共找到 248 条与 道路车辆装置 相关的标准,共 17 页
Test specification for energy measuring instruments of passenger cars in operation
Permanent magnet synchronous drive motor system for electric vehicles
Technical conditions for pre-coated adhesive coatings on threaded fasteners Part 2: Polyamide locking coating
Hexagonal flange bearing toothed bolts for automobiles
External hexagonal flange bolts for automobiles
Technical conditions for pre-coated adhesive layers on threaded fasteners Part 1: Microcapsule locking layer
Asynchronous drive motor system for electric vehicles
本标准规定了汽车贴膜玻璃的术语和定义、分类、施工、要求、试验方法、检验规则和标志。 本标准适用于在既有汽车的玻璃上贴膜形成的贴膜玻璃及其施工过程。本标准不适用于防护外力破坏型的贴膜玻璃。
Technical requirements for film mounted motor vehicle glass
Electric Vehicle Charging (Swapping) Data Acquisition Specification and Application Layer Protocol Part 1: General Requirements
本标准规定了纯电动乘用车用减速器总成的基本参数、要求、试验方法、检验规则和标志、包装、运输、储存。本标准适用于纯电动乘用车用齿轮减速器总成(以下简称减速器)。
Technical specification for reduction gearbox of battery electric passenger cars
本标准规定了电动汽车用动力蓄电池系统的通用要求。本标准适用于电动汽车用的动力蓄电池系统。
General requirement of traction battery system for electric vehicles
本标准规定了汽车信号闪光器的要求、试验方法、检验规则等。本标准适用于M、N类汽车用信号闪光器(以下简称闪光器)。其他机动车可参照执行。
Automotive signal flasher
本标准规定了上海市公交客车的分级、分类、技术要求、车辆技术性能质量保证指标、新车型批量投放条件、返厂及限制投放条件和等级评定规则。 本标准适用于上海市行政区域范围内的公交客车新车。
General Technical Requirements for Buses
本标准规定了油箱通风用过滤器的术语和定义、技术要求、试验方法和检验规则以及标志、包装、运输和储存。 本标准适用于体积流量不大于6000 L/min的汽车液压油箱通风用过滤器(以下简称过滤器),其他型式的油箱通风用过滤器可参照执行。
Specifications of tank ventilation filters
本标准规定了建筑垃圾车的术语和定义、整车技术要求、在用车辆技术要求、装卸运输管理、检验检测、检验方法及试验方法等。 本标准适用于最大总质量不大于31000Kg,符合GB/T 15089-2001中的N2、N3类车辆,并用于建筑垃圾的收集及运输。
Construction garbage truck technology and transportation management requirements
本部分规定了空气滤清器用非织造布(以下简称滤布)的分类、要求、测试方法、检验规则、标志、包装、运输和储存。 本部分适用于空气滤清器用非织造布。
Performance requirements and test methods of non-woven on automotive filter.Part 2:Non-woven of filters for air filter
本标准规定了汽车机械式变速器总成清洁度检测的方法。本标准适用于汽车机械式变速器总成(以下简称“变速器总成”)清洁度检测。
Measuring method of cleanliness of automobile manual transmission assembly
本标准规定了汽车变速器齿轮使用激光焊接和电子束焊接的工艺要求、方法及检验规则。本标准适用于批量生产汽车变速器齿轮的激光焊接和电子束焊接,其他焊接工艺可参照执行。
The specification of laser and electron beam welding for automobile transmission gear
本标准规定了橡胶堵塞的型式与尺寸、技术条件。本标准适用于车身薄壁圆孔规格d为12mm~55mm的汽车用A型橡胶堵塞。本标准适用于车身薄壁矩形孔规格为8mm × 14mm~25mm × 31mm的汽车用B型橡胶堵塞。
Rubber plugs
本标准规定了法兰连接器的型式与尺寸、技术条件和试验方法。本标准适用于规格范围D为60mm~201mm的汽车用法兰连接器。
Flange coupling connectors
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号