33.160.01 音频、视频和视听系统综合 标准查询与下载

SN/T 1603.1-2005 进出口音视频及类似电子设备检验规程 第1部分:通用要求

本部分规定了对进出口音视频设备的要求、检验及判定。 本部分适用于设计成由电网电源或电源设备供电的，预定用来分别接收、产生、录制或重放音频、视频和有关信号的电子设备，也适用于设计成专门与上述设备组合使用的设备（以下简称音视频设备）的进出口检验。 对于以上涉及的由非电网电源或电源设备供电的，内含激光系统或内部峰值工作电压大于4000V的设备，只要适用，均可采用本部分。

Rules for the inspection of audio, video and similar electronic apparatus for import and export--Part 1: General requirements

SN/T 1603.3-2005 进出口音视频及类似电子设备检验规程 第3部分:视频游戏机和音视频教学设备

本部分规定了进出口视频游戏机和音视频教学设备的要求、检验及判定。 本部分适用于设计成由电网电源或电源设备供电的家用和类似用途的视频游戏机和音视频教学设备的进出口检验。

Rules for the inspection of audio, video and similar electronic apparatus for import and export--Part 3: Video games and audio,video teaching equipment

DS/EN 302307 V.1.1.1:2005 数字视频广播（DVB）；用于广播、交互式服务、新闻采集和其他宽带卫星应用的第二代成帧结构、信道编码和调制系统

DVB-S (EN 300 421 [2]) was introduced as a standard in 1994 and DVB-DSNG (EN 301 210 [3]) in 1997. The DVB-S standard specifies QPSK modulation and concatenated convolutional and Reed-Solomon channel coding, and is now used by most satellite operators worldwide for television and data broadcasting services. DVB-DSNG specifies, in addition to DVB-S format, the use of 8PSK and 16QAM modulation for satellite news gathering and contribution services.

Digital Video Broadcasting (DVB); Second generation framing structure, channel coding and modulation systems for Broadcasting, Interactive Services, News Gathering and other broadband satellite applications

SJ 20931-2005 微波信号发生器通用规范

本规范规定了微波信号发生器的通用技术要求、测试与试验方法、质量保证规定和交货准备等。 本规范适用于各种通用微波信号发生器，是该类产品研制、生产和验收的主要技术依据，也是制定相关产品规范和其它技术文件应遵循的原则。 本规范所适用的微波信号发生器是产生正弦信号，频率范围部分或全部覆盖300MHz～30GHz（允许频率向此范围外延伸）并具有一种以上调制或组合调制（这些调制是幅度调制、频率调制、相位调制、脉冲调制）的信号发生器，亦适用于该频率范围的未调制信号发生器。

General specification for microwave signal generators

DS/EN 62300:2005 带塑料光纤的消费类音频/视频设备数字接口

This International Standard specifies the principal electrical and optical parameters for a consumer audio/video equipment digital interface that uses plastic optical fibre (POF). NOTE A description of the principal features of such an interface is given in Annex C.

Consumer audio/video equipment digital interface with plastic optical fibre

IEC TR 61305-6:2005 家用高保真音频设备和系统.测量和规范性能的方法.第6部分:扬声器的听音试验.单刺激额定值和成对比较

Applies to loudspeakers conforming to IEC 61305-5 and intended for home use to establish standards for comparison of the sound characteristics of various loudspeakers with each other. Two test procedures are described: single stimulus ratings; paired com

Household high-fidelity audio equipment and systems - Methods of measuring and specifying the performance - Part 6: Listening tests on loudspeakers - Single stimulus ratings and paired comparisons

GY/T 206-2005 采用多音信号对调频广播进行测量的方法

本标准规定了采用多音信号对调频广播进行测量的方法。对于能够确保同样测量不确定度的任何等效测量方法也可以采用。有争议时，应以本标准为准。 本标准适用于调频广播系统的测量，同时也适用于调频广播的质量评价。

Measurement of FM sound broadcasting using multi-tone signal

DS/EN 61603-2:2005 使用红外辐射传输音频和/或视频及相关信号 第2部分：音频宽带和相关信号的传输系统

This part of IEC 61603 gives methods for measuring and specifying those characteristics of wide band audio IR transmission systems not covered by part 1 of this standard (see also 3.1). It allows systems which make different economic use of the available bandwidth to be described in order that conclusions regarding interference and compatibility can be drawn. Interface (matching) values and other system characteristics are also covered. This part of IEC 61603 replaces chapter 1 of IEC 60764, which covers only two carrier frequencies for analogue audio signals, and which does not cover digital audio.

Transmission of audio and/or video and related signals using infra-red radiation - Part 2: Transmission systems for audio wide band and related signals

BS EN 61606-2:2004 音频和视听设备.数字音频部分.音频特性的基本测量方法.用户使用

This part of IEC 61606 deals with the basic measurement methods of the audio characteristics of the digital audio part of audio and audiovisual equipment for consumer use. The common measuring conditions and methods are described in IEC 61606-1. Specific conditions and methods of measurement for consumer equipment are given in this standard.

