33.100 电磁兼容性(EMC) 标准查询与下载
共找到 498 条与 电磁兼容性(EMC) 相关的标准，共 34 页
Electromagnetic compatibility requirements and measurement methods for communication power equipment
- ICS
- 33.100
- CCS
- L06
- 发布
- 2018-12-21
- 实施
- 2019-04-01
Electromagnetic radiation information leakage requirements and measurement methods of telecommunications equipment
- ICS
- 33.100
- CCS
- M04
- 发布
- 2018-12-21
- 实施
- 2019-04-01
Technical specification for detection of lightning protection devices for building electronic systems
- ICS
- 33.100
- CCS
- M04
- 发布
- 2018-12-17
- 实施
- 2019-04-01
本标准规定了民用机场与地面航空无线电台(站)电磁环境测试基本要求、测试频段、测试地点及测试报告的要求。 本标准适用于对民用机场与地面航空无线电台(站)电磁环境的测试与评估。
Standards for testing of electromagnetic environment of civilian airport and aeronautical radio ground stations
- ICS
- 33.100
- CCS
- V06
- 发布
- 2017-06-06
- 实施
- 2017-09-01
本标准规定了通信环境中直流供电的电信和数据通信设备及其供电电源接口部分的电磁兼容要求(如瞬态电压和噪声等)和测量方法。 本标准适用于-48V直流供电的安装在电信中心环境、户外环境和用户楼宇等环境的电信和数据通信设备，以及336V直流电源系统供电的安装在通信局站、数据机房等设施中的电信和数据通信设备。
Technical requirements and test methods of electromagnetic compatibility for DC port Of telecommunication & data equipments
- ICS
- 33.100
- CCS
- M04
- 发布
- 2017-04-12
- 实施
- 2017-07-01
IEC 62236-5:2008 applies to emission and immunity aspects of EMC for fixed power supply installations and electrical and electronic apparatus and systems intended to be used in these installations. This includes the power feed to the apparatus, the apparatus itself with its protective control circuits, trackside items such as switching stations, power autotransformers, booster transformers, substation power switchgear and power switchgear to other longitudinal and local supplies. The main change with respect to the previous edition deals with the requirements for the radiated immunity test.
Railway applications - Electromagnetic compatibility - Part 5: Emission and immunity of fixed power supply installations and apparatus
- ICS
- 33.100
- CCS
- 发布
- 2016-09-27
- 实施
IEC 62153-4-7:2015(E) describes a triaxial method, suitable to determine the surface transfer impedance and/or screening attenuation and coupling attenuation of mated screened connectors (including the connection between cable and connector) and cable assemblies. This method could also be extended to determine the transfer impedance, coupling or screening attenuation of balanced or multipin connectors and multicore cable assemblies. For the measurement of transfer impedance and screening- or coupling attenuation, only one test set-up is needed. This edition includes the following significant technical changes with respect to the previous edition: The document is revised and updated. The changes of the revised IEC 62153-4-3:2013, and IEC 62153-4-4:2015, are included. Measurements can be achieved now with mismatch at the generator site, impedance matching devices are not necessary.
Metallic communication cable test methods - Part 4-7: Electromagnetic compatibility (EMC) - Test method for measuring of transfer impedance ZT and screening attenuation as or coupling attenuation ac of connectors and assemblies up to and above 3 GHz - Tri
- ICS
- 33.100
- CCS
- 发布
- 2016-03-18
- 实施
- 2016-04-13 (7)
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard (CISPR 14-2:2015)
- ICS
- 33.100
- CCS
- 发布
- 2015-09-30
- 实施
- 2015-09-30
This guide describes procedures for the drafting of IEC publications that relate wholly or partly to electromagnetic compatibility (EMC). They are applied when preparing new electromagnetic compatibility publications or EMC clauses, as well as when revising existing publications. NOTE The IEC Standardization Management Board (SMB) has decided that Guides such as this one can have mandatory requirements as well as guidance which may or may not be followed. The mandatory requirements in this Guide are identified by the use of “shall”. Guidance only is identified by statements using the verb “should”. These procedures are followed in order to ensure that the resulting publications are consistent with each other and current practice, and to avoid overlapping document scopes. This guide has been revised in order to align it with the second edition of IEC Guide 108,which states: “For safety and EMC standards the principles of this guide are addressed by the specific technical provisions of IEC Guides 104 and 107 respectively.” Technical committees should consult the documents listed in Clause 2 when preparing EMC publications or EMC clauses.
