29.160 旋转电机 标准查询与下载

GOST IEC 60034-18-34-2014 旋转电机. 第18-34部分. 绝缘体系的功能评定. 模绕组的试验程序. 绝缘系统热机械耐久性评估

Rotating electrical machines. Part 18-34. Functional evaluation of insulation systems. Test procedures for form-wound windings. Evaluation of thermomechanical endurance of insulation systems

GOST IEC 60034-9-2014 旋转电机. 第9部分. 噪声限度

Rotating electrical machines. Part 9. Noise limits

SNI IEC 60034-4:2014 旋转电机 第4部分：通过试验确定同步电机幅值的方法

Rotating electrical machines Part 4: Methods of experimentally determining the amplitude of synchronous machines

GSO IEC 60034-30:2013 旋转电机 第30部分：三相单速鼠笼电机的效率等级

IEC 60034-30:2008 specifies efficiency classes for single-speed, three-phase, 50 Hz and 60 Hz, cage-induction motors.

Rotating electrical machine -part 30: Efficiency classes of single -speed ,three phase ,cage induction motors (IE-code)

GSO IEC 60034-22:2013 旋转电动机构 第22部分：往复式发动机驱动发电机组的交流发电机

IEC 60034-22:2009 establishes the principal characteristics of a.c. generators under the control of their voltage regulators when used for reciprocating internal combustion engine driven generating set applications and supplements the requirements given in IEC 60034-1. It covers the use of such generators for land and marine use, but excludes generating sets used on aircraft or used to propel land vehicles and locomotives. The most important changes with respect to the previous edition are: - technical changes to many definitions; - revision of table 1 and of the annex.

Rotating electrical machines - Part 22: AC generators for reciprocating internal combustion (RIC) engine driven generating sets

GSO IEC/TS 60034-31:2013 旋转电机 第31部分：不同速度应用的整体能效电机的选择 应用指南

IEC/TS 60034-31:2010 provides a guideline of technical aspects for the application of energy-efficient, three-phase, electric motors. It not only applies to motor manufacturers, original equipment manufacturers, end users, regulators and legislators but to all other interested parties. Is applicable to all electrical machines covered by IEC 60034-30.

Rotating electrical machine -Part 31: Selection of energy efficient motors including variable speed applications - Application guide

GSO IEC 60034-16-1:2013 旋转电机 第16-1部分：同步电机励磁系统 定义

IEC 60034-16-1:2011 defines terms applicable to the excitation systems of synchronous rotating electrical machines. The main technical changes with respect to the previous edition are some definitions which were added and some others which were brought up-to-date.

Rotating electrical machine - part 16-1: Excitation systems for synchronous machine -Definitions

GSO IEC 60034-14:2013 旋转电机 第14部分：轴高50毫米或以上的某些类型机器的机械振动 振动严重程度的测量、估计和限制

Specifies the factory acceptance vibration test procedures and vibration limits for certain electrical machines under specified conditions, when uncoupled from any load or prime mover. Is applicable to d.c. and three-phase a.c. machines, with shaft heights 56 mm and higher and a rated output up to 50 MW, at operational speeds up to 15 000 per minute. This consolidated version consists of the third edition (2003) and its amendment 1 (2007). Therefore, no need to order amendment in addition to this publication.

Rotating electrical machine -part 14: Mechanical vibration of certain machine with shaft heights 56 mm and higher-Measurement, evaluation and limits of vibration severity

DB36/T 719-2013 永磁发电机技术条件

Technical conditions of permanent magnet generator

EN 60034-28:2013 旋转电机 第28部分：三相低压笼型感应电动机等效电路图数量测定的试验方法

IEC 60034-28:2012 applies to three-phase low-voltage cage induction motors of frame numbers 56 to 400 as specified in IEC 60072-1. This standard establishes procedures to obtain values for elements of single phase equivalent circuit diagrams from tests and defines standard elements of these diagrams. This edition includes the following significant technical changes with respect to the previous edition: - the formulae are now all given for equivalent star-connection equivalent circuit diagrams; - procedures for the determination of equivalent circuit parameters from a load curve test as an alternative to the reverse rotation and locked rotor tests have been added.

