47.020.70 导航和控制设备 标准查询与下载

BS ISO 13643-1:2017 船舶和海洋技术 船舶的操纵 一般概念、数量和测试条件

Ships and marine technology. Manoeuvring of ships. General concepts, quantities and test conditions

BS ISO 13643-6:2017 船舶和海洋技术 船舶的操纵 模型测试特价

Ships and marine technology. Manoeuvring of ships. Model test specials

BS ISO 13643-4:2017 船舶和海洋技术 船舶的操纵 停止、加速、行驶

Ships and marine technology. Manoeuvring of ships. Stopping, acceleration, traversing

BS EN 62320-2:2017 海上导航和无线电通信设备及系统.自动识别系统(AIS).AIS导航辅助设备站.操作和性能要求、测试方法和要求的试验结果

Maritime navigation and radiocommunication equipment and systems. Automatic identification system (AIS). AIS AtoN Stations. Operational and performance requirements, methods of testing and required test results

ISO 13643-5:2017 船舶与海洋技术. 船舶的操控. 第5部分: 特殊潜艇

This document defines symbols and terms and provides guidelines for the conduct of tests to give evidence about the manoeuvring ability in the vertical plane of submarines and models. It is intended to be read in conjunction with ISO 13643-1.

Ships and marine technology - Manoeuvring of ships - Part 5: Submarine specials

ISO 13643-1:2017 船舶与海洋技术. 船舶的操控. 第1部分: 通用概念, 数量和试验条件

Ships and marine technology - Manoeuvring of ships - Part 1: General concepts, quantities and test conditions

ISO 13643-4:2017 船舶与海洋技术. 船舶的操控. 第4部分: 停船, 加速, 曲线横行

Ships and marine technology - Manoeuvring of ships - Part 4: Stopping, acceleration, traversing

ISO 13643-2:2017 船舶与海洋技术. 船舶的操控. 第2部分: 转弯和偏航检查

Ships and marine technology - Manoeuvring of ships - Part 2: Turning and yaw checking

ISO 13643-3:2017 船舶与海洋技术. 船舶的操控. 第3部分: 偏航稳定性和转向

This document defines symbols and terms and provides guidelines for the conduct of tests to give evidence about the yaw stability and steering of surface ships, submarines, and models. It is meant to be read in conjunction with ISO 13643-1.

Ships and marine technology - Manoeuvring of ships - Part 3: Yaw stability and steering

ISO 13643-6:2017 船舶与海洋技术. 船舶的操控. 第6部分: 特定模型试验

This document defines s ymbols and terms and provides guidelines for the conduct of tests to determine the hydrodynamic forces and moments due to prescribed motions under a planar-motion, a circular- motion or an oblique towing or flow s ys tem for models of surface ships and submarines. It also defines s ymbols and terms and provides guidelines for the conduct of tests in a wind tunnel. It is intended to be read in conj unction with ISO 13643-1 .

Ships and marine technology - Manoeuvring of ships - Part 6: Model test specials

IEC 62287-2:2017 海洋导航和无线电通信设备和系统.自动识别系统(AIS)的B级船载设备.第2部分:自组织时分多址(SOTDMA)技术

This part of IEC 62287 specifies operational and performance requirements, methods of testing and required test results for Class B "SO" shipborne automatic identifications system (AIS) equipment using self-organising time division multiple access (SOTDMA) techniques as described in Recommendation ITU-R M.1371. This document takes into account other associated IEC International Standards and existing national standards, as applicable. The main differences between Class B "CS" (IEC 62287-1) and Class B "SO" units are that the Class B "SO" covers all 25 kHz channels listed in Recommendation ITU-R M.1084-5; only uses the internal GNSS - no position sensor input is allowed; requires use of VDL Message 17 for correction of the internal GNSS; requires a presentation interface; has additional reporting intervals, down to 5 s; has two power settings, with a high level of 5 W, and; has the capability to transmit binary messages. This document is applicable to AIS equipment used on craft that are not covered by a mandatory carriage requirement of AIS under SOLAS Chapter V.

