33.180.20 纤维光学和光学互连器件 标准查询与下载

IEC 61300-2-46:2019 RLV 纤维光学互连器件和无源元件基本试验和测量程序第2-46部分:试验湿热循环

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-46: Tests - Damp heat, cyclic

IEC 62148-21:2019 光纤有源元件和器件封装和接口标准第21部分:硅细间距球栅阵列（S-FBGA）和硅细间距陆栅阵列（S-FLGA）PIC封装电接口设计指南

This part of IEC 62148 covers the design guide of the electrical interface for photonic integrated circuit (PIC) packages using silicon fine-pitch ball grid array (S-FBGA) and silicon fine-pitch land grid array (S-FLGA). In this document@ the electrical interface for the S-FBGA package is informative. The purpose of this document is to specify adequately the electrical interface of PIC packages composed of optical transmitters and receivers that enable mechanical and electrical interchangeability of PIC packages

Fibre optic active components and devices – Package and interface standards – Part 21: Design guide of electrical interface of PIC packages using silicon fine-pitch ball grid array (S-FBGA) and silico

JIS C 5953-3:2019 光纤有源元件和器件 性能标准 第3部分：用于 40 Gbit/s 光纤传输系统的集成调制器的激光二极管发射器

Fiber optic active components and devices -- Performance standards -- Part 3: Modulator-integrated laser diode transmitters for 40 Gbit/s fiber optic transmission systems

JIS C 5910-1:2019 非波长选择光学分路器. 第1部分: 通用规格

Non-wavelength-selective fiber optic branching devices -- Part 1: Generic specification

BS EN IEC 60869-1:2018 光纤互连装置和无源元件 光纤无源功率控制装置 通用规格

What is BS EN IEC 60869 ‑ 1 - Fibre optic interconnecting devices and passive components about?    BS EN IEC 60869 is a series on fibre optic interconnecting devices and passive components. The passive optical device (component) controls a transmittance with a designed wavelength-independent transfer coefficient. BS EN IEC 60869 ‑ 1 applies to fibre optic passive power control devices. These have all the following general features:   They are passive in that they contain no optoelectronic or other transducing elements

Fibre optic interconnecting devices and passive components. Fibre optic passive power control devices. Generic specification

IEC 61300-2-4:2019 RLV 纤维光学互连器件和无源元件基本试验和测量程序第2-4部分:试验纤维或电缆保持力

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-4: Tests - Fibre or cable retention

IEC 61300-2-4:2019 纤维光学互连器件和无源元件基本试验和测量程序第2-4部分:试验纤维或电缆保持力

The purpose of this part of IEC 61300 is to ensure that the retention or attachment of the fibre@ cord or cable in a fibre optic device or an enclosure will withstand tensile loads likely to be applied during normal service.

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-4: Tests - Fibre or cable retention

YD/T 2000.2-2018 平面光波导集成光路器件 第2部分：基于阵列波导光栅（AWG)技术的密集波分复用（DWDM）滤波器

Planar optical waveguide integrated optical circuit device Part 2: Dense wavelength division multiplexing (DWDM) filter based on arrayed waveguide grating (AWG) technology

YD/T 1272.1-2018 光纤活动连接器 第1部分：LC型

本部分规定了 LC 型光纤活动连接器(以下简称连接器) 的术语和定义、分类、各类接口的图形、 配合尺寸、端面、光學性能、材料和環保符合性的要求、试验方法及质量评定程序、标志、包装、运输 及贮存要求。 本部分适用于 LC 型光纤活动连接器产品。

Optical fiber connector Part 1:type LC

BS EN IEC 62005-9-4:2018 光纤互连装置和无源元件 可靠性 无源光学元件的高功率认证 符合 C 类环境

What is BS EN IEC 62005 ‑ 9 ‑ 4 - Fibre optic interconnecting devices and passive components about?    BS EN IEC 62005 is a series of fibre optic interconnecting devices and passive components. Fibre optic passive components establish a  point-to-multipoint, fibre to the premises (FTTP) network architecture in which unpowered optical splitters are used to enable a single optical fibre to serve multiple premises. BS EN IEC 62005 ‑ 9 ‑ 4 gives the requirements for the reliability qualification of passive optical components when used in high optical power applications for the environm...

