53.020.20 起重机 标准查询与下载
共找到 2089 条与 起重机 相关的标准，共 140 页
Cranes — Design calculation for rail wheels and associated trolley track supporting structure — Part 1: General
- ICS
- 53.020.20
- CCS
- 发布
- 2021-12-24
- 实施
Cranes — Design principles for loads and load combinations —Part 4: Jib cranes
- ICS
- 53.020.20
- CCS
- 发布
- 2021-12-24
- 实施
Cranes ― Classification ― Part 1: General
- ICS
- 53.020.20
- CCS
- 发布
- 2021-12-24
- 实施
Cranes and related equipment ― Classification ―Part 4: Jib cranes
- ICS
- 53.020.20
- CCS
- 发布
- 2021-12-24
- 实施
Cranes ― Classification ― Part 5: Overhead travelling and portal bridge cranes
- ICS
- 53.020.20
- CCS
- 发布
- 2021-12-24
- 实施
Cranes — Monitoring for crane design working period
- ICS
- 53.020.20
- CCS
- 发布
- 2021-12-24
- 实施
Cranes — General design — Limit states and proof of competence of forged steel hooks
- ICS
- 53.020.20
- CCS
- 发布
- 2021-12-24
- 实施
Cranes and related equipment ― Classification ―Part 4: Jib cranes
- ICS
- 53.020.20
- CCS
- 发布
- 2021-12-24
- 实施
Cranes — General design — Limit states and proof of competence of forged steel hooks
- ICS
- 53.020.20
- CCS
- 发布
- 2021-12-24
- 实施
Cranes ― Classification ― Part 1: General
- ICS
- 53.020.20
- CCS
- 发布
- 2021-12-24
- 实施
Cranes — Limiting and indicating devices — Part 1: General
- ICS
- 53.020.20
- CCS
- 发布
- 2021-12-24
- 实施
Cranes — Limiting and indicating devices — Part 1: General
- ICS
- 53.020.20
- CCS
- 发布
- 2021-12-24
- 实施
Cranes other than mobile and floating cranes ―General requirements for stability
- ICS
- 53.020.20
- CCS
- 发布
- 2021-12-24
- 实施
1.一般规定； 2.整机：平衡重与压重、稳定性要求、爬升装置、主要性能参数误差、刚性要求、外观及表面防护、噪声； 3.结构：材料、连接、互换性、结构表面、排水、通道及安全防护设施、司机室； 4.机械； 5.电气； 6.安全装置； 7.智能化系统； 8.制造商提供的技术资料：销售塔机时应提供的资料、供货时应提供的资料
Tower crane
- ICS
- 53.020.20
- CCS
- C343
- 发布
- 2021-12-22
- 实施
- 2021-12-24
Within the general scope defined in Section I of the B30 Standard Introduction, American National Standard B30.5 applies to crawler cranes, locomotive cranes, wheelmounted cranes, and any variations thereof that retain the same fundamental characteristics. The scope includes only cranes of the above types that are basically powered by internal combustion engines or electric motors. Side boom tractors and cranes designed for railway and automobile wreck clearance, digger derricks, cranes manufactured specifically for, or when used for, energized electrical line service, knuckle boom, trolley boom cranes, and cranes having a maximum rated capacity of 1 ton or less are excluded. Special adaptions to the general types of machines covered by this Volume, where applicable, fall under this scope. Some basic machine types within this scope are used alternatively for lifting service and for applications not considered to be lifting service. All of the requirements of this Volume are applicable to such machines when used for lifting service. However, at a minimum, Section 5-1.11, Chapter 5-2, and Section 5-3.1 apply to machines when used in other than lifting service. 在B30标准介绍第一节定义的一般范围内，美国国家标准B30.5适用于履带式起重机，机车起重机，轮式起重机及其保留相同基本特性的任何变体。范围仅包括上述类型的起重机，这些起重机基本上由内燃机或电动机提供动力。不包括设计用于铁路和汽车残骸清理的侧臂牵引车和起重机、挖掘机井架、专门为通电线路服务制造或用于通电线路服务的起重机、折节臂、小车吊臂起重机以及最大额定容量为 1 吨或更小的起重机。 在适用的情况下，对本卷所涵盖的一般类型的机器的特殊调整属于此范围。 此范围内的一些基本机器类型可替代用于起重服务和不被视为起重服务的应用。本卷的所有要求均适用于用于起重服务的此类机器。但是，至少，第 5-1.11 节、第 5-2 章和第 5-3.1 节适用于用于起重服务以外的机器。
