45.060 铁路车辆 标准查询与下载
共找到 499 条与 铁路车辆 相关的标准，共 34 页
IEC 62864-1:2016 applies to series hybrid systems (electrically connected) with onboard energy storage (hereinafter referred as hybrid system). This standard specifies the following basic requirements, characteristics, functions and test methods for hybrid systems: - energy management to control the power flow among primary power source, energy storage system and power converters; - energy consumption, energy efficiency and regenerated energy; - vehicle characteristics achieved by energy storage system; - test methods of combined test; and - test methods of completed vehicles based on factory (stationary) and field (running) tests.
Railway applications - Rolling stock - Power supply with onboard energy storage system - Part 1: Series hybrid system
- ICS
- 45.060
- CCS
- 发布
- 2016-11-04
- 实施
- 2017-02-04 (7)
This International Standard specifies the functional requirements for output and accuracy of measurements of the dynamic interaction between pantograph and overhead contact line.
Railway applications - Current collection systems - Requirements for and validation of measurements of the dynamic interaction between pantograph and overhead contact line
- ICS
- 45.060
- CCS
- 发布
- 2016-10-04
- 实施
- 2016-10-06
Railway vehicle air storage cylinder
- ICS
- 45.060
- CCS
- S34
- 发布
- 2016-09-30
- 实施
- 2017-04-01
本标准规定了铆接的一般技术要求、检查方法和验收规则。 本标准适用于铁路车辆新造和修理的铆接结构(不包括压力容器)。
General technical conditions for riveting of railway vehicles
- ICS
- 45.060
- CCS
- S30
- 发布
- 2016-09-30
- 实施
- 2017-04-01
Measuring instrument for rolling stock coupler buffer device Type 13 coupler maintenance measuring instrument
- ICS
- 45.060
- CCS
- S31
- 发布
- 2016-09-30
- 实施
- 2017-04-01
EMU front-end opening and closing mechanism
- ICS
- 45.060
- CCS
- S31
- 发布
- 2016-09-30
- 实施
- 2017-04-01
Measuring instruments for rolling stock coupler buffer devices Type 16 and Type 17 coupler maintenance measuring instruments
- ICS
- 45.060
- CCS
- S31
- 发布
- 2016-09-30
- 实施
- 2017-04-01
IEC 62718:2013 specifies the performance and constructional requirements, and associated tests, for d.c. supplied electronic ballasts used to supply fluorescent lamps for lighting on railway rolling stock. Its requirements replace those of IEC 61347 for all railway rolling stock applications and specify and complete those of IEC 61347 for the specific needs of railway rolling stock applications. The contents of the corrigendum of February 2016 have been included in this copy.
Railway applications - Rolling stock - DC supplied electronic ballasts for lighting fluorescent lamps
- ICS
- 45.060
- CCS
- 发布
- 2016-09-27
- 实施
IEC 62128-3:2013 specifies requirements for the protective provisions relating to electrical safety in fixed installations, when it is reasonably likely that hazardous voltages or currents will arise for people or equipment, as a result of the mutual interaction of a.c. and d.c. electric traction systems. It also applies to all aspects of fixed installations that are necessary to ensure electrical safety during maintenance work within electric traction systems. This standard applies to all new lines, extensions and to all major revisions to existing lines.
Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 3: Mutual interaction of a.c. and d.c. traction systems
- ICS
- 45.060
- CCS
- 发布
- 2016-09-27
- 实施
Offers a set of rules that are applied in the design and manufacture of electrical installations and equipment to be used on rolling stock so as to protect the persons from electric shocks. Applicable to vehicles of rail transport systems, trolley buses, magnetic levitated vehicles ant to the electrical equipment installed in these vehicles.
Railway applications - Rolling stock - Protective provisions against electrical hazards
- ICS
- 45.060
- CCS
- 发布
- 2016-09-27
- 实施
IEC TS 62773:2014 establishes a procedure to be used by rail transport authorities and/or radio suppliers to determine the appropriate performance requirements of radio system for a radio-based train control system, consistent with their specific business needs and existing conditions: the Technical Specification itself consists in defining a procedure linking preconditions to some radio parameters. Then, the appropriate performance requirements are deduced by the user of the Technical Specification from the radio parameters.
Railway applications - Procedure to determine the performance requirements for radio systems applied to radio-based train control systems
- ICS
- 45.060
- CCS
- 发布
- 2016-09-27
- 实施
IEC 60850:2014 specifies the main characteristics of the supply voltages of traction systems, such as traction fixed installations, including auxiliary devices fed by the contact line, and rolling stock, for use in the following applications: - railways; - guided mass transport systems such as tramways, light trains, elevated and underground railways and trolleybus systems; - rail bound material transportation systems, e.g. for coal or iron-ore. This standard is also applicable for low speed maglev trains or linear motor transport systems. This new edition includes the following significant technical changes with respect to the previous edition: - some definitions in Clause 3 clarified; - Subclause 4.1 completed; - Table 1 modified; - Annex B modified with new Table B.1.
Railway applications - Supply voltages of traction systems
- ICS
- 45.060
- CCS
- 发布
- 2016-09-27
- 实施
IEC 62625-2:2016 covers the standardized test methods for verifying the compliance of an On board Driving Data Recording System implementation with the requirements specified by IEC 62625-1. It also covers the conformity testing criteria for designed and manufactured ODDRS. This part of IEC 62625 includes the list of the requirements specified by IEC 62625-1 and the relevant acceptance conditions for ODDRS at design review, type test and routine test phases. For the train level design review and train level test phases, this part provides guidelines for the conformity testing methods to be applied to the ODDRS installed on the train.
Electronic railway equipment - On board driving data recording system - Part 2: Conformity testing
- ICS
- 45.060
- CCS
- 发布
- 2016-09-09
- 实施
- 2016-12-09 (7)
This part of IEC 62848 applies to non-linear metal-oxide surge arresters without gaps for both on board and fixed installations@ designed to limit voltage surges on DC systems specified in IEC 60850 with nominal voltage up to 3 kV.
Railway applications - DC surge arresters and voltage limiting devices - Part 1: Metal-oxide surge arresters without gaps
- ICS
- 45.060
- CCS
- 发布
- 2016-06-15
- 实施
- 2016-06-18
This part of IEC 62864 applies to series hybrid systems (electrically connected) with onboard energy storage (hereinafter referred as hybrid system). A hybrid system has two (or more) power sources including energy storage system (ESS) on board to achieve the following features by combining converter and motors and performing energy management control: ? improving energy and fuel efficiency@ improving acceleration characteristics@ increasing running distance and uninterrupted running in the event of the loss of the primary power source (PPS)@ by using an ESS in addition to the primary power source under conditions where the power and capacity of the power source including regenerative power are limited@ thus alleviating those limitations; ? reducing fuel consumption@ reducing emissions (e.g. CO2@ NOx@ PM@ etc.); ? reducing environmental impact (e.g. visible obstruction@ noise@ etc.). By extension@ systems that have only onboard ESS@ without other PPSs@ is also considered in this standard. This standard intends to specify the following basic requirements@ characteristics@ functions and test methods for hybrid systems: ? energy management to control the power flow among primary power source@ energy storage system and power converters; ? energy consumption@ energy efficiency and regenerated energy; ? vehicle characteristics achieved by energy storage system; ? test methods of combined test; and ? test methods of completed vehicles based on factory (stationary) and field (running) tests. NOTE Converter in this standard means combined equipment consisting of one or more converters (e.g. rectifier@ inverter@ chopper@ etc.). The interfaces between the following power sources are covered: ? external electric power supply system; ? onboard ESSs (including pure onboard energy storage); ? fuel cell@ diesel electric generator; and ? other power sources. As for the combination of inverters and motors@ this standard applies to asynchronous motors or synchronous motors that are powered via voltage-source inverters. Power source systems and combination of inverters and motors are not limited to the listed above@ but this standard can also be applied to future systems. This part of IEC 62864 covers electrically connected systems (series hybrid)@ and not systems that mechanically transmit the driving force (parallel hybrid).
Railway applications - Rolling stock - Power supply with onboard energy storage system - Part 1: Series hybrid system
- ICS
- 45.060
- CCS
- 发布
- 2016-06-15
- 实施
- 2016-06-18
Electronic railway equipment - On-board multimedia and telematic subsystems for railways - Part 2: Video surveillance/CCTV services
- ICS
- 45.060
- CCS
- 发布
- 2016-06-07
- 实施
Locomotive average hose connector
- ICS
- 45.060
- CCS
- S32
- 发布
- 2016-05-26
- 实施
- 2016-12-01
IEC 62718:2013 specifies the performance and constructional requirements, and associated tests, for d.c. supplied electronic ballasts used to supply fluorescent lamps for lighting on railway rolling stock. Its requirements replace those of IEC 61347 for all railway rolling stock applications and specify and complete those of IEC 61347 for the specific needs of railway rolling stock applications.
Railway applications - Rolling stock - DC supplied electronic ballasts for lighting fluorescent lamps
- ICS
- 45.060
- CCS
- 发布
- 2016-04-08
- 实施
- 2015-07-08 (7)
Railway applications - Traction transformers and inductors on board rolling Stock
- ICS
- 45.060
- CCS
- 发布
- 2016-04-01
- 实施
Railway applications - Rolling stock - Combined test method for traction Systems
- ICS
- 45.060
- CCS
- 发布
- 2016-04-01
- 实施