Fibre optic interconnecting devices and passive components. Reliability - High power qualification of passive optical components for environmental category C

IEC 60869-1:2018 光纤互连设备和无源元件 - 光纤无源电力控制设备 - 第1部分:通用规范

Fibre optic interconnecting devices and passive components - Fibre optic passive power control devices - Part 1: Generic specification

IEC 60869-1:2018 RLV 纤维光学互连器件和无源元件.纤维光学无源功率控制器件.第1部分:总规范

Fibre optic interconnecting devices and passive components - Fibre optic passive power control devices - Part 1: Generic specification

EN IEC 61753-1:2018 光纤互连设备和无源元件 性能标准 第1部分：总则和指南

NEW! IEC 61753-1:2018 is available as IEC 61753-1:2018 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61753-1:2018 provides guidance for the drafting of performance standards for all passive fibre optic products. This document defines the tests and severities which form the performance categories or general operating service environments and identifies those tests which are considered to be product specific. Test and severity details are given in Annex A. This second edition cancels and replaces the first edition published in 2007. It constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) definitions updated with new products: wall outlets, wall or pole mounted boxes, splices, ODF modules, street cabinets, hardened connectors and field mountable connectors; b) categories U and O are replaced by categories OP and OP+. No mandatory sequence in category OP+. Category OP+ contains the tests from category OP with the addition of only 4 other tests; c) addition of Category I (Industrial); d) temperature ranges added (with the HD suffix to the categories C, OP, OP+ and I) in case passive optical components are placed in a housing together with active electronics (HD stands for “heat dissipation”); e) the height of category A changed from 3 m to ground level (0 m); f) the lower level height of category G environment changed from ground level (0 m) to –1 m below ground level. Upper level remains at 3 m above ground level; g) addition of performance tests, test severities and performance criteria for new products: Wall outlet, wall or pole mounted boxes, mechanical splices, fusion splice protectors, ODF modules, street cabinets, field mountable connectors and hardened optical connectors; h) test severity of "Mating durability" test for connectors in categories C, OP ,OP+ and I is reduced to 200 cycles for connectors with cylindrical ferrules and 50 cycles for connectors with rectangular ferrules; i) test severity of "Change of temperature" test for connectors and passive optical components in category I is reduced from 20 cycles to 12 cycles (harmonized with connectors and components from other categories); j) test severity of "Flexing of strain relief" test for connectors in categories C, OP and OP+ is reduced to 50 cycles; k) test severities of "Assembly and disassembly of fibre optic mechanical splices, fibre management systems and closures" test for all enclosures is reduced to 5 cycles; l) test severities of "Change of temperature" test for all protective housings in categories C, A, G and S is reduced from 20 cycles to 12 cycles (harmonized with connectors and components); m) test severities of "Resistance to solvents and contaminating fluids" test for closures in categories G and S changed – kerosene is removed, diesel oil exposure reduced to 1 h immersion and 24 h drying at room temperature; n) sealing performance criteria of sealed closures for categories G and A are reduced to 20 kPa overpressure. o) the change in attenuation criterion for connectors has changed from peak-to-peak into a +/- deviation from the original value of the transmitted power at the start of the test (harmonized with the change in attenuation criterion

Fibre optic interconnecting devices and passive components - Performance standard - Part 1: General and guidance

JIS C 5985 AMD 1:2018 F16 型光纤电缆连接器（SC-SR 型连接器）（修正案 1）

F16 Type connectors for optical fiber cables (Type SC-SR connector) (Amendment 1)

JIS C 5986 AMD 1:2018 F17 型光纤电缆连接器（MU-SR 型连接器）（修正案 1）

F17 Type connectors for optical fiber cables (Type MU-SR connector) (Amendment 1)

BS EN IEC 61755-6-2:2018 光纤互连设备和无源元件 连接器光学接口 芯径为50$Gmm的多模物理接触光纤的连接 无角度参考连接器应用，波长为850nm，使用选定的A1

Fibre optic interconnecting devices and passive components. Connector optical interfaces. Connection of 50 $Gmm core diameter multimode physically contacting fibres. Non-angled for reference connector application, at wavelength of 850 nm using selected A1

BS EN IEC 63032:2018 光纤互连设备和无源元件 光纤可调谐带通滤波器 通用规范

Fibre optic interconnecting devices and passive components. Fibre optic tuneable bandpass filters. Generic specification

IEC 61753-1:2018 RLV 纤维光学互连器件和无源元件.性能标准.第1部分:总则和指南

Fibre optic interconnecting devices and passive components - Performance standard - Part 1: General and guidance

IEC 61753-1:2018 纤维光学互连器件和无源元件性能标准第1部分:总则和导则

This part of IEC 61753 provides guidance for the drafting of performance standards for all passive fibre optic products. This document defines the tests and severities which form the performance categories or general operating service environments and identifies those tests which are considered to be product specific. Test and severity details are given in Annex A.

Fibre optic interconnecting devices and passive components - Performance standard - Part 1: General and guidance

EN IEC 61755-6-2:2018 光纤互连器件和无源元件 连接器光学接口 第 6-2 部分：50 μm 芯径多模物理接触光纤的连接 非角度参考连接器应用 在 850 nm 波长使用 s

Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 6-2: Connection of 50 �� core diameter multimode physically contacting fibres - Nonangled for reference connector application@ at wavelength of 850 nm using s