47.020.70 导航和控制设备 标准查询与下载

ASTM F1755M-96(2018) 船用固态柱状图测量仪的标准规范（米制）

1.1 This specification provides the requirements for design, construction, performance, and testing of solid state bargraphtype indicating meters. 1.2 The solid state bargraph meters covered by this specification are intended for use in shipboard applications of electrical measurement. This specification covers the requirements and quality assurance provisions for solid state, paneltype (edgewise), and rectangular switchboard-type instruments, which use light-emitting diodes (LEDs) for bargraph indication and optional digital displays. 1.3 This specification’s requirements may be invoked for specialized measurement applications where another quantity, for example, position, weight, concentration of a trace element in an atmosphere sample, and so forth, is converted to electrical energy for display and measurement. Special dial markings shall be specified for such cases. 1.4 The values stated in SI units are to be regarded as standard. The values given in parentheses are mathematical conversions to inch-pound units that are provided for information only and are not considered standard. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Solid State Bargraph Meters for Shipboard Use (Metric)

ASTM F957-91(2018) 锣声信号标准规范

1.1 This specification covers gongs for use on ships 100 m or more in length, as required by International Regulations (see Appendix X1). 1.2 For consistency with International Regulations, all measurements are in SI units. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Gong, Sound Signaling

ASTM F956-91(2018) 贝尔 铸造 声音信号的标准规范

1.1 This specification covers cast sound-signalling bells, together with bulkhead mounting plates for the smaller bells, for use on ships, boats, and other marine craft, for compliance with the rules in the convention on the International Regulations for Preventing Collisions at Sea (commonly called Colregs).2 See Appendix X1. 1.2 Bells and bulkhead mounting plate shall be sized as indicated in Section 4 (see Appendix X2). 1.3 For consistency with International Regulations, all measurements are in SI units. 1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Bell, Cast, Sound Signalling

ISO 19848:2018 船舶和海洋技术.船上机械和设备的标准数据

This document applies to the structure of the ship and to shipboard machinery and equipment, and is intended for implementers of software used for the capture and processing of sensor data from the objects mentioned above. For those purposes, this document describes the way to name the sensor, required data item, and the way to describe the data above.

Ships and marine technology - Standard data for shipboard machinery and equipment

ISO 19847:2018 船舶和海洋技术.海上共享现场数据的船用数据服务器

Ships and marine technology - Shipboard data servers to share field data at sea

DIN ISO 13643-4:2018 船舶和海洋技术. 船舶的操控. 第4部分: 停止, 加速和横越 (ISO 13643-4-2017); 德文和英文文本

This standard describes the coasting stop trial, the acceleration trial, the stopping trial and traversing test/trial carried out with surface ships, submarines and models. The definitions, symbols, and test conditions specified in this standard are the test-specific physical quantities for description and determination of the certain ship manoeuvring characteristics.

Ships and marine technology - Manoeuvring of ships - Part 4: Stopping, acceleration, traversing (ISO 13643-4:2017); Text in German and English

DIN ISO 13643-5:2018 船舶和海洋技术. 船舶的操控. 第5部分: 特殊潜艇 (ISO 13643-5-2017); 德文和英文文本

This standard describes the meander trial, the vertical overshoot trial, the neutral level flight test/trial and critical speed trial carried out with surface ships, submarines and models. The definitions, symbols, and test conditions specified in this standard are the test-specific physical quantities for description and determination of the certain ship manoeuvring characteristics.

Ships and marine technology - Manoeuvring of ships - Part 5: Submarine specials (ISO 13643-5:2017); Text in German and English

DIN ISO 13643-6:2018 船舶和海洋技术. 船舶的操控. 第6部分: 特殊模型试验 (ISO 13643-6-2017); 德文和英文文本

This standard describes the planar motion test, the rotating arm test, the oblique towing test and the wind tunnel test carried out with models. The definitions, symbols, and test conditions specified in this standard are the test-specific physical quantities for description and determination of the certain ship manoeuvring characteristics.