Maritime navigation and radiocommunication equipment and systems - Class B shipborne equipment of the automatic identification system (AIS) - Part 2: Self-organising time division multiple access (SOTDMA) techniques

BS EN 61162-1:2016 海上导航和无线电通信设备和系统 数字接口 单个说话者和多个听众

Maritime navigation and radiocommunication equipment and systems. Digital interfaces. Single talker and multiple listeners

EN 62320-2:2017 海上导航和无线电通信设备及系统.自动识别系统(AIS).第2部分:AIS导航辅助设备站.操作和性能要求,试验方法和要求的试验结果

IEC 62320-2:2016(E) is available as IEC 62320-2:2016 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition. IEC 62320-2:2016(E) specifies the operational and performance requirements, methods of testing and required test results for AIS AtoN Stations compatible with the performance standards adopted by IMO Resolution MSC.74(69), Annex 3, Universal AIS. It incorporates the technical characteristics of non-shipborne AIS AtoN equipment, included in Recommendation ITU-R M.1371 and IALA Recommendation A-126. Where applicable, it also takes into account the ITU Radio Regulations. This standard takes into account other associated IEC International Standards and existing national standards, as applicable. This document is applicable for automatic identification system (AIS) installations on aids to navigation (AtoN). This edition includes the following significant technical changes with respect to the previous edition: - additional cyber security measures; - updated description of configuration via VDL; - updated VDL access scheme requirements; - new PI sentences and VDL message structures with added description for optional TAG blocks; - added requirement for at least one standard method for configuration using Standard PI sentences; - updated test methods and updated Annexes.

Maritime navigation and radiocommunication equipment and systems - Automatic identification system (AIS) - Part 2: AIS AtoN Stations - Operational and performance requirements, methods of testing and required test results

EN 62940:2017 海上导航和无线电通信设备和系统 综合通信系统（ICS） 操作和性能要求、测试方法和所需的测试结果

IEC 62940:2016(E) specifies the minimum operational and performance requirements, technical characteristics and methods of testing, and required test results, for shipborne integrated communication systems (ICS) designed to perform ship external communication and distress and safety communications (GMDSS) and the functions of onboard routeing of this communication. It takes account of IMO Resolution A.694(17) and is associated with IEC 60945. When a requirement in this document is different from IEC 60945, the requirement in this document takes precedence.

Maritime navigation and radiocommunication equipment and systems - Integrated communication system (ICS) - Operational and performance requirements, methods of testing and required test results

KS V ISO 22554:2017 船舶和航海技术螺旋桨轴转数指示器电动式和电子式

Ships and marine technology - Propeller Shaft revolution indicators - Electric type and electronic type

KS V ISO 22554-2017 船舶和海洋技术 - 螺旋桨轴革命指标 - 电气类型和电子类型

Ships and marine technology - Propeller Shaft revolution indicators - Electric type and electronic type

KS V ISO 22554-2017(2022) 船舶和海上技术.传动轴旋转指示器.电气型和电子型

Ships and marine technology - Propeller Shaft revolution indicators - Electric type and electronic type

ASTM F824-93(2017) 桌子 混凝土 船舶 钢铁的标准规格

1.1 This specification covers the construction of round, square, and rectangular marine mess tables with or without adjustable lee rails for use in crew, officer, and passenger dining areas aboard ship. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

Standard Specification for Tables, Mess, Marine, Steel

ASTM F823-93(2017) 书桌 日志 海事 钢铁 机柜标准规格

1.1 This specification covers the construction of marine log desks of steel construction with cabinets. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

Standard Specification for Desk, Log, Marine, Steel, with Cabinet

GSO ISO 16425:2016 船舶和航海技术 船上设备和系统的船舶通信网络安装指南

This International Standard specifies installation guidelines for ship communication networks for improving communication for shipboard equipment and systems that are independent from navigational equipment networks and engine-control networks. This International Standard utilizes existing standards relating to protocols, and provides new guidelines for such aspects as communication network-system architecture, administration, operation, and installation. The new guidelines specifically include: redundancy if necessary for a shipboard communication network system; network administration that does not require experts; physical as well as logical security; and network installation.

Ships and marine technology -- Guidelines for the installation of ship communication networks for shipboard equipment and systems