Audio and audiovisual equipment-Digital audio parts-Basic measurement methods of audio characteristics-Part 2:Consumer use

BS EN 61606-1:2004 音频和视听设备.数字音频部分.音频特性的基本测量方法.总则

This part of IEC 61606 deals with the basic methods of measurement of the audio characteristics of the digital audio part of audio and audiovisual equipment for both consumer and professional use. The common measuring conditions and methods, described in this standard, are used for the measurement of the performance characteristics of equipment having an audio bandwidth equal to approximately one-half of the sampling frequency of a system, where the audio information is processed in the form of digital data. CD players, DAT recorders, digital amplifiers, digital sound broadcast receivers and television broadcast receivers with digital sound are examples. Methods specified in this standard are not applicable to systems incorporating bit-rate reduced digital audio signals that have data loss. This standard describes tests for equipment which has digital input with analogue output and analogue input with digital output. Future revisions of this standard will cover digital-in/digital-out and analogue-in/analogue-out tests. This standard does not apply to power amplifiers. NOTE 1 A digital audio system having an analogue input and an analogue output with digital signal processing may have different characteristics from those of a pure analogue audio system due to sampling of the audio signal and performance of incorporated A/D and D/A converters. Measurement methods described in IEC 60268-3 may not give correct results when applied to a digital system. NOTE 2 The methods described are mostly based on sampling frequencies of 32 kHz and higher. NOTE 3 For tests of those systems of digital-in-digital-out, and analogue-in - analogue-out test, refer to AES 17. NOTE 4 This standard is planned to provide the industry with a harmonized set of methods of measurements for digital audia equipment as described in the first edition of IEC 61606 (1997), AES 17 and EIAJ CP-2150.

Audio and audiovisual equipment-Digital audio parts-Basic measurement methods of audio characteristics-Part 1:General

NF C97-250-7*NF EN 61883-7:2005 用户音频/视频设备.数字接口.第7部分:ITU-R BO.1294系统B的传输

Consumer audio/video equipment - Digital interface - Part 7 : transmission of ITU-R BO.1294 System B.

BS EN 62087:2003 音频、视频和相关设备的能耗测量方法

This International Standard specifies methods of measurement for the power consumption of TV receivers, VCRs, Set Top Boxes (STBs), audio equipment and multi-function equipment for consumer use. Moreover the different modes of operation which are relevant for the power consumption are defined. The methods of measurement are only applicable for equipment which can be connected to the mains. The measuring conditions in this standard represent the normal use of the equipment and may differ from specific conditions, for example as specified in safety standards.

Methods of measurement for the power consumption of audio, video and related equipment

BS EN 60958-1:2004 数字音频接口.总则

This part of IEC 60958 describes a serial, uni-directional, self-clocking interface for the interconnection of digital audio equipment for consumer and professional applications. It specifies the basic structure of the interface. Separate documents define items specific to particular applications. The interface is primarily intended to carry monophonic or stereophonic programmes, encoded using linear PCM and with a resolution of up to 24 bits per sample. When used for other purposes, the interface is able to carry audio data coded other than as linear PCM coded audio samples. Provision is also made to allow the interface to carry data related to computer software or signals coded using non-linear PCM. The format specification for these applications is not part of this standard. The interface is intended for operation at audio sampling frequencies of 32 kHz and above. Auxiliary information is transmitted along with the programme.

Digital audio interface - Part 1: General

NF C97-250-1:2005 用户音频/视频设备.数字接口.第1部分:总则

Consumer audio/video equipment - Digital interface - Part 1 : general.

UL 1492 BULLETINS-2005 CSDS 5/23/2005 (2p)

Covers audio and video products indended for use on supply circuits in accordance with ANSI/NFPA 70. These requirements where applicable cover: a) Audio products and accessories intended for household use and involved with the reproduction or processing of audio signals. b) Video products that are intended for household or commercial use and that receive signals in ways such as : off the air; through a CATV/MATV cable system; from a video-recorded medium; and from image-producing units. c) Auxilary products and accessories intended for use with audio or video produts wherein the auxiliary and accessories products are separate and do not perform the desired functionn, but are used in addition to or as a supplement to products d) Video products intended for entertainment purposes in ordinary locations of health-care facilities. e) Cellular telephones and similar transceiving devices used on a vehicle, boat , or the like where telephone interconnects to the telephone network through a radio transmitter and receiver.

CSDS 5/23/2005 (2p)

GOST R IEC 60065-2005 音频、视频及类似电子设备.安全性要求

Audio, video and similar electronic apparatus. Safety requirements

LST EN 61603-2-2002/A1-2004 使用红外辐射传输音频和/或视频及相关信号 第2部分：音频宽带和相关信号的传输系统（IEC 61603-2:1997/A1:2004）

Transmission of audio and/or video and related signals using infra-red radiation. Part 2: Transmission systems for audio wide band and related signals (IEC 61603-2:1997/A1:2004)

IEC 61883-3:2004 用户音频/视频设备.数字接口.第3部分:HD-DVCR数据传输

Specifies the packet format and the transmission timing for HD-DVCR data. It describes the specifications for the IEEE 1394 packet, the CIP header for 1125-60 and 1250-50 television systems, and the transmission timing.

Consumer audio/video equipment - Digital interface - Part 3: HD-DVCR data transmission

IEC 61883-5:2004 用户音频/视频接口.数字接口.第5部分:SDL-DVCR数据传输

Specifies the packet format and the transmission timing for SDL-DVCR data. It describes the specifications for the IEEE 1394 packet, the CIP header for SDL525-60 and SDL625-50 systems, and the transmission timing.

Consumer audio/video equipment - Digital interface - Part 5: SDL-DVCR data transmission

IEC 61883-2:2004 用户音频/视频设备.数字接口.第2部分:SD-DVCR数据传输

Specifies the packet format and the transmission timing for SD-DVCR data. It describes the specifications for the IEEE 1394 packet, the CIP header for 525-60 and 625-50 television systems, and the transmission timing.

Consumer audio/video equipment - Digital interface - Part 2: SD-DVCR data transmission