27.080 热泵 标准查询与下载

KS B 8294-2016 水空地源多联热泵机组

Water-to-air ground source multi heat pump unit

DL/T 1645-2016 火力发电厂吸收式热泵工程验收规范

Code for acceptance of absorption heat pump projects in thermal power plants

NB/T 34034-2016 空气源热泵热水器搪瓷储热水箱

Air source heat pump water heater enamel hot water storage tank

EN 14825:2016 空间加热和冷却用带有电驱动压缩机的液体冷却封装和热泵空调.部分负载条件下的试验和评定和周期性能计算

Air conditioners, liquid chilling packages and heat pumps, with electrically driven compressors, for space heating and cooling - Testing and rating at part load conditions and calculation of seasonal performance

DB11/T 1254-2015 再生水热泵系统工程技术规范

Reclaimed water heat pump system engineering technical specification

DB11/T 1253-2015 地埋管地源热泵系统工程技术规范

Engineering technical specification for buried pipe ground source heat pump system

GSO ISO 16345:2015 水冷却塔 热性能测试和调节

  Scope is not provided for this standard

Water-cooling towers -- Testing and rating of thermal performance

DB11/T 1237-2015 污水源热泵系统设计规范

Design specification for sewage source heat pump system

GSO ISO 14903:2015 冷却系统和加热泵 调整组件和连接的密封性

The requirements contained in this International Standard are applicable to joints of maximum DN 50 and components of maximum 5 l and maximum mass of 50 kg. This International Standard is intended to describe the qualification procedure for type approval of the tightness of components, joints and parts used in refrigerating systems and heat pumps as described in ISO 5149. It characterizes the joint tightness and stresses met when operating, following the fitting procedure specified by the manufacturer, and specifies the minimal list of necessary information to be provided by the supplier of a component to the person in charge of carrying out this procedure. This International Standard specifies the level of tightness of the component, as a whole, and its assembly as specified by the manufacturer. This International Standard applies to the hermetically sealed and closed components, joints and parts used in refrigerating installations, including those with seals, whatever their material and their design are. This International Standard specifies additional requirements for mechanical joints that can be recognized as hermetically sealed joints.

Refrigerating systems and heat pumps -- Qualification of tightness of components and joints

KS B 8293-2015 水-空气地源热泵装置

Water-to-air and brine-to-air heat pumps unit

KS B 8294-2015 水-空气地源多热型热泵装置

Water-to-air ground source multi heat pump unit

KS B 8292-2015 水-水地源热泵装置

Water-to-water ground source heat pump unit

KS B 8292-2015(2020) 水 - 水地源热泵机组

Water-to-water ground source heat pump unit

EN 12309-3:2014 净热输入不超过 70 kW 的加热和/或冷却用燃气吸附器具 第3部分：测试条件

Scope of EN 12309 series Appliances covered by EN 12309 include one or a combination of the following: - gas-fired sorption chiller; - gas-fired sorption chiller/heater; - gas-fired sorption heat pump; EN 12309 applies to appliances only when used for space heating or cooling or refrigeration with or without heat recovery. Appliances can be monovalent, bivalent or hybrid types. EN 12309 applies to appliances having flue gas systems of type B and C (according to CEN/TR 1749) and to appliances designed for outdoor installations. EN 12309 applies to appliances that can be single ducted or double ducted. EN 12309 only applies to appliances having - integral burners under the control of fully automatic burner control systems, - closed system refrigerant circuits in which the refrigerant does not come into direct contact with the water or air to be cooled or heated, - mechanical means to assist transportation of the combustion air and/or the flue gas. The above appliances can have one or more primary or secondary functions (i.e. heat recovery - see definitions in prEN 12309 1:2012) and EN 12309 applies to all such functions providing that the function concerned is dependent on circulation of fluid (refrigerant and/or solution) within the absorption, adsorption or refrigerant circuit(s). NOTE 1 Any appliance function that is not dependent on circulation of the fluid within the absorption, adsorption, or refrigerant circuit(s) should be assessed separately. EN 12309 is applicable to appliances that are intended to be type tested. Requirements for appliances that are not type tested would need to be subject to further consideration. In the case of packaged units (consisting of several parts), EN 12309 applies only to those designed and supplied as a complete package. EN 12309 does not apply to air conditioners. The appliances having their condenser cooled by air and by the evaporation of external additional water are not covered by EN 12309. Installations used for heating and/or cooling of industrial processes are not within the scope of EN 12309. NOTE 2 All the symbols given in this text should be used regardless of the language used. Scope of this Part 3 to EN 12309 This part of EN 12309 specifies the test conditions for the rating of energy parameters of gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW.

Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW - Part 3: Test conditions

EN 12309-5:2014 净热输入不超过 70 kW 的加热和/或冷却用燃气吸附器具 第5部分：要求

1.1 Scope of EN 12309 Appliances covered by this standard include one or a combination of the following: - gas-fired sorption chiller; - gas-fired sorption chiller/heater; - gas-fired sorption heat pump. This European Standard applies to appliances designed to be used for space heating or cooling or refrigeration with or without heat recovery. This European Standard applies to appliances having flue gas systems of type B and type C (according to CEN/TR 1749) and to appliances designed for outdoor installations. EN 12309 does not apply to air conditioners, it only applies to appliances having: - integral burners under the control of fully automatic burner control systems, - closed system refrigerant circuits in which the refrigerant does not come into direct contact with the water or air to be cooled or heated, - mechanical means to assist transportation of the combustion air and/or the flue gas. The above appliances can have one or more primary or secondary functions (i.e. heat recovery - see definitions in prEN 12309 1:2012). In the case of packaged units (consisting of several parts), this European Standard applies only to those designed and supplied as a complete package. The appliances having their condenser cooled by air and by the evaporation of external additional water are not covered by EN 12309. Installations used for heating and/or cooling of industrial processes are not within the scope of EN 12309. All the symbols given in this text should be used regardless of the language used. 1.2 Scope of this Part 5 of EN 12309 This part of EN 12309 specifies the requirements for gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW. This part of EN 12309 deals particularly with the requirements relating to the declaration of capacity and energy efficiency performance.

Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW - Part 5: Requirements

EN 12309-6:2014 净热输入不超过 70 kW 的加热和/或冷却用燃气吸附器具 第6部分：季节性性能的计算

1.1 Scope of EN 12309 Appliances covered by this standard include one or a combination of the following: - gas-fired sorption chiller; - gas-fired sorption chiller/heater; - gas-fired sorption heat pump. This European Standard applies to appliances designed to be used for space heating or cooling or refrigeration with or without heat recovery. This European Standard applies to appliances having flue gas systems of type B and type C (according to CEN/TR 1749) and to appliances designed for outdoor installations. EN 12309 does not apply to air conditioners, it only applies to appliances having: - integral burners under the control of fully automatic burner control systems, - closed system refrigerant circuits in which the refrigerant does not come into direct contact with the water or air to be cooled or heated, - mechanical means to assist transportation of the combustion air and/or the flue gas. The above appliances can have one or more primary or secondary functions (i.e. heat recovery - see definitions in EN 12309 1:2014). In the case of packaged units (consisting of several parts), this European Standard applies only to those designed and supplied as a complete package. The appliances having their condenser cooled by air and by the evaporation of external additional water are not covered by EN 12309. Installations used for heating and/or cooling of industrial processes are not within the scope of EN 12309. All the symbols given in this text should be used regardless of the language used. 1.2 Scope of this Part 6 to EN 12309 This part of EN 12309 specifies the calculation methods of seasonal performances for gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW. It deals in particular with the calculation methods of reference seasonal performances in cooling and heating mode for monovalent and bivalent appliances. NOTE This European Standard serves as an input for the calculation of the system energy efficiency in heating mode of specific heat pump systems in buildings, as stipulated in EN 15316-4-2.

Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW - Part 6: Calculation of seasonal performances

KS B ISO 13256-2:2014 水源热泵.性能试验和额定功率.第2部分:水.水和盐水.水热泵

Water-source heat pumps — Testing and rating for performance — Part 2: Water-to-water and brine-to-water heat pumps

KS B ISO 13256-2-2014(2019) 水源热泵 - 性能测试和等级 - 第2部分:水与水和盐水对水热泵

Water-source heat pumps — Testing and rating for performance — Part 2: Water-to-water and brine-to-water heat pumps

DB45/T 1062-2014 海水池塘养殖清洁生产要求

Cleaner Production Requirements for Seawater Pond Culture

BS ISO 16345:2014 水冷却塔. 热性能测试和评价

Water-cooling towers. Testing and rating of thermal performance