45.060.10 机车 标准查询与下载



共找到 471 条与 机车 相关的标准,共 32

This European Standard is applicable to railway vehicle driving cabs which are air-conditioned or heated/ventilated. These include:  locomotives;  mainline, suburban and regional vehicles;  urban vehicles such as metros and trams. This European Standard does not consider the special operational requirements of shunt locomotives. This European Standard specifies the comfort parameters for the driving cab to ensure driver comfort which helps safe operation. The conditions under which the physical parameters mentioned in this European Standard shall be measured are defined in EN 14813-2.

Railway applications - Air conditioning for driving cabs - Comfort parameters

ICS
45.060.10
CCS
S30
发布
2006-08-31
实施
2006-08-31

Railway applications. Air conditioning for driving cabs. Type tests

ICS
45.060.10
CCS
S35
发布
2006-08-31
实施
2006-08-31

本部分规定了机车、动车用往复活塞空气压缩机的技术要求、试验方法、检验规则、标志、包装和贮存。 本部分适用于机车、动车用风冷、两极、额定排气压力不超过1000kPa的空压机。 本部分也适用于公务机车、工矿机车、城轨车辆用空压机。

Technical specification for air compressor on locomotive and power car Part 2: Screw air compressor

ICS
45.060.10
CCS
S40
发布
2006-08-19
实施
2006-01-01

本标准规定了内燃机车用铜散热器(以下简称散热器)的技术要求、试验方法、检验规则以及标志、包装、运输和贮存等要求。 本标准适用于国产内燃机车用新造管片式和管带式结构的单、双流道散热器。内燃动车用新造散热器也参照本标准执行。

Copper radiator for diesel locomotive

ICS
45.060.10
CCS
S42
发布
2006-08-07
实施
2007-01-01

本标准规定了内燃机车用冷却液技术要求、冷却系统添加剂产品供货及验收指标、冷却液质量控制指标、配制冷却液用水指标和冷却系统添加剂产品的防腐蚀性能、阻垢性能测定方法。 本标准适用于使用防腐蚀、阻垢添加剂(3号、4号配方)冷却液的内燃机车。

Diesel locomotive coolant

ICS
45.060.10
CCS
S42
发布
2006-08-07
实施
2007-01-01

本标准规定了内燃机车柴油机用增压空气中间冷却器(以下简称中冷器)的技术要求、试验方法、检验规则以及标志、包装、运输、贮存等要求。 本标准适用于内燃机车柴油机用新造中冷器。内燃动车柴油机及发电机组柴油机用新造中冷却器也可参照本标准执行。

Intercooler for diesel locomotive

ICS
45.060.10
CCS
S42
发布
2006-08-07
实施
2007-01-01

This European Standard is applicable to railway vehicle driving cabs which are air-conditioned or heated/ventilated. These include: locomotives; mainline, suburban or regional vehicles; urban vehicles such as metros and trams.This European Standard does not consider the special operational requirements of shunt locomotives.This European Standard specifies the comfort parameter measurement methods for driving cabs. The comfort parameters and their tolerances cited inThis European Standard are defined in EN 14813-1.

Railway applications - Air conditioning for driving cabs - Part 2: Type tests (Incorporates Amendment A1: 2010)

ICS
45.060.10
CCS
发布
2006-08-01
实施

This European Standard is applicable to railway vehicle driving cabs which are air-conditioned or heated/ventilated.These include:— locomotives;— mainline, suburban and regional vehicles;— urban vehicles such as metres and trams.This European Standard does not considerThe special operational requirements of shunt locomotives.This European Standard specifies the comfort parameters forThe driving cab to ensure driver comfort which helps safe operation.The conditions under whichThe physical parameters mentioned inThis European Standard shall be measured are defined in EN 14813-2.

