31.120 电子显示器件 标准查询与下载

GOST R IEC 61747-2-2-2017 液晶显示装置. 第2-2部分: 矩阵彩色液晶显示模块. 空白详细规格

Liquid crystal display devices. Part 2-2. Matrix colour LCD modules. Blank detail specification

GOST R IEC 61747-2-2017 液晶显示装置. 第2部分: 液晶显示模块. 分段规格

Liquid crystal display devices. Part 2. Liquid crystal display modules. Sectional specification

GOST R IEC 61747-3-2017 液晶显示装置. 第3部分: 液晶显示( LCD )单元. 分段规格

Liquid crystal display devices. Part 3. Liquid crystal display (LCD) cells. Sectional specification

GOST R IEC 61747-20-1-2017 液晶显示装置. 第20-1部分: 目视检查. 单色液晶显示单元(不包括所有有源矩阵液晶显示单元)

Liquid crystal display devices. Part 20-1. Visual inspection. Monochrome liquid crystal display cells (excluding all active matrix liquid crystal display cells)

BS IEC 62908-13-10:2016 触摸和交互式显示器 触摸显示器的可靠性测试方法 环境耐久性试验方法

Touch and interactive displays. Reliability test methods of touch displays. Environmental durability test methods

GSO IEC 61747-1-1:2016 液晶显示设备 第1-1部分：通用 通用规范

IEC 61747-1-1:2014 is a generic specification for liquid crystal display devices. It defines general procedures for testing and gives general rules for the measuring methods of the electrical and optical characteristics, the rules for climatic and mechanical tests, and the rules for endurance tests. This first edition cancels and replaces the first edition of IEC 61747-1 published in 1998 and Amendment 1:2003. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) IEC 61747-1, has been divided into IEC 61747-1-1, Liquid crystal display devices - Part 1-1: Generic - Generic specification and IEC 61747-1-2, Liquid crystal display devices - Part 1-2: Generic - Terminology and letter symbols; b) the contents of the terminology have been transferred to IEC 61747-1-2; c) Annex C has been changed from normative to informative, because Tables C.1 and C.2 mismatch some of the large scale production practices of recent date; d) References cited have been updated.

Liquid crystal display devices - Part 1-1: Generic - Generic specification

GSO IEC 61747-20-1:2016 液晶显示装置 第20-1部分：目视检查 单色液晶显示单元（不包括所有有源矩阵液晶显示单元）

IEC 61747-20-1:2015(E) gives the details of testing and provides general rules for visual inspection of the non-active and active area of monochrome liquid crystal display cells by the human eye, if necessary, through an optical microscope. Furthermore this standard includes defect definitions and the methods for visual defect inspection. This first edition cancels and replaces Clause 6 of the first edition of IEC 61747-5 published in 1998. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) The editorial modifications were done in accordance with the ISO/IEC Directives, Part 2, Ed 6.0:2011. b) The document number was changed to align with the new numbering structure of the IEC 61747 series.

Liquid crystal display devices - Part 20-1: Visual inspection - Monochrome liquid crystal display cells (excluding all active matrix liquid crystal display cells)

IEC 62908-13-10:2016 触摸和交互式显示器 第 13-10 部分：触摸显示器的可靠性测试方法 环境耐久性测试方法

This part of IEC 62908 specifies the methods for testing the environmental durability of touch display modules, touch sensor modules and test pattern cells, and can be used for devices at the production level, the prototype level or the trial model level when they are exposed to environmental stress. This document is applicable for touch displays that use capacitive or resistive detection sensors. It may also be applicable to other types of sensors as well as to touch display modules with both flat and flexible displays.

Touch and interactive displays - Part 13-10: Reliability test methods of touch displays - Environmental durability test methods

SJ/T 11461.6.2-2016 有机发光二极管显示器件 第6-2部分：测试方法-视觉质量

Organic light-emitting diode display devices Part 6-2: Test methods - Visual quality

GSO IEC 62629-12-1:2016 3D 显示设备 第12-1部分：使用眼镜的立体显示器测量方法 光学

IEC 62629-12-1:2014 determines the following measuring methods for characterizing the performance of stereoscopic display devices using either active or passive glasses. This standard focuses on the types of stereoscopic displays using glasses as follows: The types of stereoscopic displays reproducing temporally interlaced images and applicable glasses are: - displays representing temporally interlaced (high frame rate) images and active glasses (time dividing shutter glasses), and - displays with front screen switchable polarizer representing temporally interlaced images and linear or circular polarizer passive glasses. The types of stereoscopic displays reproducing spatially interlaced images and applicable glasses are: - displays with patterned retarder representing spatially interlaced images and linear or circular polarizer passive glasses. Some parts of these measuring methods may also be applied to other types of stereoscopic displays using glasses not listed above