Electromagnetic compatibility - Guide to the drafting of electromagnetic compatibility publications
- ICS
- 33.100
- CCS
- 发布
- 2015-09-03
- 实施
本部分规定了蜂窝式移动通信用户设备及其辅助设备的电磁兼容性(EMC)要求，包括限值、性能判据和测量方法等。本部分适用于蜂窝式移动通信用户设备及其辅助设备。
Requirements and measurement methods of electromagnetic compatibility for cellular Mobile telecommunications equipment.Part 2: general requirements of user equipment and ancillary equipment
- ICS
- 33.100
- CCS
- M04
- 发布
- 2015-07-14
- 实施
- 2015-10-01
本部分规定了无线通信设备及其关联的辅助设备的电磁兼容性(EMC)限值、性能判据和测量方法等。本部分适用于除广播接收机以外所有种类的无线通信设备。对于不适合在实验室环境下测试的特定产品(如大功率无线电发信机)，可对设备进行现场测试。在这种情况下，如果没有适用的现场试验标准和方法，那么用于评估受试设备测量方法的基本原理和限值应与本部分的规定一致。
Requirements and measurement methods of electromagnetic compatibility for radio communication equipment.Part 1: Common technical requirements
- ICS
- 33.100
- CCS
- M04
- 发布
- 2015-07-14
- 实施
- 2015-10-01
本规范规定了防雷装置安全检测的项目、要求、方法、环境、周期、程序、数据判定和档案管理。 本规范适用于建筑物及其电气电子信息系统防雷装置的安全检测（以下简称检测）。
Technical specifications for safety testing of lightning protection devices
- ICS
- 33.100
- CCS
- M04
- 发布
- 2015-06-15
- 实施
- 2015-10-01
IEC 60940:2015 provides guidance applicable to information on application of capacitors, resistors, inductors, and complete filter units for electromagnetic interference suppression. This second edition cancels and replaces the first edition published in 1988. This second edition is a result of maintenance activities related to the previous edition. All changes that have been agreed upon can be categorized as minor revisions.
Guidance information on the application of capacitors, resistors, inductors and complete filter units for electromagnetic interference suppression
- ICS
- 33.100
- CCS
- 发布
- 2015-05-08
- 实施
- 2015-07-14 (7)
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard
- ICS
- 33.100
- CCS
- 发布
- 2015-02-18
- 实施
Medical electrical equipment - ALL PARTS
- ICS
- 33.100
- CCS
- 发布
- 2015-01-20
- 实施
Electromagnetic compatibility(EMC)－Part 6：Generic standards－ Section3：Emission standard for residential, commercial and light-industrial environments
- ICS
- 33.100
- CCS
- 发布
- 2014-12-31
- 实施
- 2014/12/31
Electromagnetic compatibility(EMC) — Part 3: Limits — Section 6: Assessment of emission limits for distorting loads in MV and HV power systems — Basic EMC publication
- ICS
- 33.100
- CCS
- 发布
- 2014-12-31
- 实施
- 2014/12/31
Information technology equipment — Immunity characteristics —technology equipment — Immunity characteristics —
- ICS
- 33.100
- CCS
- 发布
- 2014-12-31
- 实施
- 2014/12/31
Electromagnetic compatibility(EMC) — Part 3: Limits — Section 6: Assessment of emission limits for distorting loads in MV and HV power systems — Basic EMC publication
- ICS
- 33.100
- CCS
- 发布
- 2014-12-31
- 实施
This part of IEC 62236 applies to signalling and telecommunication apparatus which is installed in the railway environment. Signalling and telecommunication apparatus mounted in vehicles is covered by IEC 62236-3-2. This standard specifies limits for emission and immunity and provides performance criteria for signalling and telecommunications (S&T) apparatus which may interfere with other apparatus in the railway environment, or increase the total emissions for the railway environment beyond the limits defined in the appropriate standard and so risk causing Electro-Magnetic Interference (EMI) to apparatus outside the railway system. Apparatus which complies with the emission levels of IEC 61000-6-4 will meet the emission requirements of this standard provided that emissions from any d.c. power port are within the emissions limits specified for a.c. power ports. The immunity levels of IEC 61000-6-2 will also be adequate except for the special case of apparatus as defined in Note 1 of Table 1. This standard provides the immunity requirements for such apparatus. The immunity levels given for the apparatus will in most cases allow the apparatus to perform as intended in the railway environment (see Note). The immunity level establishes a common reference for evaluating the performance of the apparatus when subject to interference resulting from direct exposure of the apparatus and associated cables to a radio frequency field, or by coupling of the interference from a remote source. If a port is intended to transmit or receive for the purpose of radio communication (intentional radiators, e.g. transponder systems), then the emission and immunity limits in this standard at the communication frequency do not apply. The standard does not specify basic personal safety requirements for apparatus such as protection against electric shock, unsafe operation, insulation co-ordination and related dielectric tests. The requirements were developed for and are applicable to this set of apparatus when operating under normal conditions. Fault conditions of the apparatus have not been taken into account. The requirements and test methods also apply to telecommunications and signalling data and power lines connected to the equipment under test (EUT). The frequency range considered is from d.c. to 400 GHz. No measurements need to be performed at frequencies where no requirement is specified. For products in the scope of IEC 61000-3-2 or IEC 61000-3-3, the requirements of those standards apply. Testing methods are given in the basic standards listed in Clause 2. These specific provisions are to be used in conjunction with the general provisions in IEC 62236-1. NOTE The immunity and emission levels do not of themselves guarantee that the integration of apparatus will necessarily be satisfactory. The standard cannot cover all the possible configurations of the apparatus, but the test levels are sufficient to achieve satisfactory EMC in the majority of cases.
Railway applications - Electromagnetic compatibility - Part 4: Emission and immunity of the signalling and telecommunications apparatus
- ICS
- 33.100
- CCS
- 发布
- 2014-12-25
- 实施
