29.140 电灯及有关装置 标准查询与下载

DB44/T 1628-2015 LED灯带

本标准规定了额定电源电压250V 以下直流或交流50Hz供电的LED 灯带的术语和定义、产品分类、一般要求、特殊技术要求、试验方法、检验规则、包装、运输和贮存。 本标准适用于以柔性电路板（Flexible PCB）为机械与电气连接的基材,以贴片式LED做光源的柔性灯带及相关附件。 本标准不适用以硬质电路板为支撑基材的灯管或灯具和以软线或硬股电线做串并联的灯串。 用于室内暗槽、橱柜、展览局部照明或装饰照明，建筑轮廓、广告招牌等室外建筑照明、广告照明或装饰照明场所的LED柔性灯带适用于本标准。

LED strip

DB44/T 1621-2015 非自镇流LED管形灯

本标准规定了室内一般照明用非自镇流LED管形灯的术语和定义、分类、尺寸规格、一般要求、试验方法、检验规则、标志、产品使用说明书、包装、运输和贮存的要求。 适用范围如下： ——额定功率不大于60 W，额定电流不大于5 A； ——仅由安全特低电压（SELV）电源供电，且额定电压小于或等于60 V直流值； ——灯头符合表1要求。 注：在本标准中出现的“灯”代表“非自镇流LED管形灯”，除非有特别指明是其他类型的灯。

Non-self-ballasted LED tube lamps

IEC 62471-5:2015 灯和灯系统的光生物安全性 - 第5部分:影像投影机

This part of IEC 62471 provides requirements regarding photobiological safety of the optical radiation emitted by image projectors. This part of IEC 62471 does not deal with other hazards such as electrical@ mechanical or fire hazards. This part of IEC 62471 provides requirements regarding: ? optical radiation safety assessment of image projectors; ? projector risk groups; ? testing conditions and measurement conditions; ? manufacturer's requirements including user information. The scope of this part of IEC 62471 is photobiological safety of image projectors including the emissions from laser-illuminated projectors that fulfill the requirements as specified in IEC 60825-1:2014@ 4.4 and for which visible light emission has been excluded from classification in IEC 60825-1. This part of IEC 62471 does not address safety requirements for laser display products where collimated laser beams ?? generally scanned ?? are employed. It does address those laserilluminated projectors that employ a laser source to illuminate@ for example@ a micro-electromechanical system (MEMS) without scanned beams or crystal-based display projector system. NOTE Image projectors containing lasers are subject to those provisions of IEC 60825-1 applicable to the embedded laser. See IEC 60825-1:2014@ 4.4 for which visible light emission has been excluded from the laser product classification. This part of IEC 62471 includes projectors for only visible image projection and does not include ultraviolet (UV) projectors@ infrared (IR) projectors@ general lighting service (GLS) lamps (GLS; defined in IEC 62471) or projector lamp systems used for general lighting@ which are treated in separate International Standards.

Photobiological safety of lamps and lamp systems - Part 5: Image projectors

CSA C22.2 No.184-2015(R2019) 固态照明控制

1.1 This Standard applies to solid-state lighting controls rated at 600 V and less, with or without an integral switching (disconnecting) device, designed to be used in circuits a) for the control of incandescent lamps; and b) for the control of fluorescent, HID, ballasted, and similar lamps intended for installation in accordance with the Rules of the Canadian Electrical Code, Part I. 1.2 This Standard applies to controls intended for a) lighting controls without integral switching (disconnecting control); b) devices used as a table-mounted unit to which portable luminaires can be temporarily connected; c) devices permanently installed in the supply line of a lamp; d) direct plug-in devices; and e) other similar applications. Note: Refer to CSA C22.2 No. 184.1 for flush-mounted dimmers and similar devices. 1.3 This Standard does not apply to variable resistor and variable transformer-type controls. 1.4 Control devices containing phase cut dimmers may be optionally tested and marked in accordance with standard NEMA SSL 7A. 1.5 In this Standard, “shall” is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; “should” is used to express a recommendation or that which is advised but not required; and “may” is used to express an option or that which is permissible within the limits of the standard. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (nonmandatory) to define their application. 1.6 The values given in SI units are the units of record for the purposes of this Standard. The values given in parentheses are for information and comparison only.