Rotating electrical machines - Part 28: Test methods for determining quantities of equivalent circuit diagrams for three-phase low-voltage cage induction motors

LST EN 60034-18-21-2013 旋转电机. 第18-21部分: 绝缘系统的功能评定. 线绕绕组的试验规程. 热评估和分类(IEC 60034-18-21-2012)

Rotating electrical machines -- Part 18-21: Functional evaluation of insulation systems - Test procedures for wire-wound windings - Thermal evaluation and classification (IEC 60034-18-21:2012)

DB34/T 1878-2013 YLV系列低压大功率三相异步电动机技术条件（机座号400-450）

本标准规定了YLV系列低压大功率三相异步电动机的型式、基本参数与尺寸、技术要求、检验规则、标志、包装及保用期的要求。 本标准适用于YLV系列低压大功率三相异步电动机（机座号 400～450）（以下简称电动机）。凡属本系列电动机所派生的各种系列电动机也可参照执行。

Technical conditions of YLV series low-voltage high-power three-phase asynchronous motors (frame size 400-450)

DB34/T 1880-2013 YXVF系列（IP55）高效率变频调速三相异步电动机技术条件（机座号80-355）

本标准规定了 YXVF 系列(IP55)高效率变频调速三相异步电动机的型式、基本参数与尺寸，技术要求，检验规则，试验方法，标志、包装及保用期的要求。 本标准适用于 YXVF 系列(IP55)高效率变频调速三相异步电动机(机座号80～355)（以下简称电动机）。 凡属本系列电动机所派生的各种系列电动机也可参照执行。

Technical conditions of YXVF series (IP55) high-efficiency variable frequency speed regulation three-phase asynchronous motor (frame size 80-355)

DB34/T 1879-2013 YP2系列宽频三相异步电动机技术条件（机座号63-355）

本标准规定了 YP2 系列宽频三相异步电动机的型式、基本参数与尺寸，技术要求，检验规则，试验方法，标志、包装及保用期的要求。 本标准适用于 YP2 系列宽频三相异步电动机(机座号 63～355)（以下简称电动机）。凡属本系列电动机所派生的各种系列电动机也可参照执行。

Technical conditions of YP2 series broadband three-phase asynchronous motor (frame size 63-355)

EN 60034-18-21:2013 旋转电机 第 18-21 部分：绝缘系统的功能评估 绕线绕组的测试程序 热评估和分类

IEC 60034-18-21:2012 gives test procedures for the thermal evaluation and classification of insulation systems used or proposed for use in wire-wound alternating current (a.c.) or direct current (d.c.) rotating electrical machines. The test performance of a candidate insulation system is compared to the test performance of a reference insulation system with proven service experience. The main technical changes with regard to the previous edition can be seen in the introduction of some basic statistical methods in the evaluation of comparative data. Moreover, the standard states a simpler use of different test procedures.

Rotating electrical machines - Part 18-21: Functional evaluation of insulation systems - Test procedures for wire-wound windings - Thermal evaluation and classification

SNI IEC 60034-3:2013 旋转电机 第3部分：由蒸汽轮机或燃气轮机驱动的同步发电机的特殊要求

Rotating electrical machines Part 3: Particular requirements for synchronous generators driven by steam or gas turbines

SNI IEC 60034-1:2013 旋转电机 第1部分：额定值和性能

Rotating electrical machines - Part 1: Rating and performance

SNI 7857-2013 旋转电机 第30部分：笼式感应电动机的效率等级 三相 单速（代码 IE）

Rotating electrical machines Part 30: Efficiency classes for cage induction motors three-phase single speed (code IE)

LST EN 60034-18-34-2012 旋转电机 第 18-34 部分：绝缘系统的功能评估 成型绕组的测试程序 绝缘系统的热机械耐久性评估（IEC 60034-18-34:2012）

Rotating electrical machines -- Part 18-34: Functional evaluation of insulation systems - Test procedures for form-wound windings - Evaluation of thermomechanical endurance of insulation systems (IEC 60034-18-34:2012)

LST EN 60034-18-31-2012 旋转电机 第 18-31 部分：绝缘系统的功能评估 成型绕组的测试程序 旋转电机中使用的绝缘系统的热评估和分类

Rotating electrical machines -- Part 18-31: Functional evaluation of insulation systems - Test procedures for form-wound windings - Thermal evaluation and classification of insulation systems used in rotating machines