Mobile and Locomotive Cranes
- ICS
- 53.020.20
- CCS
- J80
- 发布
- 2021-12-17
- 实施
- 2021-12-17
This European Standard specifies load actions to be used together with the standard EN 13001-1 and EN 13001-3, and as such they specify conditions and requirements on design to prevent mechanical hazards of cranes, and a method of verification of those requirements. Specific requ
Crane safety - General design - Part 2: Load actions; German version EN 13001-2:2021
- ICS
- 53.020.20
- CCS
- 发布
- 2021-12-00
- 实施
This document provides specific requirements for anchoring devices for in-service and out-of-service conditions for cranes and crane parts as defined in ISO 4306-1.
Cranes — Anchoring devices for in-service and out-of-service conditions
- ICS
- 53.020.20
- CCS
- 发布
- 2021-11-30
- 实施
本文件规定了基于数字图像处理技术的起重机械挠度非接触检测的基本要求、方法和步骤、数据处理、结果判断和检测问题处理。 本文件适用于桥式、门式起重机械挠度测量。
Non-contact deflection detection method for lifting appliances based on digital image processing technology
- ICS
- 53.020.20
- CCS
- J699
- 发布
- 2021-11-22
- 实施
- 2022-01-27
The B30.7 Volume includes provisions that apply to the construction, installation, operation, inspection, testing, and maintenance of winches arranged for mounting on a foundation or other supporting structure for moving loads. Winches addressed in this Volume are those typically used in industrial, construction, and maritime applications. The requirements included in this Volume apply to winches that are powered by internal combustion engines, electric motors, compressed air, or hydraulics, and that utilize drums and rope. This Volume does not apply to overhead hoists, mine hoists, capstans, or winches installed as an integral part of the lifting system of other B30 equipment. Also excluded are winches used with (a) all-terrain-type recreational vehicles (b) drill rig relocation trucks (c) tow trucks (d) vehicle recovery units (e) boat trailers (f) amusement park rides (g) excavating equipment (h) equipment covered by ANSI A10, ANSI A17, ANSI A90, ANSI A92, ANSI A120, ANSI B20, ANSI B56, and ANSI B77 standards (i) free-fall applications such as pile driving Provisions of this Volume do not apply to the movement of personnel. B30.7 卷包括适用于安装在移动负载的基础或其他支撑结构上的绞车的建造、安装、操作、检查、测试和维护的规定。本卷中涉及的绞车是通常用于工业、建筑和海事应用的绞车。本卷中包含的要求适用于由内燃机、电动机、压缩空气或液压系统提供动力并使用卷筒和绳索的绞车。 本卷不适用于作为其他 B30 设备起重系统组成部分安装的高架葫芦、矿井葫芦、绞盘或绞车。同样不包括与 （a） 全地形型休闲车 （b） 钻机搬迁卡车 （c） 拖车 （d） 车辆回收股 （e） 船用拖车 （f） 游乐园游乐设施 （g） 挖掘设备 （h） ANSI A10、ANSI A17、ANSI A90、ANSI A92、ANSI A120、ANSI B20、ANSI B56 和 ANSI B77 标准涵盖的设备 （i） 打桩等自由落体应用 本卷的规定不适用于人员流动。
Winches
- ICS
- 53.020.20
- CCS
- J80
- 发布
- 2021-11-19
- 实施
- 2021-11-19