Ships and marine technology - Manoeuvring of ships - Part 6: Model test specials (ISO 13643-6:2017); Text in German and English

DIN ISO 13643-2:2018 船舶和海洋技术. 船舶的操控. 第2部分: 转弯和偏航检查 (ISO 13643-2-2017); 德文和英文文本

This standard describes the turning circle test/trial, the accelerating turn test/trial, the zig-zag test/trial, the turning test/trial with thrusters, the course change test/trial, the parallel track test/trial and person over board trial carried out with surface ships, submarines and models. The definitions, symbols, and test conditions specified in this standard are the test-specific physical quantities for description and determination of the certain ship manoeuvring characteristics.

Ships and marine technology - Manoeuvring of ships - Part 2: Turning and yaw checking (ISO 13643-2:2017); Text in German and English

DIN ISO 13643-3:2018 船舶和海洋技术. 船舶的操控. 第3部分: 偏航稳定性和转向 (ISO 13643-3-2017); 德文和英文文本

This standard describes the pull-pout trial, the astern trial, the sine test/trial, the reverse spiral test/trial according to Bech, the direct spiral test/trial according to Dieudonné and weave trial carried out with surface ships, submarines and models. The definitions, symbols, and test conditions specified in this standard are the test-specific physical quantities for description and determination of the certain ship manoeuvring characteristics.

Ships and marine technology - Manoeuvring of ships - Part 3: Yaw stability and steering (ISO 13643-3:2017); Text in German and English

JT/T 1223-2018 落水人员主动报警定位终端技术要求

Technical requirements for active alarm and positioning terminals for persons falling into water

EN IEC 61162-460:2018 海上导航和无线电通信设备和系统 数字接口 第460部分：多个通话者和多个收听者 以太网互连 安全和安保

Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 460: Multiple talkers and multiple listeners - Ethernet interconnection - Safety and security

EN IEC 61162-450:2018 海上导航和无线电通信设备和系统 数字接口 第450部分：多个通话者和多个收听者 以太网互连

Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 450: Multiple talkers and multiple listeners - Ethernet interconnection

IEC 61993-2:2018 海上导航和无线电通信设备及系统.自动识别系统（AIS）.第2部分:自动识别系统（AIS）的A级船载设备.操作和性能要求 试验方法和要求的试验结果

Maritime navigation and radiocommunication equipment and systems - Automatic identification systems (AIS) - Part 2: Class A shipborne equipment of the automatic identification system (AIS) - Operation

IEC 61993-2:2018 RLV 海上导航和无线电通信设备及系统.自动识别系统（AIS）.第2部分:自动识别系统（AIS）的A级船载设备.操作和性能要求 试验方法和要求的试验结果

Maritime navigation and radiocommunication equipment and systems - Automatic identification systems (AIS) - Part 2: Class A shipborne equipment of the automatic identification system (AIS) - Operation

JT/T 1205-2018 国际移动卫星FB500船舶地球站 操作和性能要求、测试方法和要求的测试结果

Test results of Inmarsat FB500 ship earth station operation and performance requirements, test methods and requirements

IEC 61162-460:2018 RLV 海上导航和无线电通信设备及系统.数字接口.第460部分:多通话器和多监听器.以太网互连.安全和保密

Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 460: Multiple talkers and multiple listeners - Ethernet interconnection - Safety and security

IEC 61162-450:2018 RLV 海上导航和无线电通信设备及系统数字接口第450部分:多通话器和多监听器以太网互连

Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 450: Multiple talkers and multiple listeners - Ethernet interconnection

DIN EN 303402:2018 用于 MF 和 HF 频段的海上移动发射器和接收器 协调标准，涵盖指令 2014/53/EU 第 3.2 条和 3.3（g）条的基本要求（英文版 EN 303 402 V2.1.2（2017 09）饰演杰玛

This European Standard (EN) has been developed by the European Standardization Organization ETSI (European Telecommunication Standardization Institute) and specifies requirements in the telecommunications sector.

Maritime mobile transmitters and receivers for use in the MF and HF bands - Harmonised Standard covering the essential requirements of articles 3.2 and 3.3(g) of Directive 2014/53/EU (Endorsement of the English version EN 303 402 V2.1.2 (2017-09) as Germa

T/CIS 47001-2018 船舶气象仪通用技术规范

1 范围 2 规范性引用文件 3 术语和定义 4 要求 5 检验方法  参考文献

General specifications for ship meteorological instrument