共找到 178 条与 核能工程 相关的标准,共 12 页
本标准规定了压水堆燃料棒(以下称燃料棒)焊缝的金相检验和X射线照相检验方法。 本标准的金相检验方法适用于采用电子束或钨极惰性气体保护进行焊接的锆合金燃料棒环焊缝和密封焊点熔深及缺陷的检验,也适用于焊缝的微观组织检查。其中的薄膜法仅适用于采用电子束焊接的Zr-Sn合金燃料棒焊缝。燃料组件中锆合金导向管焊缝熔深和缺陷以及采用其他焊接方式得到的焊缝的金相检验也可参照执行。 本标准的X射线照相检验方法适用于燃料棒环焊缝及密封焊点的检查。压水堆控制棒、可燃毒物棒、中子源棒及导向管部件焊缝也可参照执行。
Test method of weld of fuel rod for PWR.Metallographic examination and radiographic testing
本标准规定了核辐射探测器用直流高压稳压电源的产品分类、要求、试验方法、检验规则以及标志、包装、运输和贮存。 本标准适用于由交流或直流供电的室内核辐射探测器用直流高压稳压电源(以下简称电源)。有关核仪器用直流稳压电源的特定测试方法见附录A。
Stabilized DC power supply for nuclear radiation detectors
本标准规定了与盖革-米勒计数管有关的术语和定义、测试条件和测试方法。 本标准适用于盖革-米勒(或GM)计数管参数和特性的测试。
Methods of test of Geiger-müller counter tubes
本标准规定了液体闪烁计数用瓶子、用于放射性测量的试管(包括管塞)和核电子仪器用样品盘的尺寸。 本标准适用于液体闪烁计数用瓶子、用于放射性测量的试管(包括管塞)和核电子仪器用样品盘的尺寸的设计检验与制造及质量控制。
Dimension of sample planchets、vials and test tubes for radioactivity measurement
本标准规定了微型中子源反应堆核燃料棒(简称“微堆燃料棒”)的技术要求、材料、试验方法、检验规则及包装、贮存、运输等要求。 本标准适用于微堆燃料棒的制造和验收。
Specification for nuclear fuel rods of miniature neutron source reactor
本部分规定了冷停堆期间堆芯充分冷却监测仪表的要求。 本部分适用于设计或改造配置类似于图1和图2所示的压水堆(以下简称PWR)时堆芯冷却监测仪表的设计。
Measurements for monitoring adequate cooling within the core of pressurized light water reactors - Part 2: Instrumentation requirements during cold shutdown
本规范适用于新建、扩建核电厂的总图运输设计。其它核供热的核能厂亦可按本规范执行。
Design code for general plan and transportation of nuclear power plants
本标准规定了核燃料与核燃料循环领域有关的术语及其定义。 本标准适用于核燃料与核燃料循环领域内编写标准和技术文件、翻译文献及国内国际技术交流等。
Glossary of terms: nuclear science and technology. Nuclear fuel and nuclear fuel cycle
本标准规定了裂变反应堆领域有关的术语及其定义。 本标准适用于裂变反应堆领域内编制标准,编写标准和技术文件,翻译文献及国内国际技术交流等。
Glossary of terms: nuclear science and technology--Fission reactor
本标准规定了核物理与核化学领域基础术语及其定义。 本标准适用于核物理与核化学领域内编写标准和技术文件、翻译文献及国内、国际技术交流等。
Glosary of terms: nuclear science and technology. Nuclear physics and nuclear chemistry
本标准规定了电离辐射防护与辐射源安全领域中常用的基本术语及其定义。 本标准适用于涉及电离辐射与辐射源安全的一切领域。
Clossary of terms: Nuclear science and technology. Radiation protection and safety of radiation sources
本标准规定了放射性核素领域有关的术语及定义。 本标准适用于放射性核素领域内编写标准和技术文件、翻译文献及国内国际交流等。
Glossary of terms: nuclear science and technology radionuclide
本标准规定了核电厂仪表和控制系统以及它们的供电设备的核安全级别、分级的方法和要求。 本标准适用于核电厂仪表和控制系统以及它们的供电设备(以下简称仪表及其供电设备)。
Safety classification of instrumentation and control systems and their electrical equipment of nuclear power plants
本标准规定了铀加工及核燃料制造设施流出物的放射性活度监测计划、采样和测量技术、质量保证以及测量结果的记录和报告的要求。 本标准适用于铀加工及核燃料制造设施流出物中放射性活度的监测。 本标准不适用于含钚核燃料制造设施流出物中放射性活度的监测。
Regulations for monitoring radioactivity in effluents from Uranium processing and nuclear fuel fabrication facilities
本标准规定了电离辐射探测器用的主放大器(成形放大器)和电荷灵敏前置放大器的测试方法。 本标准适用于半导体探测器、气体脉冲电离室、正比探测器用的主放大器和电荷灵敏前置放大器,也适用于闪烁探测器用的主放大器。
Test procedures for amplifiers and charge-sensitive preamplifiers used with detectors of ionizing radiation
Crteria for accident monitoring instrumentations in nuclear power generating stations Criteria for instrumentations
Functional criteria for nuclear power plant accident monitoring instrumentation criteria
本标准规定了在建筑物内使用的入侵报警系统中微波和被动红外复合探测器的技术要求和试验方法,是设计、制造和检验的基本依据。 微波和被动红外复合探测器除应符合本标准的规定外,还应符合GB10408.1、GB10408.3、GB10408.5的有关规定。
Combination microwave and passive infrared intrusion detector
本标准规定了用于组装防护X、γ辐射的屏蔽墙的各种铅构件的代号、规格和性能要求。 本标准适用于需要防护X、γ辐射的场合。
Lead shielding units for 50 and 100mm thick walls used for protection against ionizing radiation
本标准规定了高、低压直流稳压电源的测试方法。 本标准适用于核仪器用高、低压直流稳压电源。
Test procedures for stabilized d.c high/low voltage power for nuclear instruments
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号