45.080 钢轨和线路构件 标准查询与下载

NF F50-300/IN1:2010 轨道交通.轨道.专用轨道.凹槽线和相关构造

Railway applications - Track - Special purpose rail - Grooved and associated construction.

GOST R 53866-2010 起重机轨道.规范

Grane rails. Specifications

KS R 9195-2009 铁轨绝缘材料.性能试验方法

이 표준은 철도 신호 보안 장치의 레일 절연에 사용되는 플라스틱제 및 벌커나이즈드 파이버제

Insulating materials of insulated rail joint－Test methods

DS/EN 13230-1:2009 铁路应用 轨道 混凝土枕木和支座 第1部分：一般要求

This part of EN 13230 defines technical criteria and control procedures which have to be satisfied by the constituent materials and the finished concrete sleepers and bearers, i.e.: precast concrete sleepers, bearers for switches and crossings, and special elements for railway tracks.The main requirement of concrete sleepers and bearers is the transmission of vertical, lateral and longitudinal loads from the rails to the ballast or other support. In use they are also exposed to frost damage and to moisture, which can result in detrimental chemical reactions within the sleeper.In this standard mechanical tests are defined which provide assurance of the capab

Railway applications - Track - Concrete sleepers and bearers - Part 1: General requirements

DS/EN 13230-4:2009 铁路应用 轨道 混凝土枕木和支座 第4部分：转辙器和交叉路口的预应力支座

This part of prEN 13230 defines additional technical criteria and control procedures as well as specific tolerance limits related to designing and manufacturing prestressed bearers for switches and crossings with a maximum length of 8,5 m.Bearers longer than 8,5 m are considered as special elements and shall comply with prEN 13230-5.

Railway applications - Track - Concrete sleepers and bearers - Part 4: Prestressed bearers for switches and crossings

DS/EN 13230-3:2009 铁路应用 轨道 混凝土枕木和支座 第3部分：双块钢筋枕木

This part of prEN 13230 defines technical criteria and control procedures for designing and manufacturing twin block reinforced concrete sleepers.

Railway applications - Track - Concrete sleepers and bearers - Part 3: Twin-block reinforced sleepers

DS/EN 13230-5:2009 铁路应用 轨道 混凝土枕木和支座 第5部分：特殊元件

This part of prEN 13230 defines additional technical criteria and control procedures related to the design and manufacture of special elements.

Railway applications - Track - Concrete sleepers and bearers - Part 5: Special elements

DS/EN 13230-2:2009 铁路应用 轨道 混凝土枕木和支座 第2部分：预应力整体式枕木

This part of EN 13230 defines additional technical criteria and control procedures related to designing and manufacturing prestressed monoblock sleepers.

Railway applications - Track - Concrete sleepers and bearers - Part 2: Prestressed monoblock sleepers

ASTM F2157-09 合成表面运行轨道的标准规范

1.1 This specification establishes the minimum performance requirements and classification when tested in accordance with the procedures outlined within this specification. All documents referencing this specification must include classification required. 1.2 This specification does not imply that an injury cannot be incurred if the surface is found to be in compliance with this specification. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

Standard Specification for Synthetic Surfaced Running Tracks

TB/T 2345-2008 43kg/m-75kg/m钢轨接头夹板订货技术条件

本标准规定了钢轨接头夹板型式尺寸及允许偏差、技术要求、试验方法、检验规则、包装标志和质量证明书。 本标准适用于43kg/m、50kg/m、60kg/m和75kg/m钢轨用接头夹板。

Technical specifications for the procurement of 43kg/m～75kg/m as joint bar

DS/EN 13848-1+A1:2008 铁路应用 轨道 轨道几何质量 第1部分：轨道几何特征

This European Standard specifies the requirements for the homologation of track geometry quality parameters as measured by various measuring devices fitted on track recording vehicles. These measuring devices are described in Part 2 of the standard. This European Standard applies to all track geometry parameters including track gauge, longitudinal level, alignment, cross level (cant / superelevation) and twist. It defines each parameter and specifies the requirements for measurement, the analysis methods and the presentation of results. Parts 3 and 4 give a description of measuring devices complying partially with this Part 1 according to the specificities

Railway applications - Track - Track geometry quality - Part 1: Characterisation of track geometry

NF F58-600-1/IN1:2008 轨道交通.铁轨.铁轨几何形状质量.第1部分:铁轨几何形状特性

Railway applications - Track - Track geometry quality - Part 1 : characterisation of track geometry.

KS R 9165-2008 轻轨鱼尾板

FISH PLATES FOR LIGHT RAILS

KS R 9164-2008 铁轨用接头夹板

이 표준은 보통 레일1), 열처리 레일2), 중계 레일3), 끝부 열처리 레일4) 및 KS

Fish plates for rails

KS R 9164-2008(2018) 鱼板鱼栏

Fish plates for rails

NF F50-201-1/IN1:2008 轨道交通.轨道.铁轨.第1部分:46 kg/m及以上的丁字形铁轨

Railway applications - Track - Rail - Part 1 : Vignole railway rails 46 kg/m and above.

JIS E 1123:2007 轨端淬火钢轨

この規格は，JIS E1101に規定する普通レールの端部における頭部に熱処理を施した鉄道用レール(以下，レールという。)について規定する。

End hardened rails

JIS E 1120:2007 轨头淬火钢轨

この規格は，頭部全断面にわたり熱飢理を施した鉄道用レール(以下，レールという。)について規定する。

Head hardened rails

DS/EN 14587-1:2007 铁路应用-轨道-钢轨的闪光对焊-第1部分：固定工厂中的新 R220、R260、R260Mn 和 R350HT 级钢轨

This European Standard specifies requirements for the approval of a welding process in a fixed plant, together with the requirements for subsequent welding production.It applies to new Vignole railway rails R220, R260, R260Mn and R350HT grade rails of 46 kg/m and above, as contained in EN 13674-1, welded by a flash butt welding process in a fixed plant and intended for use on railway infrastructure.This European Standard applies to the welding of rails into welded strings.

Railway applications - Track - Flash butt welding of rails - Part 1: New R220, R260, R260Mn and R350HT grade rails in a fixed plant

JIS E 3017:2007 铁路信号发出用部件.防水试验方法

この規格は，鉄道信号保安部品（以下，部品という。)の防水試験方法について規定する。

Parts for railway signaling -- Waterproof test methods