31.020 电子元器件综合 标准查询与下载

SN/T 2005.3-2006 电子电气产品中多溴联苯和多溴二苯醚的测定.第3部分:气相色谱-氢火焰离子化检测器法

本部分规定了电子电气产品中多溴联苯和多溴二苯醚的气相色谱-氢火焰离子化检测器测定方法。 本部分适用于电子电气产品中多溴联苯和多溴二苯醚的测定。

Determination of polybromobiphenyls and polybromobiphenyl in electrical and electronic equipment - Part 3: GC-FID method

SN/T 2003.2-2006 电子电气产品中多溴联苯和多溴二苯醚的测定.第2部分:红外光谱定性筛选法

本部分规定了电子电气产品聚合物材料中多溴联苯和多溴二苯醚傅立叶变换红外光谱(FT-IR)定性筛选方法。 本部分适用于电子电气产品聚合物材料中多溴联苯和多溴二苯醚的红外定性筛选。

Determination of polybrominatedbiphenyls and polybrominatedbiphenyl ether in electrical and electronic equipments - Part 2: Qualitative screening by infra-red spectrometric method

SN/T 2003.3-2006 电子电气产品中铅、汞、镉、铬和溴的测定.第3部分:X射线荧光光谱定量筛选法

本部分规定了用波长色散X射线荧光光谱法定量筛选电子电气产品中铅、汞、镉、铬和溴的测定方法。 本部分适用于电子电气产品中铅、汞、镉、铬和溴的定量筛选测定，它覆盖了电子电气产品的所有材料类型如聚合物、金属制品和电子制品。 本标准适用于待测元素的浓度范围如表1所示。

Determination of Lead, Mercury, Chromium, Cadmium and Bromine in electrical and electronic equipments - Part 3: Qualitative screening by X-ray fluorescence spectrometric method

SN/T 2004.4-2006 电子电气产品中铅、镉、铬、汞的测定.第4部分:电感耦合等离子体原子发射光谱法

本部分规定了电感耦合等离子体原子发射光谱法(ICP-AES)测定电子电气产品聚合物(聚四氟乙烯除外)、金属材料、电子元器件中铅(Pb)，镉(Cd)，铬(Cr)和汞(Hg)的方法。 本部分适用于电子电气产品聚合物(聚四氟乙烯除外)、金属材料、电子元器件中铅(Pb)，镉(Cd)，铬(Cr)和汞(Hg)的测定，各元素的检出限如表1所示。

Determination of Lead, Cadmium, Chromium and Mercury in electrical and electronic equipments - Part 4: Inductively coupled plasma atomic emission spectrometric method

DLA DSCC-VID-V62-05607 REV B-2006 微型电路,数字型,定点数字信号处理器,单块硅

This drawing documents the general requirements of a high performance Fixed-Point Digital Signal Processor microcircuit, with an operating temperature range of -40°C to +105°C (devices 01-03), -40°C to +85°C (device 04).

MICROCIRCUIT, DIGITAL, FIXED POINT DIGITAL SIGNAL PROCESSOR, MONOLITHIC SILICON

IEC 61760-1:2006 表面安装技术.第1部分:表面安装元件(SMDS)规范的标准方法

This International Standard gives a reference set of process conditions and related test conditions to be used when compiling component specifications of electronic components that are intended for usage in surface mount technology.

Surface mounting technology - Part 1: Standard method for the specification of surface mounting components (SMDs)

LST EN 61360-4-2005/AC-2006 标准数据元素类型和相关的电气元件分类表 第4部分：标准数据元素类型和组件类的 IEC 参考集（IEC 61360-4:2005）

Standard data element types with associated classification sheme for electric components. Part 4: IEC reference collection of standard data element types and component classes (IEC 61360-4:2005)

JIS C 0806-6:2006 自动化处理用组件的包装.第6部分:表面安装组件的散装箱包装

この規格は，表面実装部品(以下,SMDという。)を収納するバルクケースによるパッケージングについて規定する。バルクケースは，部品の輸送，保管及び直接又は適切なフィーダを用いて装着機に部品を供給できるように設計されている。バルクケースは，接続部によってフィーダ又は自動装着機に取り付ける。

Packaging of components for automatic handling -- Part 6: Bulk case packaging for surface mounting components

CEA-936-A-2006 USB车载规格

This section describes the electrical characteristics of the interface between the phone and the carkit. Throughout CEA-936-A, parameter values are referred to by their associated names. The numerical values for all of these parameters shall be as specified in Section 9 .

