共找到 649 条与 电线和电缆 相关的标准,共 44 页
JB/T 4279的本部分规定了漆包圆线单向刮漆试验仪的检定项目与技术要求、检定用器具、检定方法和检定结果的处理。 本部分适用于漆包圆线单向刮漆试验仪的检定。
Verification procedure for test equipment of enamelled winding wire.Part 9:Unidirectional scraping tester
Preface This is the harmonized ANCE, CSA, and UL Standard for Thermoplastic-Insulated Wires and Cables. It is the fourth edition of NMX-J-010-ANCE, the ninth edition of CSA-C22.2 No. 75, and the fourteenth edition of UL 83. This edition of CSA-C22.2 No. 75 supersedes the previous edition published in 2003. This edition of UL 83 supersedes the previous edition published in 2003. 1 Scope 1.1 This Standard specifies the requirements for 600 V, single-conductor, thermoplastic-insulated wires and cables, for use as follows: a) In Canada, in accordance with CSA C22.1, Canadian Electrical Code (CEC), Part I; b) In Mexico, in accordance with NOM-001-SEDE, Standard for Electrical Installations; and c) In the United States, in accordance with ANSI/NFPA 70, National Electrical Code (NEC). Note: See Annex A for the complete list of wire types covered by this Standard and the specific electrical codes for which they are intended. 1.2 This Standard also specifies the requirements for submersible-pump cables, with or without jackets (see Clause 7). No type-letter designations are assigned to these cables. 1.3 In Mexico, the requirements for multiple-conductor thermoplastic-insulated and -jacketed cables rated 600 V are specified in Annex B. In Canada and the United States, requirements for multiple-conductor thermoplastic-insulated and -jacketed cables rated 600 V are covered in other standards. 1.4 Products for which this Standard provides requirements may have applications not described in the electrical codes listed in Clause 1.1.
Thermoplastic-Insulated Wires and Cables
JB/T 4279的本部分规定了漆包线电热强制通风试验箱的检定项目与技术要求、检定用器具、检定方法和检定结果的处理。 本部分适用于漆包线电热强制通风试验箱的检定。
Verification procedure for test equipment of enamelled winding wire.Part 7:Forced circulating-air oven
JB/T 4279的本部分规定了漆包圆线剥离试验仪的检定项目与技术要求、检定用器具、检定方法和检定结果的处理。 本部分适用于漆包圆线剥离试验仪的检定。
Verification procedure for test equipment of enamelled winding wire.Part 6:Peeling tester
JB/T 4279的本部分规定了漆包圆线急拉断试验仪的检定项目与技术要求、检定用器具、检定方法和检定结果的处理。 本部分适用于漆包圆线急拉断试验仪的检定。
Verification procedure for test equipment of enamelled winding wire.Part 5:Jerk tester
JB/T 4279的本部分规定了漆包圆线回弹角试验仪的检定项目与技术要求、检定用器具、检定方法和检定结果的处理。 本部分适用于测定导体标称直径O.08mm~1.60mm漆包圆线的回弹角试验仪的检定。
Verification procedure for test equipment of enamelled winding wire.Part 4:Springness tester
JB/T 4279的本部分规定了漆包线伸长试验仪的检定项目与技术要求、检定用器具、检定方法和检定结果的处理。 本部分适用于漆包线伸长试验仪的检定。
Verification procedure for test equipment of enamelled winding wire.Part 3:Elongation tester
JB/T 4279的本部分规定了直流电阻试验装置的检定项目与技术要求、检定用器具、检定方法和检定结果的处理。 本部分适用于实验室直流电阻试验装置的测量精度的检定。
Verification procedure for test equipment of enamelled winding wire.Part 2:DC electrical resistance tester
JB/T 4279的本部分规定了漆包绕组线试验仪器设备检定方法的术语和定义、测量结果的数字修约、检定器具的校验和检定、物理量的测量方法及检定证书和检定结果通知书的封面式样。 本部分适用于漆包绕组线试验仪器设备的检定。
Verification procedure for test equipment of enamelled winding wire.Part 1:General
JB/T 4279的本部分规定了漆包圆线焊锡试验仪的检定项目与技术要求、检定用器具、检定方法和检定结果的处理。 本部分适用于漆包圆线焊锡试验仪的检定。
Verificafion procedure for test equipment of enamelled winding wire.Part 14: Solderability tester
JB/T 4279的本部分规定了漆包圆线动摩擦系数试验仪的检定项目与技术要求、检定用器具、检定方法和检定结果的处理。 本部分适用于漆包圆线动摩擦系数试验仪的检定。
Verificafion procedure for test equipment of enamelled winding wire.Part 17: Dynamic friction coefficient tester
JB/T 4279的本部分规定了漆包圆线静摩擦系数试验仪的检定项目与技术要求、检定用器具、检定方法和检定结果的处理。 本部分适用于漆包圆线静摩擦系数试验仪的检定。
Verificafion procedure for test equipment of enamelled winding wire.Part 16: Static friction coefficient tester
JB/T 4279的本部分规定了漆包线耐溶剂试验仪的检定项目与技术要求、检定用器具、检定方法和检定结果的处理。 本部分适用于漆包线耐溶剂试验仪的检定。
Verification procedure for test equipment of enamelled winding wire.Part 10:Tester for resistance to solvents
JB/T 4279的本部分规定了漆包圆线耐冷冻剂试验装置的检定项目与技术要求、检定用器具、检定方法和检定结果的处理。 本部分适用于漆包圆线耐冷冻剂试验装置的检定。
Verificafion procedure for test equipment of enamelled winding wire.Part 18: Resistance to refrigerants tester
JB/T 4279的本部分规定了漆包圆线低压漆膜连续性试验仪的检定项目与技术要求、检定用器具、检定方法和检定结果的处理。 本部分适用于漆包圆线低压漆膜连续性试验仪的检定。
Verification procedure for test equipment of enamelled winding wire.Part 12:Continuity of insulation tester(low voltage method)
JB/T 4279的本部分规定了漆包圆线高压漆膜连续性试验仪的检定项目与技术要求、检定用器具、检定方法和检定结果的处理。 本部分适用于漆包圆线高压漆膜连续性试验仪的检定。
Verification procedure for test equipment of enamelled winding wire.Part 13:Continuity of insulation tester(high-voltage method)
JB/T 4279的本部分规定了漆包线往复刮漆试验仪的检定项目与技术要求、检定用器具、检定方法和检定结果的处理。 本部分适用于漆包线往复刮漆试验仪的检定。
Verificafion procedure for test equipment of enamelled winding wire.Part 15: To-and-fro scraping tester
Specifies methods for determining the elongation at break of wire, and the tensile strength and breaking force of high-tensile strength conductors, and for carrying out the lapping test and the twisting test on hard-drawn and high-tensile conductors.
Test methods for bare conductors and conductors of insulated electric cables Part 3: Mechanical tests
This drawing covers the performance characteristics for 30, 28, 26 AWG light weight composite wire using a PTFE/polyimide tape wrap insulation system. The polyimide tape should be hydrolysis resistant.
WIRE, ELECTRICAL, COMPOSITE, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, 30, 28, 26 AWG, 600 VOLT
Aerospace series Cables, electrical, aircraft use Test methods Part 810: Structural return loss Edition P 1
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号