31.120 电子显示器件 标准查询与下载

IEC 62977-3-5:2023

IEC 62977-2-11:2023 PRV

T/WHHLW 05-2023 室内P1.25LED显示屏

本文件规定了室内用LED显示屏的术语和定义、分类、检验方法、检验规则以及包装、标志、运输和贮存的要求。

Indoor P1.25LED display

IEC 63145-10:2023

T/CIET 225-2023 产品碳足迹评价导则 Mini LED显示屏

本文件规定了Mini LED显示屏产品碳足迹的规范性引用文件、术语和定义、原则、范围界定、评价流程、核算方法、评价报告等内容。 本文件适用于Mini LED显示屏产品碳足迹的评价。

Product Carbon Footprint Evaluation Guidelines Mini LED Display

T/CIET 224-2023 绿色低碳产品评价规范 Mini LED 显示屏

本文件规定了Mini LED显示屏绿色低碳产品的评价要求、评价方法和流程、产品生命周期报告编制方法。 本文件适用于Mini LED显示屏绿色低碳产品评价。

Green and low-carbon product evaluation specifications Mini LED display

KS C IEC 62715-6-3-2023 柔性显示设备.第6-3部分:机械试验方法.冲击和硬度试验

Flexible display devices — Part 6-3: Mechanical test methods — Impact and hardness tests

KS C IEC 62715-6-1-2023 柔性显示设备.第6-1部分:机械试验方法.变形试验

Flexible display devices — Part 6-1: Mechanical test methods — Deformation tests

DB61/T 1686-2023 户外LED显示屏光学参数测量技术规范

本文件规定了户外LED显示屏光学参数、测量原理、试验条件、测量设备、环境照度测量和最大亮度测量的要求。本文件适用于安装在户外的全彩色、多色或单色LED显示屏测量。

Technical Specifications for Measurement of Optical Parameters of Outdoor LED Display Displays

DB61/T 1687-2023 手机显示屏光学参数测量技术规范

本文件规定了手机显示屏光学参数测量技术基本要求、最大亮度和亮度均匀性、亮度对比度、白场色度、白场色品不均匀度、色域和不同环境光照下的光学参数的要求。本文件适用于手机显示屏产品，其他类似手持式移动终端显示设备参照使用。

Technical specifications for measuring optical parameters of mobile phone display screens

T/GDIOT 002-2023 网联无人机移动通信网络质量通用测试方法

技术内容主要涵盖了网联无人机移动通信网络质量通用测试方法、测试条件、网络质量指标及其分级评估、多指标综合评价。

General test method for network quality of UAV mobile communication network

T/GDIOT 001-2023 网联无人机移动通信网络质量通用 测试方法

主要涵盖网联无人机移动通信网络质量通用测试方法、测试条件、网络质量指标及其分级评估、多指标综合评价。

General test method for network quality of UAV mobile communication network

23/30472056 DC BS IEC 63211-2-23 电子显示器的耐久性测试方法 第 2-23 部分 环境测试 户外风化

BS IEC 63211-2-23. Durability test methods for electronic displays - Part 2-23. Environmental tests. Outdoor weathering

23/30472059 DC BS IEC 62908-42-10 触摸和交互式显示器 第 42-10 部分 交互式投影显示运动跟踪图像控制响应时间的测量方法

BS IEC 62908-42-10. Touch and interactive displays - Part 42-10. Measurement methods of motion-tracking image-control response time for interactive projection display

IEC 62977-3-9:2023 电子显示器 第 3-9 部分：光学性能评估 显示器闪烁对比度

Electronic displays - Part 3-9: Evaluation of optical performance - Display sparkle contrast

IEC 62715-6-22:2023 柔性显示设备.第6-22部分:折痕和波纹度测量方法

Flexible display devices - Part 6-22: Crease and waviness measurement methods

23/30452479 DC BS EN IEC 63211-3-2 电子显示器的耐久性测试方法 第 3-2 部分 机械测试 静态应力

BS EN IEC 63211-3-2. Durability test methods for electronic displays - Part 3-2. Mechanical tests. Static stress

BS IEC 62908-12-10:2023 触摸和交互式显示器 触摸显示器的测量方法 触摸和电气性能

1   Scope This part of IEC 62908 specifies the standard measuring conditions and measurement methods for determining touch and hovering performance of a touch sensor module. This document is applicable to touch sensor modules, where the structural relationship between touch sensor, touch controller, touch sensor module, display panel, touch display panel, and touch display module is defined in IEC 62908‑1‑2.

Touch and interactive displays - Measurement methods of touch displays. Touch and electrical performance

ASTM D5138-23 液晶聚合物模塑和挤压材料（LCP）的标准分类系统和规范基础

1.1 This classification system covers liquid crystal polymeric (LCP) materials suitable for injection molding and extrusion. This classification system allows the use of liquid crystal polymers that are recycled, reconstituted, recycledregrind, recovered, or reprocessed, or a combination thereof, provided that the requirements as stated in this classification system are met. It is the responsibility of the supplier and the buyer of liquid crystal polymers that are recycled, reconstituted, recycled-regrind, recovered, or reprocessed, or a combination thereof, to ensure compliance. 1.2 The properties included in this classification system are those required to identify the compositions covered. Other requirements necessary to identify particular characteristics important to specialized applications are allowed. These shall be agreed upon between the user and the supplier, by using suffixes as given in Section 5. 1.3 This classification system and subsequent line callout (specification) are intended to be a means of calling out plastic materials used in the fabrication of end-use items or parts. It is not intended for the selection of materials. Material selection can be made by those having expertise in the plastics field after careful consideration of the design and the performance required of the part, the environment to which it will be exposed, the fabrication process to be employed, the costs involved, and the inherent properties of the material other than those covered by this classification system. 1.4 The values stated in SI units are to be regarded as standard. 1.5 The following precautionary caveat pertains only to the test method portion, Section 11, of this classification system: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. NOTE 1—There is no known ISO equivalent to this standard. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Classification System and Basis for Specification for Liquid Crystal Polymers Molding and Extrusion Materials (LCP)

IEC 62908-12-10:2023 RLV 触摸和交互式显示器.第12-10部分:触摸显示器的测量方法.触摸和电气性能

Touch and interactive displays - Part 12-10: Measurement methods of touch displays - Touch and electrical performance