3D Display devices - Part 12-1: Measuring methods for stereoscopic displays using glasses - Optical

GSO IEC 61747-1-2:2016 液晶显示设备 第1-2部分：通用 术语和字母符号

IEC 61747-1-2:2014 gives the preferred terms, their definitions and symbols for liquid crystal devices, with the object of using the same terminology when publications are prepared in different countries. This first edition cancels and replaces the first edition of IEC 61747-1 published in 1998 and Amendment 1:2003. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) The former IEC 61747-1, Generic specification was divided into IEC 61747-1-1, Liquid crystal display devices - Part 1-1: Generic - Generic specification and IEC 61747-1-2, Liquid crystal display devices - Part 1-2: Generic - Terminology and letter symbols; b) In this part of IEC 61747, new terms have been added and some of the terms and the definitions have been updated.

Liquid crystal display devices - Part 1-2: Generic - Terminology and letter symbols

SN/T 3480.3-2016 进口电子电工行业成套设备检验技术要求 第3部分：平板显示器制造专用设备

Technical requirements for inspection of complete sets of equipment for the imported electronics and electrical industry Part 3: Special equipment for flat panel display manufacturing

ISO/TS 21144:2016 人机交互的人体工程学 - 电子纸显示 - 室内使用

Ergonomics of human-system interaction — Electronic paper display — Indoor use

IEC 61747-30-4:2016 液晶显示装置. 第30-4部分: 液晶显示模块的测量方法. 动态背光组件

This part of IEC 61747 specifies the standard measurement conditions and measuring methods for determining the optical performance and power consumption of active matrix liquid crystal display modules with dynamic backlight units.

Liquid crystal display devices - Part 30-4: Measuring methods for liquid crystal display modules - Dynamic backlight units

BS PD IEC/TS 62715-5-2:2016 柔性显示装置. 曲面显示优势位置光学特征的测量方法

Flexible display devices. Measuring methods of optical characteristics from the vantage point for curved displays

ASTM F1709-97(2016) 电子薄膜用高纯钛溅射靶的标准规范

1.1 This specification covers pure titanium sputtering targets used as a raw material in fabricating semiconductor electronic devices. 1.2 This standard sets purity grade levels, physical attributes, analytical methods, and packaging. 1.2.1 The grade designation is a measure of total metallic impurity content. The grade designation does not necessarily indicate suitability for a particular application because factors other than total metallic impurity may influence performance.

Standard Specification for High Purity Titanium Sputtering Targets for Electronic Thin Film Applications

ASTM F1844-97(2016) 使用非接触式涡流量规测量平板显示器制造薄膜导体薄片电阻的标准实践

1.1 This practice describes methods for measuring the sheet electrical resistance of sputtered thin conductive films deposited on large insulating substrates (glass or plastic), used in making flat panel information displays. 1.2 This practice is intended to be used with Test Methods F673. This practice pertains to a “manual” measurement procedure in which an operator positions the measuring head on the test specimen and then personally activates the test apparatus. The resulting test data may be tabulated by the operator, or, alternatively, sent to a computer-based data logging system. Both Methods I and II of Test Methods F673 (paragraphs 3.1 through 3.3.3 of Test Methods F673) are applicable to this practice. 1.3 Sheet resistivity in the range 0.020 to 3000 Ω per square (sheet conductance in the range 3 by 10–4 to 50 mhos per square) may be measured by this practice. The sheet resistance is assumed to be uniform in the area being probed. NOTE 1—Typical manual test units, as described in this practice, measure and report in the units “mhos per square”; this is the inverse of “ohms per square.” 1.4 This practice is applicable to flat surfaces only. 1.5 This practice is non-destructive. It may be used on production panels to help assure production uniformity. 1.6 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Measuring Sheet Resistance of Thin Film Conductors For Flat Panel Display Manufacturing Using a Noncontact Eddy Current Gage

SJ/T 11591.4.2.1-2016 立体显示器件 第4-2-1部分:自由立体 显示器件测量方法 光学和光电

Stereoscopic display devices.Part 4-2-1: Measuring methods for autostereoscopic displays.Optical and Electro-optical

SJ/T 11461.5.2-2016 有机发光二极管显示器件 第5-2部分：机械试验方法

Organic light-emitting diode display devices Part 5-2: Mechanical test methods

SJ/T 11624-2016 发光二极管（LED）显示屏用发光二极管规范

Specification for light-emitting diodes for use in light-emitting diode (LED) displays