Solid-state lighting controls

EN 62386-102:2014 数字可寻址照明接口.第102部分:控制装置的一般要求

IEC 62386-102:2014 is applicable to control gear in a bus system for control by digital signals of electronic lighting equipment. This electronic lighting equipment should be in line with the requirments of IEC 61347, with the addition of d.c. supplies. This second edition cancels and replaces the first edition published in 2009. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) elimination of all non-control gear relevant definitions, b) improvement of the requirements for control gear by clarifying the description, c) improvement of the test command iterations to increase the compatibility, d) addition of new commands, and e) the deletion of the requirements for: 1) timing; 2) control devices. The requirements for timing are now in Part 101 and the requirments for control devices are in Part 103.

Digital addressable lighting interface - Part 102: General requirements - Control gear

EN 62386-103:2014 数字可寻址照明接口 第103部分：一般要求 控制设备

IEC 62386-103:2014 is applicable to control devices in a bus system for control by digital signals of electronic lighting equipment. This electronic lighting equipment should be in line with the requirments of IEC 61347, with the addition of d.c. supplies.

Digital addressable lighting interface - Part 103: General requirements - Control devices

EN 62386-101:2014 数字可寻址照明接口.第101部分:系统的一般要求

IEC 62386-101:2014 is applicable to system components in a bus system for control by digital signals of electronic lighting equipment. This electronic lighting equipment should be in line with the requirements of IEC 61347, with the addition of d.c. supplies. This second edition cancels and replaces the first edition published in 2009. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) collection of all bus timing requirements defined in IEC 62386-101:2009 and IEC 62386-102:2009 and rework of the timing requirements to facilitate the preparation of a future control devices standard, taking particular account of the requirements for multi-master systems. The 10 % tolerances have been replaced by minimum and maximum timing values; b) integration of multi-master timing requirements; c) extension of the defined forward frames; d) addition of wiring requirements; e) improvement of the bus power supply requirements; f) improvement of test sequences and description of the test sequences in the form of pseudo code instead of flow charts.

Digital addressable lighting interface - Part 101: General requirements - System components

JG/T 467-2014 建筑室内用发光二极管(LED)照明灯具

本标准规定了在建筑室内照明用发光二极管(LED)照明灯具的术语和定义、分类、要求、试验方法、检验规则、标识、包装、运输和贮存。本标准适用于以LED为光源的采用交流220 V/50 Hz电源供电的固定式通用灯具和嵌入式灯具。本标准不适用于一体化LED光源和应急特殊用途灯具。

Light emitting diode(LED) luminaire for building-indoor

KS C IEC 61231:2014 国际灯编码系统（Ilcos）

코드 시스템은 모든 종류의 램프를 포함한다. 주된 램프 형태에 대한 코드는 정의되어 있으며, 기타에 대한 코드는 이 보고서의 수정된 내용에 적절히 따라야 한다.

International lamp coding system (ILCOS)

KS C IEC 62471-2:2014 灯和灯系统的光生物学安全 第2部分：与非激光光辐射安全相关的制造要求指南

이 표준은 비레이저 제품의 광학적 안전요구사항에 대한 기본사항을 제공하는 한편, 제품의 수직 기준의 안전요구사항 개발을 위한 지침으로 사용할 수 있다. 또한 램프 제조업체가 제공하는 안전정보의 해석에 있어 램프 시스템 제조업체에 도움이 될 수 있다.이 보고서는 다음에 대한 지침을 제공한다.? 광학적 방사선 안전평가 요구사항? 안전 측정의 분류? 제품의 라벨링이 기준은 적절한 표준을 통하여 특정한 안전사항을 취급하는 선탠용 장비, 안과용 장비 또는 기타 의료/화장용 장비의 광학적 방사선에 대한 의도적 노출에 필요한 안전요구사항은 취급하지 않는다.LED 제품의 광생물학적 안전성은 IEC 62471의 표 6.1에 따라 시험하였을 때, 다음 값 이하이어야 한다.― 자외선 위험(200 nm∼400 nm): 위험 그룹 1 미만― 망막 청색광 위험(300 nm∼400 nm): 위험 그룹 1 이하― 망막 청색광 또는 열위험(400 nm∼780 nm): 위험 그룹 1 이하― 각막/수정체 적외선 위험(780 nm∼3 000 nm): 위험 그룹 1 미만― 망막 열위험(780 nm∼1 400 nm): 위험 그룹 1 미만?

