31.040 电阻器 标准查询与下载

EN 60915:2007 电子设备用电容器和电阻器 轴端、衬套和单孔、衬套安装、轴动电子元件安装的首选尺寸

IEC 60915:2006 contains preferred dimensions for shaft ends and bushes and for the mounting of single-hole, bush-mounted, shaft-operated variable capacitors, variable resistors and potentiometers. If other dimensions not listed in this standard have to be used, it is recommended to select them also from IEC 60390 and IEC 60620. This second edition cancels and replaces the first edition published in 1987 and constitutes a minor revision, related to tables, figures and references. This bilingual version, published in 2008-07, corresponds to the English version. The contents of the corrigendum of December 2008 have been included in this copy.

Capacitors and resistors for use in electronic equipment - Preferred dimensions of shaft ends, bushes and for the mounting of single-hole, bush-mounted, shaft-operated electronic components

DLA MIL-PRF-22 E-2007 (功率型绕线)可变电阻器的一般规格

The General Services Administration has authorized the use of this commercial item description as a replacement for Military Specifications MIL-V-16720E and MIL-V-16721D which are cancelled.

RESISTORS, VARIABLE, (WIREWOUND, POWER TYPE), GENERAL SPECIFICATION FOR

DLA MIL-PRF-22 E SUPP 1-2007 (功率型绕线)可变电阻器的一般规格

This supplement forms a part of MIL-PRF-22E, dated 1 May 2007

RESISTORS, VARIABLE, (WIREWOUND, POWER TYPE), GENERAL SPECIFICATION FOR

DLA MIL-R-93 F-2007 (准确)线绕式固定电阻器的一般规定

This specification covers the general requirements for accurate, wire-wound, fixed resistors having a maximum resistance tolerance of 1 percent, with the winding protected against high humidity. The resistors are rated for continuous full load operation at any ambient temperature up to 125°C, and derated up to 145°C. They are not capable for application where alternating current (ac) characteristics are of critical importance. Performance characteristics are in accordance with table I.

RESISTORS, FIXED, WIRE-WOUND (ACCURATE), GENERAL SPECIFICATION FOR

DLA MIL-R-93 F SUPP 1-2007 (准确)线绕式固定电阻器的一般规定

The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http://assist.daps.dla.mil.

RESISTORS, FIXED, WIRE-WOUND (ACCURATE), GENERAL SPECIFICATION FOR

ARMY MIL-PRF-55182 H (2)-2007 非永久性能最佳性和永久性能最佳性和空间基准普通规格薄片固定电阻器

This specification covers the general requirements for nonestablished reliability(non-ER), established reliability(ER), and space level that are hermetically or nonhermetically sealed fixed film resistors that have a high degree of stability with respect to time under severe environmental conditions.

RESISTORS, FIXED, FILM, NONESTABLISHED RELIABILITY, ESTABLISHED RELIABILITY, AND SPACE LEVEL, GENERAL SPECIFICATION FOR

DLA QPL-39035-84-2007 无线绕(调整型)可变电阻器无定制可靠性和定制可靠性一般规格

An asterisk (*) adjacent to the product listing indicates that qualified parts listed on the QPL are available through distributors authorized by the manufacturer in accordance with Military Standard MIL-STD-790. Names and addresses of the distributors are listed in the back of this QPL. This list of authorized distributors is being furnished merely as an aid in identifying authorized sources of ER parts and the responsibility for complying withcontractual provisions requiring use of such parts rests with the user of such parts. This list has been compiled from information furnished by the manufacturers of ER parts prior to release of this QPL.

RESISTORS, VARIABLE, NONWIRE WOUND (ADJUSTMENT TYPE), NONESTABLISHED RELIABILITY, AND ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR

DLA MS75009 REV J (2)-2007 (功率型)后端盖组件电阻器

The requirements for acquiring the product described herein shall consist of this specification sheet and the latest issues of MIL-PRF-26, and MIL-R-19365.

BRACKET ASSEMBLY, RESISTOR (POWER TYPE)

KS C IEC 61643-331-2006(2019) 低压浪涌保护器元件第331部分:金属氧化物压敏电阻器（MOV）规范

Components for low－voltage surge protective devices－Part 331：Specification for metal oxide varistors(MOV)

KS C IEC 61643-331:2006 低压电涌保护装置用元件.第331部分:金属氧化物压敏电阻(MOV)规范

이 규격은 산화 금속 배리스터(MOV)에 대한 시험 요구 조건을 규정하며, 교류 1 000

Components for low－voltage surge protective devices－Part 331：Specification for metal oxide varistors(MOV)

JIS C 5381-331:2006 低压电涌保护装置用元件.第331部分:金属氧化物变阻器(MOV)用规范

この規格は，交流1000V以下又は直流1500V以下の電源線，通信回線又は信号回線に使用する金属酸化物バリスタ(以下,MOVという。)の試験方法について規定する。MOVは，高い過渡電圧から装置若しくは装置各部又は両者を保護するように設計されている。

Components for low-voltage surge protective devices -- Part 331: Specification for metal oxide varistors (MOV)

DLA QPL-22097-103-2006 (调整型)非线绕式可变电阻器.一般规格

THE ACTIVITY RESPONSIBLE FOR THIS QPL IS THE DEFENSE SUPPLY CENTER COLUMBUS (DSCC-VQ), COLUMBUS, OH 43218-3990.

