29.130.20 低压开关装置和控制器 标准查询与下载

T/CEEIA 302-2018 旁路转换开关电器及成套设备

本标准规定了旁路转换开关电器及成套设备的定义、使用条件、结构要求、技术特性和验证要求。 本标准适用于额定电压交流不超过1000 V，直流不超过1500 V的旁路转换开关电器及成套设备。 旁路转换开关电器成套设备系指固定、柜式结构。 旁路转换开关电器（BTSE）用于电源之间的转换。它包含着主电路的自动转换开关电器(ATSE)和旁路的开关电器及其它必要装置，当自动转换开关电器(ATSE)退出主电路后，旁路开关电器应能保证对负载的供电。 本标准适用于那些一次性设计、制造和验证或完全标准化批量制造的旁路转换开关电器及成套设备。成套设备进行生产和/或组装的可以不是初始制造商（参见3.1.8）。 本标准仅适用于由PC级转换开关电器组成的旁路转换开关电器。 本标准适用于户内环境使用。

Bypass transfer switching equipment and ASSEMBLY

CAN/CSA-C22.2 No.60947-7-4-2018 低压开关设备和控制设备 第7-4部分：辅助设备 铜导体 PCB 接线端子

1.1 Scope This part of IEC 60947 specifies requirements for PCB terminal blocks primarily intended for industrial or similar use. Mounting and fixing on the printed circuit board is made by soldering, press-in or equivalent methods to provide electrical and mechanical connection between copper conductors and the printed circuit board. This standard applies to PCB terminal blocks intended to connect copper conductors, with or without special preparation, having a cross-section between 0,05 mm2 and 300 mm2 (AWG 30/600 kcmil), intended to be used in circuits of a rated voltage not exceeding 1 000 V a.c. up to 1 000 Hz or 1 500 V d.c. NOTE 1 Large cross section terminal blocks are dedicated to specific design of high current PCBs. The range up to 300 mm2 is kept to cover any possible application. Examples of high current PCBs and PCB terminal blocks are shown in Annex C. NOTE 2 AWG is the abbreviation of “American Wire Gage” (Gage (US) = Gauge (UK)); kcmil = 1 000 cmil; 1 cmil = 1 circular mil = surface of a circle having a diameter of 1 mil; 1 mil = 1/1 000 inch. This standard may be used as a guide for special types of PCB terminal blocks with components, such as disconnect units, integrated cartridge fuse-links and the like. If applicable, in this standard the term “clamping unit” is used instead of “terminal”. This is taken into account in case of references to IEC 60947-1. 1.1DV D2 Modification by adding the following: 1.1DV.1 This standard also applies to terminal blocks that have insulation piercing or displacement clamping units. 1.1DV.2 The wire range for terminal blocks covered by this standard include 0,051 mm2 to 300 mm2 (30 AWG to 600 kcmil) copper conductors and 3,31 mm2 to 300 mm2 (12 AWG to 600 kcmil) aluminum conductors. See Annex DVA for aluminum requirements. In Mexico, 3,31 mm2 (12 AWG), 5,26 mm2 (10 AWG), and 8,37 mm2 (8 AWG) aluminum conductors are not allowed. 1.1DV.3 The voltage range includes up to 1500 Vac and 1500 Vdc.

Low-voltage switchgear and controlgear — Part 7-4: Ancillary equipment — PCB terminal blocks for copper conductors

T/SDLEA 001-2018 智能配电箱

总控（第1代）产品系列：对“过压、欠压、漏电”进行总体实时“智能显示、监控和保护”。 分控（第2代）产品系列：对“过压、欠压、漏电、短路、过载”进行分开各路实时“智能显示、监控和保护”。

Intelligent distribution box

DIN EN 60947-5-1:2018 低压开关设备和控制设备.第5-1部分:控制电路设备和开关元件(IEC 60947-5-1-2016+COR1-2016);德文版本EN 60947-5-1-2017

This draft applies to control circuit devices and switching elements intended for controlling, signalling, interlocking, etc., of switchgear and controlgear. It applies to control circuit devices having a rated voltage not exceeding 1000 V a.c. (at a frequency not exceeding 1000 Hz) or 600 V d.c.

Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices (IEC 60947-5-1:2016 + COR1:2016); German version EN 60947-5-1:2017