Photobiological safety of lamps and lamp systems — Part 2: Guidance on manufacturing requirements relating to non-laser optical radiation safety

KS C IEC 62471-2-2014(2019) 灯和灯系统的光生物安全性 - 第2部分:关于非激光光辐射安全的制造要求指导

Photobiological safety of lamps and lamp systems — Part 2: Guidance on manufacturing requirements relating to non-laser optical radiation safety

DB43/T 672-2014 LED路灯

LED street light

GSO IEC 61231:2014 国际灯编码系统（ILCOS）

IEC 61231:2010+A1:2013 gives the rules for the international lamp coding system and covers all lamp categories, excluding vehicle lamps. Coding for the main lamp types is specified and, for the others, will follow by amendments to this standard as appropriate. This first edition cancels and replaces the second edition of IEC 61231, published as a technical specification. It constitutes a technical revision, of which the main changes are indicated below: - introduction of LED modules (Subclause 5.8). This consolidated version consists of the first edition (2010) and its amendment 1 (2013). Therefore, no need to order amendment in addition to this publication.

International lamp coding system (ILCOS)

QB/T 4737-2014 爆炸性环境用隔爆型灯具

本标准规定了爆炸性环境用隔爆型灯具(以下简称灯具)的术语和定义、要求和试验方法、检验规则、标志和使用说明书、包装、运输和贮存。本标准适用于由隔爆外壳“d”保护的除煤矿瓦斯气体之外的其他爆炸性气体环境用隔爆型灯具。该灯具使用除游离金属钠灯(符合IEC 60192的低压钠灯)以外的电光源且电源电压不超过1 000 V。

Luminaires protected by flameproof enclosures for explosive atmosphere

QB/T 4738-2014 爆炸性环境用增安型灯具

本标准规定了除煤矿瓦斯气体之外的其他爆炸性气体环境用增安型灯具(以下简称灯具)的术语和定义、要求和试验方法、检验规则、标志和使用说明书、包装、运输和贮存。本标准适用于电源电压不超过1 000 V的爆炸性环境用增安型灯具(以下简称“灯具”)。本标准的灯具使用的光源应是下列类型之一:a) 具有符合GB/T 1406.1-2008规定的单插脚的无启动器荧光灯(Fa6);b) 具有符合GB 18774-2002的G5或G13的管式双插脚荧光灯,插脚由黄铜制造。灯头和灯座符合GB 3836.3-2010中5.3.3的规定,这样的灯应接成启动和运行无阴极预热的电路;c) 符合GB/T 10681-2009和GB 14196.1-2008的通用照明钨丝白炽灯。

Luminaires protected by increased safety for explosive atmosphere

GSO IEC 62386-101:2013 数字接口可寻址照明表面 第101部分：一般要求 系统

IEC 62386-101:2009 specifies a protocol for control by digital signals of electronic lighting equipment used on a.c. or d.c. supplies. This Part 101 is intended to be used in conjunction with Part 102, which contains general requirements for the relevant product type (control gear), and with the appropriate part 2XX (particular requirements for control gear) containing clauses to supplement or modify the corresponding clauses in Parts 101 and 102 in order to provide the relevant requirements for each type of product. This International Standard, together with IEC 62386-102 and IEC 62386-201, replaces Clause E.4, "Control by digital signals", and Annex G, "Test procedures".

Digital addressable lighting interface - Part 101: General requirements - System

DB41/T 848-2013 微显示投影用LED光源

LED light source for micro display projection

IEC TR 62493-1:2013 与人体暴露在电磁场中有关的照明设备的评估.第1部分:VDE测试和认证协会和德国电气和电子制造商协会ZVEI的EMF测量活动的结果

This part of the IEC 62493 series presents an overview on EMF measurement results dependent on different lamp technologies used in current luminaires. For the measurement only the test procedure with the so called Van der Hoofden head in the frequency range from 20 kHz to 10 MHz was used.

Assessment of lighting equipment related to human exposure to electromagnetic fields - Part 1: Results of the EMF measurement campaign from the VDE Test and Certification Institute and ZVEI, the Germa

IEC 61231:2010+AMD1:2013 CSV 国际车灯编码系统（ILCOS）

International lamp coding system (ILCOS)

DB41/T 799-2013 无线智能照明控制装置

Wireless Smart Lighting Control Device