USB Carkit Specification

DD IEC/PAS 62435:2005 电子元器件 电子元件的长期储存 实施指南

Electronic components. Long duration storage of electronic components. Guidance for implementation

DLA QPL-15109-39-2006 电阻和可变电阻.海军舰载

This list has been prepared for use by or for the Government in the acquisition of products covered by Specification MIL-DTL-15109. Listing of a product is not intended to and does not connote endorsement of the product by the Department of Defense.

RESISTORS AND RHEOSTATS, NAVAL SHIPBOARD

CEA-2014-2006 UPnP网络和国际互联网络(Web4CE)的远程用户界面用网络协议和框架

This standard defines the necessary mechanisms to allow a user interface to be remotely displayed on and controlled by devices or control points other than the one hosting the logic. The basic device operations are based on the UPnP Device Architecture v1.0 for UPnP networks and UPnP devices in the home.

Web-based Protocol and Framework for Remote User Interface on UPnP(TM) Networks and the Internet (Web4CE)

CEA-2010-2006 电动超低音音箱测量的标准方法

This standard defines a method for measuring the audio performance of powered subwoofers.

Standard Method of Measurement for Powered Subwoofers

DLA MIL-PRF-27208 F-2006 非精密绕线可变电阻 常规

This specification covers the general requirements for multiturn, lead-screw actuated and single turn wire wound, variable resistors with a contact bearing uniformly over the entire surface of the entire resistive element, wound linearly, when positioned by an actuator. These resistors are capable of full load operation (where maximum resistance is engaged) at maximum ambient temperature of 85oC, and are capable for continuous operation when properly derated, at a maximum temperature of 150oC (see figure 2). These resistors have a resistance tolerance of ±5 percent (see 3.1).

RESISTOR, VARIABLE, WIRE WOUND, NONPRECISION GENERAL SPECIFICATION FOR

DS/EN 61360-4:2005 具有相关电气元件分类方案的标准数据元素类型 第4部分：标准数据元素类型和元件类别的 IEC 参考集

This part of IEC 61360 specifies within two dictionaries: - the definitions of data element types for electric components and materials used in electrotechnical equipment and systems;- the definitions of the component classes with associated classification scheme. These definitions are related to electric components including electronic and electromechanical components and materials used in electrotechnical equipment and systems. The object of this standard is to provide a set of uniquely-identified data element types with - an unambiguously defined meaning; - a defined value format, and - a prescribed value domain for the non-quantitative data element type

Standard data element types with associated classification scheme for electric components - Part 4: IEC reference collection of standard data element types and component classes

SANS 62103:2005 电力装置用电子设备

Applies to the use of electronic equipment (EE) in power installations where a uniform technical level with respect to safety and reliability is necessary.

Electronic equipment for use in power installations

QC 001002-5-2005 电子元器件IEC质量评定体系(IECQ).第5部分:危险品处理管理要求

IEC Quality assessment system for Electronic Components (IECQ) - Rules of procedure - Part 5: Hazardous substance process management requirements

LST EN 60062-2005 电阻器和电容器的标记代码（IEC 60062:2004）

Marking codes for resistors and capacitors (IEC 60062:2004)

CEA-2032-2005 室内电视接收天线的性能标准

This standard defines test and measurement procedures for determining the performance of indoor TV receiving antennas. It replaces CEA CEB7, TV Receiving Antenna Manufacturers Guide to Indoor Antennas for Use with the CEA Indoor TV Antenna Certification Program.

Indoor TV Receiving Antenna Performance Standard

DS/EN 61360-5:2005 标准数据元素类型和相关的电气元件分类方案 第5部分：EXPRESS 字典模式的扩展

Provides the extension of the common ISO/IEC dictionary schema for the definition of concepts which are used in EN 61360-1 but which are not addressed by the information models specified in EN 61360-2. Provides a formal model for data and provides, with EN 61360-2, a means for the computer-sensible representation and exchange of all data which comply with EN 61360-1.

Standard data element types with associated classification scheme for electric components – Part 5: Extensions to the EXPRESS dictionary schema