IEC 60947:2024 SER 低压开关设备和控制设备-所有零件

Low-voltage switchgear and controlgear - ALL PARTS

CAN/CSA C22.2 No.31-2018 开关设备组件

1.1 This Standard applies to deadfront indoor enclosed and outdoor enclosed assemblies of switchgear devices such as a) switches; b) interrupting devices; c) air circuit breakers; d) power circuit breakers; and e) control, metering, protective, and regulating equipment with associated interconnections and supporting structures. 1.2 This Standard covers equipment with a nominal voltage of 46 kV or less that is intended to be used a) in accordance with the Canadian Electrical Code, Part I; b) in non-hazardous locations; c) for controlling and protecting the power from generators or other sources; and d) for supplying electrical energy to power and lighting circuits. 1.3 This Standard does not apply to panelboards, industrial control equipment, switchboards for communication circuits , or low-voltage assemblies consisting of separately supported enclosed switches, enclosed circuit breakers, and possibly service meters, with interconnection between them enclosed in raceways. Note: Manufacturers and installers of switchgear assemblies approved under this Standard should take due note of the Canadian Electrical Code, Part I, with respect to the location of switchgear devices in areas where certain components might not be acceptable. 1.4 Clauses 2 to 6 apply to all switchgear assemblies and are supplemented and amended by a) Clause 7 for low-voltage switchgear assemblies; and b) Clause 8 for high-voltage switchgear assemblies. 1.5 In this Standard, “shall” is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; “should” is used to express a recommendation or that which is advised but not required; and “may” is used to express an option or that which is permissible within the limits of the standard. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (nonmandatory) to define their application.

Switchgear assemblies

KS C IEC 60947-1-2017 低压开关柜和控制装置第1部分:总则

Low-voltage switchgear and controlgear — Part 1: General rules

KS C IEC 60947-1:2017 低压开关设备和控制设备 第1部分：总则

Low-voltage switchgear and controlgear — Part 1: General rules

KS C IEC 60947-1-2017(2022) 低压开关设备和控制设备.第1部分:总则

Low-voltage switchgear and controlgear — Part 1: General rules

EN 60715:2017 低压开关设备和控制设备的尺寸.开关设备和控制设备中电气器件的机械支承用轨道上的标准化安装

Dimensions of low-voltage switchgear and controlgear - Standardized mounting on rails for mechanical support of switchgear@ controlgear and accessories

EN 62683-1:2017 低压开关设备和控制设备 用于信息交换的产品数据和特性 第1部分：目录数据

IEC 62683-1:2017 establishes the reference dictionary of the general description of low-voltage switchgear and controlgear classes based on defined properties. This dictionary is used to facilitate the exchange in electronic format of data describing low-voltage switchgear and controlgear. This document provides clear and unambiguous definitions of a limited number of properties and classes which are mainly used for presentation, selection and identification of products particularly in electronic catalogues. Each property has an unambiguously defined meaning and naming, and, where relevant, a defined value list, a defined format and a defined unit. The intention is not to cover manufacturer-specific features.

Low-voltage switchgear and controlgear - Product data and properties for information exchange - Part 1: Catalogue data

EN 60947-2:2017 低压开关和控制设备.第2部分:断路器

Low-voltage switchgear and controlgear - Part 2: Circuit-breakers

T/ZZB 0203-2017 家用和类似用途固定式电气装置的跷板开关

本标准规定了家用和类似用途固定式电气装置的跷板开关的术语和定义、分类、基本要求、技术要求、检验规则、标志、包装、运输和贮存要求及质量服务承诺。 本标准适用于户内或户外使用的，仅用于交流电、额定电压不超过250 V，额定电流不超过16 A的家用和类似用途固定式手动操作的按GB/T 16915.1-2014的7.1.5分类的跷板开关。 本标准涵盖的开关是指预期用以控制正常使用的：  ——钨丝灯负载电路；或  ——荧光灯负载（包括电子镇流器）电路；或 ——功率因数不低于 0.95 的实质上电阻式负载电

Rocker switches for household and similar fixed-electrical installations

IEC TR 63054:2017 低压开关设备和控制设备.火灾风险分析和风险降低措施

Low-voltage switchgear and controlgear - Fire risk analysis and risk reduction measures

IEC 60715:2017 低压开关设备和控制设备尺寸.开关设备、控制设备及配件在机械支承导轨上的标准化安装

This document specifies dimensional and functional requirements for the compatible mounting of switchgear, controlgear and accessories on some types of rails. The object of this document is to specify those dimensions that are critical for the correct design of mounting rails and equipment. The following sections are covered by this document: "top hat" section; "C" section; "G" section. NOTE 1 Mounting compatibility does not imply functional interchangeability. Annexes deal with specific steel mounting rails satisfying the requirements of this document, and give additional dimensional data and loading requirements applicable to such rails. NOTE 2 The detailed design and material of specific steel rails is given in the annexes. NOTE 3 Other shapes of rails complying with this document not listed in Annex A can be used. Mounting rails used as a protective conductor using a conducting connection to a protective conductor terminal block are specified in IEC 60947-7-2. In other applications where the mounting rail is used as earthing conductor, the relevant product standard applies. This document has the status of a horizontal standard in accordance with IEC Guide 108:2006. This horizontal standard is primarily intended for use by technical committees in the preparation of standards in accordance with the principles laid down in IEC Guide 108. One of the responsibilities of a technical committee is, wherever applicable, to make use of horizontal standards in the preparation of its publications. The contents of this horizontal standard will not apply unless specifically referred to or included in the relevant publications.

