335-2-40:2003 and EN 60204-1:2018. This document only applies to GEHP appliances with a maximum heat input (based on net calorific value) not exceeding 70 kW at standard rating conditions. This document only applies to GEHP appliances under categories I2H, I2E, I2Er, I2R, I2E(S)B, I2L, I2LL, I2ELL, I2E(R)B, I2ESi, I2E(R), I3P, I3B, I3B/P, II2H3+, II2Er3+, II2H3B/P, II2L3B/P, II2E3B/P, II2ELL3B/P, II2L3P, II2H3P, II2E3P and II2Er3P according to EN 437:2021. This document only applies to GEHP appliances: g) that have gas fired endothermic engines under the control of fully automatic control systems; h) that have closed system refrigerant circuits in which the refrigerant does not come into direct contact with the fluid to be cooled or heated; i) where the temperature of the heat transfer fluid of the heating system (heating water circuit) does not exceed 105 °C during normal operation; j) where the maximum operating pressure in the: 1) heating water circuit (if installed) does not exceed 6 bar; 2) domestic hot water circuit (if installed) does not exceed 10 bar. This document is applicable to GEHP appliances only when used for space heating or space cooling or for refrigeration, with or without heat recovery. This document is applicable to GEHP appliances that are intended to be type tested. Requirements for GEHP appliances that are not type tested would need to be subject to further consideration.

Gas-fired endothermic engine driven heat pumps - Part 2: Safety