53.080 储藏设备 标准查询与下载

NF P22-750:2009 静态钢存储系统.可调式集装箱上架系统.结构设计原则

Steel static storage systems - Adjustable pallet racking systems - Principles for structural design.

DIN EN 15095:2009 电动移动货架、传送带和存储升降机 安全要求

1.1 This European Standard deals with the safety requirements for the following types of power-operated storage equipment: -- storage carousels; -- storage lifts; -- mobile shelving, pallet racking and cantilever racking with the objective of eliminating or minimising the hazards described in Clause 4. These hazards can arise during installation, starting up, operation, maintenance, testing and dismantling of the equipment. 1.2 It is essential that the safety requirements and/or measures taken in this standard be applied to storage equipment which operates indoors. Under difficult conditions, it is essential that additional hazard analysis and safety measures be taken into account, e.g. outdoor conditions, freezer applications, high temperatures, corrosive environment, strong magnetic fields, risk of explosive atmosphere, radioactive conditions, storage goods which due to their nature could generate hazardous situations (e. g. molten metal, acids/alkalis, fragile goods or explosives), effects of earthquakes and also contact with food. 1.3 Examples of power-operated storage equipment to which this standard applies are shown in Annex A. 1.4 With regard to buildings and parts of buildings, this standard applies only insofar that an assessment regarding hazards and risks in connection with interfaces to the storage equipment is carried out. 1..5 Storage equipment whose only power source is directly used human labour or gravity are excluded from the scope of application of this standard. 1.6 Power-operated storage equipment or parts of them do not fall under the regulations for passenger lifts. They are intended to handle and store goods. They are not intended to transport passengers under normal use (except for maintenance) and therefore not considered to be lifts (elevators). 1.7 This standard does not take hazards into account, which arise from noisy environments or environments subject to electromagnetic interference outside the range quoted in EN 61000-6-2.

Power-operated mobile racking and shelving, carousels and storage lifts - Safety requirements (includes Amendment A1:2008); English version of DIN EN 15095:2009-06

BS EN 528:2008 轨道式存储和卸取设备.安全性要求

This standard applies to all types of S/R machines, restricted to the rails on which they travel within and outside the aisles, which embody lifting means and may embody lateral handling facilities, for the storage and retrieval of unit loads and/or long goods such as bar materials and/or for order picking or similar duties. Also included is the transfer equipment used to change between aisles. Control of machines may range from manual to fully automatic. This standard does not apply to free ranging industrial trucks or robots. References in this standard to racking, buildings and systems only apply where it is necessary to assess the hazards and risks at their interfaces with S/R machines. This standard deals with all significant hazards relevant to rail dependent storage and retrieval equipment, when they are used as intended under the conditions foreseen by the manufacturer (see Clause 4). This standard applies to machines and equipment that are manufactured after the date of issue of this standard. Illustrations of examples of machines and transfer equipment to which this standard applies are shown in Annex A. Safety requirements and/or measures in this standard apply to equipment used under indoor conditions. However, additional risk assessments and safety measures need to be considered for uses in severe conditions, e.g. freezer applications, high temperatures, loads, the nature of which could lead to a dangerous situation (e.g. especially brittle loads, explosives), earthquake effects and also contact with foodstuff. Hazards during decommissioning are not covered. This European Standard also deals with the technical requirements for electromagnetic compatibility (EMC). Noise emitted by these machines is not considered as significant but as a relevant hazard. This means that the manufacturer of the machine is obliged to carry out noise reduction and indicate the noise level.