Dimensions of low-voltage switchgear and controlgear - Standardized mounting on rails for mechanical support of switchgear, controlgear and accessories

IEC 62683-1:2017 低压开关设备和控制设备 用于信息交换的产品数据和特性 第1部分：目录数据

This document establishes the reference dictionary of the general description of low-voltage switchgear and controlgear classes based on defined properties. This dictionary is used to facilitate the exchange in electronic format of data describing low- voltage switchgear and controlgear. This document provides clear and unambiguous definitions of a limited number of properties and classes which are mainly used for presentation, selection and identification of products particularly in electronic catalogues. Each property has an unambiguously defined meaning and naming, and, where relevant, a defined value list, a defined format and a defined unit. The intention is not to cover manufacturer-specific features.

Low-voltage switchgear and controlgear - Product data and properties for information exchange - Part 1: Catalogue data

DIN EN 62683:2017 低压开关设备和控制设备.信息交换用产品数据和性能(IEC 62683-2015);德文版本EN 62683-2015

Low-voltage switchgear and controlgear - Product data and properties for information exchange (IEC 62683:2015); German version EN 62683:2015

T/ZZB 0177-2017 交流接触器

本标准规定了交流接触器（以下简称接触器）的术语和定义，基本要求，产品分类，特性，产品资料，正常的使用和运输条件，技术要求，试验，质量承诺等内容。 本标准适用于频率50Hz或者60Hz，额定工作电压不超过交流1140V的接触器。

AC contactors

DIN EN 60947-3:2017 低压开关设备和控制设备.第3部分:开关,切断器,开关切断器及熔断器组合装置 (IEC 60947-3-2008+A1-2012+A2-2015);德文版本EN 60947-3-2009+A1-2012+A2-2015

Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units (IEC 60947-3:2008 + A1:2012 + A2:2015); German version EN 60947-3:2009 + A1:2012 + A2:2015

CAN/CSA-C22.2 No.60947-7-1-2017 低压开关设备和控制设备 第7-1部分：辅助设备 铜导体接线端子

This part of IEC 60947 specifies requirements for terminal blocks with screw-type or screw-less-type clamping units primarily intended for industrial or similar use and to be fixed to a support to provide electrical and mechanical connection between copper conductors. It applies to terminal blocks intended to connect round copper conductors, with or without special preparation, having a cross-section between 0,2 mm2 and 300 mm2 (AWG 24/600 kcmil), intended to be used in circuits of a rated voltage not exceeding 1 000 V a.c. up to 1 000 Hz or 1 500 V d.c. NOTE AWG is the abbreviation of “American Wire Gage” (Gage (US) = Gauge (UK)) kcmil = 1000 cmil; 1 cmil = 1 circular mil = surface of a circle having a diameter of 1 mil 1 mil = 1/1000 inch This standard may be used as a guide for – terminal blocks requiring the fixing of special devices to the conductors, for example quick connect terminations or wrapped connections, etc.; – terminal blocks providing direct contact to the conductors by means of edges or points penetrating the insulation, for example insulation displacement connections, etc.; – special types of terminal blocks, for example disconnect terminal blocks, etc. Where applicable in this standard, the term “clamping unit” has been used instead of the term “terminal”. This is taken into account in case of reference to IEC 60947-1. 1.1DV D2 Modification to add the following: 1.1DV.1 This standard specifies requirements for terminal blocks with screw-type or screw-less-type clamping units primarily intended for industrial or similar use and to be fixed to a support, in accordance with Annex DVB, National Electrical Code, NFPA 70 (for use in the USA), or CSA C22.1–15 Canadian Electrical Code, Part I (for use in Canada), and NOM-001-SEDE, Electrical Installations (Utility) ([for use in Mexico]). 1.1DV.2 The wire range for terminal blocks covered by this standard include 0,051 mm2 to 1 010 mm2 (30 AWG to 2 000 kcmil) copper conductors and 3,31 mm2 to 1 010 mm2 (12 AWG to 2 000 kcmil) aluminum conductors. See Annex DVA for aluminum requirements. In Mexico, 3,31 mm2 (12 AWG), 5,26 mm2 (10 AWG), and 8,37 mm2 (8 AWG) aluminum conductors are not allowed. 1.1DV.3 The voltage range includes up to 1 500 Vac and 1 500 Vdc. 1.2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60695-2-2:1991, Fire hazard testing – Part 2: Test methods – Section 2: Needle-flame test Amendment 1 (1994) IEC 60947-1:1999, Low-voltage switchgear and controlgear - Part 1: General rules Amendment 1 (2000) Amendment 2 (2001) ISO 4046:1978, Paper, board, pulp and related terms – Vocabulary 1.2DV D1 Modification to add the following: See Annex DVB for Canada, Mexico, and USA Standard References.

Low-voltage switchgear and controlgear — Part 7-1: Ancillary equipment — Terminal blocks for copper conductors