RESISTORS, VARIABLE, NONWIRE WOUND (ADJUSTMENT TYPE), GENERAL SPECIFICATION FOR

DLA QPL-29-53-2006 固定电阻器 外部(高电压,套圈终端型)仪表量程倍增器

This list has been prepared for use by or for the Government in the procurement of products covered by Specification MIL-PRF-29. Listing of a product is not intended to and does not connote endorsement of the product by the Department of Defense.

RESISTORS, FIXED, METER MULTIPLIER, EXTERNAL (HIGH VOLTAGE, FERRULE TERMINAL TYPE)

DLA MIL-PRF-26 H-2006 (功率型绕线)固定电阻器的一般规格

This specification covers the general requirements for power type, wire-wound, fixed resistors for use in electrical, communications, and associated equipment. Included are general purpose styles of 5 percent initial resistance tolerance, with power ratings ranging from 3 watts to 240 watts at 25OC, derated to 0 power at 350OC (characteristics N and V) and precision axial lead types of .1(B) percent, .5 (D) percent, and 1 (F) percent initial resistance tolerances with power ratings ranging from 1 watt to 10 watts at 25OC, derated to 0 power at 250OC (characteristic U).

RESISTORS, FIXED, WIRE WOUND (POWER TYPE) GENERAL SPECIFICATION FOR

DLA MIL-PRF-39023 D-2006 精密非绕线可变电阻器一般规范

1.1 Scope. This specification covers the general requirements for precision, nonwirewound, variable resistors whose electrical output (in terms of percent of applied voltage) are linear or nonlinear with respect to the angular position of the operating shaft. This specification includes requirements for linear and nonlinear, single turn and multiturn, single-section (cup) and multi-section variable resistors. These resistors have a resistance tolerance of ±10 percent. These resistors are capable of full-load operation at maximum ambient temperatures of 70OC and are capable for continuous operation, when properly derated, to maximum temperatures of 125OC, (see 3.1, 6.2, and figure 10). This specification includes procedures and requirements for the acquisition of category I, category II, and category III precision resistors. 1.2 Classification. 1.2.1 Part or Identifying Number (PIN).

RESISTORS, VARIABLE, NONWIREWOUND, PRECISION GENERAL SPECIFICATION FOR

DLA MIL-PRF-39023 D SUPP 1-2006 精密非绕线可变电阻器一般规范

This supplement forms a part of MIL-PRF-32023D, dated 5 September 2006.

RESISTORS, VARIABLE, NONWIREWOUND, PRECISION GENERAL SPECIFICATION FOR

DLA QPL-23648-29-2006 隔热电阻器(热敏电阻).一般规格

This list has been prepared for use by or for the Government in the acquisition of products covered by Specification MIL-PRF-23648. Listing of a product is not intended to and does not connote endorsement of the product by the Department of Defense.

RESISTORS, THERMAL (THERMISTOR) INSULATED, GENERAL SPECIFICATION FOR

DLA MIL-PRF-94 G-2006 可变电阻器部件的一般规格

This specification covers the variable resistors having a composition resistance element shaped in an arc, and a contact bearing uniformly thereon, so that a change in resistance is produced between the terminal of the contact and the terminal of either end of the resistance element when the operating shaft is turned. These resistors are capable of full load operation (where maximum resistance is engaged) at a maximum ambient temperature of 70OC, and are capable for continuous operation when properly derated, at a maximum temperature of 120OC

RESISTORS, VARIABLE, COMPOSITION, GENERAL SPECIFICATION FOR

DLA MIL-PRF-94 G SUPP 1-2006 可变电阻器部件的一般规格

This supplement forms a part of MIL-PRF-94G, Dated 2 June 2006.

RESISTORS, VARIABLE, COMPOSITION, GENERAL SPECIFICATION FOR

DLA MIL-PRF-83401 H-2006 电阻网络,电容电阻网络,陶瓷电容器及固定薄膜电阻器的一般规定

Scope. This specification covers the general requirements for hermetically sealed (see 3.10) and nonhermetically sealed (see 3.10.1) networks. These networks consist entirely of fixed, film resistors, or fixed, film resistors and ceramic capacitors. They are primary intended for use in electronic circuits. This specification has two product levels, a high reliability, 100 percent burn-in screened “M” part number level and nonburn-in screened (without the mandatory conformance inspection) part number level “C” (see 1.2.1).

RESISTOR NETWORKS, FIXED, FILM, AND CAPACITOR-RESISTOR NETWORKS, CERAMIC CAPACITOR AND FIXED, FILM, RESISTORS, GENERAL SPECIFICATION FOR