Rail dependent storage and retrieval equipment - Safety requirements

LST EN 15512-2009 钢制静态存储系统 可调节托盘货架系统 结构设计原则

Steel static storage systems - Adjustable pallet racking systems - Principles for structural design

DS/EN 15512:2009 钢制静态存储系统 可调节托盘货架系统 结构设计原则

This European Standard specifies the structural design requirements applicable to all types of adjustable beam pallet rack systems fabricated from steel members intended for the storage of unit loads and subject to predominantly static loads. Both un-braced and braced systems are included.This European Standard gives guidelines for the design of clad rack buildings where requirements are not covered in EN 1993. The requirements of this European Standard also apply to ancillary structures, where rack components are employed as the main structural members. This European Standard does not cover other generic types of storage structures. Specifically, this Euro

Steel static storage systems - Adjustable pallet racking systems - Principles for structural design

BS EN 1398:2009 装卸桥.安全要求

1.1 This European Standard specifies the safety requirements for design, construction, installation, maintenance and testing of dock levellers and for safety components on dock levellers. With the exception of: a) dock levellers for marine and aircraft applications; b) lifting tables; c) vehicle mounted tail lifts. NOTE 1 Requirements for lifting tables are laid down in EN 1570. NOTE 2 Requirements for vehicle mounted tail lifts are laid down in EN 1756-1. 1.2 This European Standard is applicable to dock levellers which are used by persons and/or manual or power driven transport equipment (e. g. forklift trucks) as traffic paths between goods vehicles, both road vehicles and rail wagons, and parts of buildings such as loading docks. This standard does not deal with other bridging devices not shown in Figure 1. 1.3 This European Standard specifies requirements in order to protect persons and objects against accidents and health problems and damage during use and operation of dock levellers. Persons to protect are: a) operators and users; b) maintaining and inspecting personnel; c) persons near the dock leveller. Objects to be protected are: d) goods on dock levellers; e) transport equipment on dock levellers. 1.4 The significant hazards of dock levellers are listed in Clause 4. These hazards have been identified by risk assessment according to EN ISO 12100-2 and require actions to avoid the hazard, or to reduce the risk, which are covered in Clause 5. 1.5 The safety requirements are based on the assumption that the dock levellers are regularly maintained by competent persons to the instructions of the manufacturer and that the operating person has been instructed in the use of the dock leveller. 1.6 This European Standard is not applicable to dock levellers which are manufactured before the date of its publication as EN. 1.7 This European Standard deals with all significant hazards, hazardous situations and events relevant to dock Levellers, when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4).

Dock levellers - Safety requirements

DS/EN 1398:2009 装卸平台 安全要求

1.1 This European Standard specifies the safety requirements for design, construction, installation, maintenance and testing of dock levellers and for safety components on dock levellers.With the exception of:a) dock levellers for marine and aircraft applications;b) lifting tables;c) vehicle mounted tail lifts.NOTE 1 Requirements for lifting tables are laid down in EN 1570.NOTE 2 Requirements for vehicle mounted tail lifts are laid down in EN 1756-1.1.2 This European Standard is applicable to dock levellers which are used by persons and/or manual or power driven transport equipment (e. g. forklift trucks) as traffic paths between goods vehicles, both road v

Dock levellers - Safety requirements

LST EN 15095-2008+A1-2009 电动移动式货架和货架、转盘和储物升降机 安全要求

Power-operated mobile racking and shelving, carousels and storage lifts - Safety requirements

LST EN 15629-2009 钢制静态存储系统 存储设备规范

Steel static storage systems - Specification of storage equipment

LST EN 15635-2009 钢制静态存储系统-存储设备的应用和维护

Steel static storage systems - Application and maintenance of storage equipment

EN 15512:2009 钢制静态存储设备.可调托盘货架.结构设计原则

This European Standard specifies the structural design requirements applicable to all types of adjustable beam pallet rack systems fabricated from steel members intended for the storage of unit loads and subject to predominantly static loads. Both un-braced and braced systems are included.This European Standard gives guidelines for the design of clad rack buildings where requirements are not covered in EN 1993. The requirements of this European Standard also apply to ancillary structures; where rack components are employed as the main structural members.This European Standard does not cover other generic types of storage structures. Specifically;This European Standard does not apply to mobile storage systems; drive-in; drive-through and cantilever racks or static steel shelving systems; nor doesThis European Standard establish specific design rules for the assessment of racking in seismic areas.

Steel static storage systems - Adjustable pallet racking systems - