43.100 乘用车、篷车和轻型挂车 标准查询与下载
共找到 388 条与 乘用车、篷车和轻型挂车 相关的标准，共 26 页
Road vehicles — Passenger-car and trailer combinations — Lateral stability test
- ICS
- 43.100
- CCS
- 发布
- 20191008
- 实施
- 20191008
Passenger cars — Free-steer behaviour — Part 1: Steering Passenger cars — Free-steer behaviour — Part 1: Steeringrelease
- ICS
- 43.100
- CCS
- 发布
- 20191008
- 实施
- 20191008
Passenger cars — Verification of driver's direct field of view — Part 1: Vehicle positioning for static measurement
- ICS
- 43.100
- CCS
- 发布
- 20191008
- 实施
- 20191008
Passenger cars — Verification of driver's direct field of view — Part 2: Test method
- ICS
- 43.100
- CCS
- 发布
- 20191008
- 实施
- 20191008
Vehicle Emergency Alarm System Part 2: Technical Requirements and Test Methods for Vehicle Emergency Rescue Platform
- ICS
- 43.100
- CCS
- T47
- 发布
- 2019-09-18
- 实施
- 2020-01-01
Vehicle Emergency Alarm System Part 1: Requirements and Overall Architecture
- ICS
- 43.100
- CCS
- T47
- 发布
- 2019-09-18
- 实施
- 2020-01-01
1 Scope This document specifies the general conditions that apply when vehicle dynamics properties are determined according to ISO test methods. In particular, it specifies general conditions for: — variables; — measuring equipment and data processing; — environment (test track and wind velocity); — test vehicle preparation (tuning and loading); — initial driving; and — test reports (general data and test conditions). These items are of general significance, regardless of the specific vehicle dynamics test method. They apply when vehicle dynamics properties are determined, unless other conditions are required by the standard which is actually used for the test method. This document is applicable to passenger cars as defined in ISO 3833 and light trucks. NOTE The general conditions defined in existing vehicle dynamics standards are valid until a reference to this document is included. This document is cited in many other standards without a dated reference. In the course of its revision, no chan...
Road vehicles. Vehicle dynamics test methods - General conditions for passenger cars
- ICS
- 43.100
- CCS
- 发布
- 2019-08-31
- 实施
- 2019-08-31
Measuring method of automobile exterior dimensions
- ICS
- 43.100
- CCS
- 发布
- 20190730
- 实施
- 20190730
Evaluation of exterior protrusion of passenger cars
- ICS
- 43.100
- CCS
- 发布
- 20190730
- 实施
- 20190730
Technical requirements for the operation of pure electric taxi passenger cars
- ICS
- 43.100
- CCS
- T41
- 发布
- 2019-06-17
- 实施
- 2020-01-01
What is BS ISO 7975 - Braking in a turn-Open-loop test method about? ISO 7975 specifies an open-loop test procedure to examine the effect of braking on course holding and directional behavior of a vehicle. Specifically, the method determines how the steady-state circular response of a vehicle is altered by a braking action only. ISO 7975 is applicable to passenger cars as defined in ISO 3833 and to light trucks. Who is ISO 7975 - Braking in a turn-Open-loop test method for? ISO 7975 on Passenger cars — Braking in a turn — Open-loop test method is applicable to: Passenger cars manufacturers
Passenger cars. Braking in a turn. Open-loop test method
- ICS
- 43.100
- CCS
- 发布
- 2019-04-30
- 实施
- 2019-04-30
This document specifies an open-loop test procedure to examine the effect of braking on course holding and directional behaviour of a vehicle. Specifically, the method determines how the steady-state circular response of a vehicle is altered by a braking action only. This document is applicable to passenger cars as defined in ISO 3833 and to light trucks. The open-loop manoeuvre specified in this test method is not representative of real driving conditions but is useful to obtain measures of vehicle braking behaviour resulting from control inputs under closely controlled test conditions.
Passenger cars — Braking in a turn — Open-loop test method
- ICS
- 43.100
- CCS
- 发布
- 2019-04-16
- 实施
This document specifies the general conditions that apply when vehicle dynamics properties are determined according to ISO test methods. In particular, it specifies general conditions for: — variables; — measuring equipment and data processing; — environment (test track and wind velocity); — test vehicle preparation (tuning and loading); — initial driving; and — test reports (general data and test conditions). These items are of general significance, regardless of the specific vehicle dynamics test method. They apply when vehicle dynamics properties are determined, unless other conditions are required by the standard which is actually used for the test method. This document is applicable to passenger cars as defined in ISO 3833 and light trucks. NOTE The general conditions defined in existing vehicle dynamics standards are valid until a reference to this document is included. This document is cited in many other standards without a dated reference. In the course of its revision, no change in the numbering of clauses, tables and figures is anticipated.
Road vehicles — Vehicle dynamics test methods — Part 1: General conditions for passenger cars
- ICS
- 43.100
- CCS
- 发布
- 2019-01-10
- 实施
- 0000-00-00
Passenger cars — Validation of vehicle dynamic simulation — Lateral transient response test methods
- ICS
- 43.100
- CCS
- 发布
- 2018-12-28
- 实施
Passenger cars — Validation of vehicle dynamic simulation — Lateral transient response test methods
- ICS
- 43.100
- CCS
- 发布
- 2018-12-28
- 实施
Passenger cars — Validation of vehicle dynamic simulation — Sine with dwell stability control testing
- ICS
- 43.100
- CCS
- 发布
- 2018-12-26
- 实施
Passenger cars — Vehicle dynamic simulation and validation — Steady-state circular driving behaviour
- ICS
- 43.100
- CCS
- 发布
- 2018-12-26
- 实施
Passenger cars — Validation of vehicle dynamic simulation — Sine with dwell stability control testing
- ICS
- 43.100
- CCS
- 发布
- 2018-12-26
- 实施
Passenger cars — Validation of vehicle dynamic simulation — Sine with dwell stability control testing
- ICS
- 43.100
- CCS
- 发布
- 2018-12-26
- 实施
