43.040.20 照明、信号和警告设备 标准查询与下载

SANS 20008:2004 关于批准发射非对称近光或远光或两者兼有装有卤素灯（H1，H2，H3，HB3，HB4和/或H7）的机动车前照灯的统一规定

Applies to the motor vehicle headlamps which may incorporate lenses of glass or plastic material.

Uniform provisions concerning the approval of motor vehicle headlamps emitting an asymmetrical passing beam or a driving beam or both and equipped with halogen filament lamps (H1, H2, H3, HB3, HB4, H7, H8, H9, HIR1, HIR2 and/or H11)

DS/ISO 15623:2004 运输信息和控制系统 前方车辆碰撞警告系统 性能要求和测试程序

This standard specifies system requirements and test procedures for systems capable of warning the driver of short inter-vehicle distance and closing speed which may cause a rear-end collision with other vehicles, including motor cycles, ahead of the subject vehicle while it is operating at ordinary speed. This standard is applicable to operations on roads with curve radii over 125 m as well as higher radius curves.

Transport information and control systems - Forward vehicle collision warning systems - Performance requirements and test procedures

SAE J2498-2004 应急车辆用警告灯系统的最低性能

This SAE Recommended Practice provides test procedures, requirements, and guidelines for the system of optical warning devices used on emergency vehicles.

Minimum Performance of the Warning Light System Used on Emergency Vehicles

BS ISO 6969:2004 道路车辆.声音信号设备.车辆安装后的试验

This International Standard specifies the testing of sound signalling devices in accordance with ISO 512, to be carried out after mounting on the vehicle.

Road vehicles. Sound signalling devices. Tests after mounting on vehicle

ISO 6969:2004 道路车辆.音响信号装置.装车后的试验

This International Standard specifies the testing of sound signalling devices in accordance with ISO 512, to be carried out after mounting on the vehicle.

Road vehicles - Sound signalling devices - Tests after mounting on vehicle

KS R 5070-2004(2009) 反向光开关用于汽车

Back-up lamp switches for automobiles

KS R 5064-2004(2009) 汽车头灯测试仪

Head light testers for autombiles

SAE J760-2004 通用密封照明装置的尺寸规格

This SAE Recommended Practice provides dimensional specifications for general service sealed lighting units, intended for use in such applications as motorcycle headlamps, military headlamps, industrial machinery headlamps, fog lamps, spot lamps, etc. See Figures 1 and 2 and Tables 1 and 2.

Dimensional Specifications for General Service Sealed Lighting Units

IEC 60809:1995/AMD3:2004 修改件3.道路车辆用灯具.尺寸、电气和发光要求

Amendment 3 - Lamps for road vehicles - Dimensional, electrical and luminous requirements

SAE J572-2004 建筑物及工业机器用密封的照明设备的要求

This SAE Standard applies to 145 mm nominal headlamp and floodlamp units.To define the dimensional requirements for sealed lighting units and assure their interchangeability.

Requirements for Sealed Lighting Unit for Construction and Industrial Machines

LST 1299-2004 特殊服务车辆 着色、显着标记、特殊灯光和声音信号 技术要求

Special service vehicles. Colouring, distinctive marks, special light and sound signals. Technical requirements

SANS 1329-1:2004 道路车辆用回复反射和荧光警示标志．第1部分：三角形

Covers requirements for two types of triangles that are retro-reflective and fluorescent and are intended to be carried in motor vehicles operating on public roads.

Retro-reflective and fluorescent warning signs for road vehicles Part 1: Triangles

SANS 1329-2:2004 道路车辆用回复反射和荧光警示标志．第2部分：不规则荷载机动车标志

Covers requirements for abnormal load signs that are retro-reflective and fluorescent, and that are intended for use on motor vehicles operating on public roads.

Retro-reflective and fluorescent warning signs for road vehicles Part 2: Abnormal load vehicle signs

JIS D 5711:2004 机动车用红色闪光信号灯

この規格は，自動車の使用時に，非常信号用具として用いる緊急保安炎筒(以下，保安炎筒という。)について規定する。

Red Fusee for Motor Vehicles

DLA MS51318 REV B VALID NOTICE 2-2004 24伏防水灯火管制前灯

MS51318B remains inactive for new design, however, the document is valid for use.

HEADLIGHT, BLACKOUT, 24-VOLT WATERPROOF

DLA MS51303 REV B VALID NOTICE 3-2004 清除黑色标记灯

The activities above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http://assist.daps.dla.mil.

LIGHT, MARKER, CLEARANCE-BLACK

UL 234 BULLETINS-2004

This bulletin contains substantive changes to UL 234 based on comments received to the ballot of the proposed Fifth Edition, bulletin dated March 19, 2004.

03/19/2004 (38p)

GOST R 41.48-2004 关于审核车辆照明装置和灯光信号装置安装情况的统一规定

Uniform provisions concerning the approval of vehicles with regard to the installation of lighting and light-signalling devices

IEC 60809:2004 道路车辆用灯.尺寸、电及光的要求

This International Standard is applicable to replaceable lamps (filament lamps and discharge lamps) to be used in headlamps, fog-lamps and signalling lamps for road vehicles. It is especially applicable to those lamps which are the subject of legislation. In particular, it includes the lamps contained in Regulationsl) No.37 and No.99 of the Geneva Agreement of 20 March 1958 of the United Nations Economic Commission for Europe (ECE). However, the standard may be used for other lamps falling under the scope of this standard. The standard specifies the technical requirements with methods of tests and basic interchangeability (dimensional, electrical and luminous) for lamps of normal production and for standard (étalon) lamps. For most of the requirements given in this standard reference is made to the "relevant data sheet". For all lamps listed in Clause 5 , data sheets are contained in this standard. For other lamps the relevant data are supplied by the lamp manufacturer or responsible vendor. It could be based on national legislation. Other requirements such as lamp life, lumen maintenance, torsion strength and resistance to vibration and shock are specified in IEC 60810. The latter standard also gives information for guidance of lighting equipment design, such as temperature limits and maximum lamp outlines. Road vehicle lamps for supplementary purposes which are not the subject of legislation are specified in IEC 60983. In countries which legislate for approval, for example under the terms of the aforementioned ECE Regulations, it is suggested that reference is made to this standard for assessment of compliance. IEC 60810 and IEC 60983 are not intended for that purpose.

Lamps for road vehicles - Dimensional, electrical and luminous requirements

KS R 5018-2003(2008) 汽车零部件照明和光信号装置

Automobiles parts－Lighting and light signalling devices