Railway applications - Air conditioning for driving cabs - Part 1: Comfort parameters (Incorporates Amendment A1: 2010)

ICS
45.060.10
CCS
发布
2006-08-01
实施

本标准规定了机车、动车用柴油机钢头铝裙组合活塞的技术要求、检验规则、检验方法及标志、包装、运输和贮存要求。 本标准适用于机车、动车用柴油机新造的钢头铝裙组合活塞(以下简称活塞)。

Component parts of diesel engine for locomotive and rail car Composite piston with steel crown and aluminum skirt

ICS
45.060.10
CCS
S34
发布
2006-06-21
实施
2006-11-01

本标准规定了机车、动车用柴油机活塞环的技术要求、检验规则、试验方法以及标志、包装、运输和贮存要求。 本标准适用于机车、动车用柴油机活塞环。

Componete parts of diesel engine for locomotive rail car.Piston ring

ICS
45.060.10
CCS
S34
发布
2006-06-21
实施
2006-11-01

本标准规定了机车、动车用柴油机零部件 铸铁气缸套的技术要求、检验规则、试验方法以及标志、包装、运输和贮存要求。 本标准适用于机车、动车用柴油机新造的缸径为φ180mm~280mmφ铸铁气缸套(以下简称气缸套)。

Componete parts of diesel engine for locomotive rail car.Cast iron cylinder liner

ICS
45.060.10
CCS
S34
发布
2006-06-21
实施
2006-11-01

本标准规定了机车柴油机柱塞偶件密封性试验台(以下简称试验台)的技术要求、试验方法、检验规则及标志、包装、运输和贮存。 本标准适用于以等压法进行柱塞偶件密封性试验的试验台。

Technical specification of pressure testing experiment for plunger and barred assembly of locomotive diesel engine

ICS
45.060.10
CCS
S34
发布
2006-06-21
实施
2006-11-01

本标准规定了机车、动车用柴油机进、排气门(以下简称气门)的技术要求、检验方法与检验规则及标志、包装、运输和贮存要求。 本标准适用于气缸直径φ180mm~φ280mm的往复活塞式柴油机用气门。

Component parts of diesel engine for locomotive and rail car Valve

ICS
45.060.10
CCS
S34
发布
2006-06-21
实施
2006-11-01

本标准规定了机车、动车用车体空气过滤器的材料和结构要求、性能要求、试验方法、标识、包装、运输与贮存。 本标准适用于铁路各种类型机车、动车组及工矿机车车体进气系统的各种形式的空气过滤器。

Car body air filter for locomotive and rail car

ICS
45.060.10
CCS
S34
发布
2006-06-21
实施
2006-11-01

本标准规定了机车、动车用驱动齿轮箱的技术要求、试验方法及检验规则、标识、包装、运输与贮存等。 本标准适用于200km/h及以上速度等级的机车、动车用封闭平行定轴传动的驱动齿轮箱,包括直齿、斜齿、人字齿及其组合的单级或多级渐开线圆柱齿轮驱动齿轮箱。其他速度等级的驱动齿轮箱可参照本标准执行。

Driving gear box for locomotive and rail car

ICS
45.060.10
CCS
S33
发布
2006-06-21
实施
2006-11-01

本标准规定了列车尾部安全防护装置(以下简称列尾装置)及附属设备的组成和主要功能、环境条件、基本要求、主要技术指标、设备接口及数据传唤、设备安装要求和试验方法等内容。 本标准适用于列车尾部安全防护装置及附属设备的研制、设计、生产、使用和检验。

End-of-train safety equipment and accessories

ICS
45.060.10
CCS
S40
发布
2006-06-21
实施
2006-11-01

本标准规定了铁路牵引用柴油机排放污染物的限值和确定这些排放物的方法。 本标准适用于铁路牵引用柴油机,不适用于特殊用途的机车柴油机(例如炼油厂或矿山机车)和输出功率小于100kW的柴油机。本标准适用于铁路新牵引设备或现有牵引设备重新安装的柴油机。

Exhaust emission tests for railway diesel traction engines

ICS
45.060.10
CCS
S42
发布
2006-06-21
实施
2006-11-01

State of the railway vehicles - Control and instrumentation technology - Part 207-2: Telecontrol of trains

ICS
45.060.10
CCS
S34
发布
2006-02
实施
2006-02-01

State of the railway vehicles - Control and instrumentation technology - Part 207-16: On-board equipment - GSM-R-train radio

ICS
45.060.10
CCS
S68
发布
2005-11
实施
2005-11-01

State of the railway vehicles - Control and instrumentation technology - Part 207-14: Procedure for changing the software on approved vehicles

ICS
45.060.10
CCS
S35
发布
2005-11
实施
2005-11-01



Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号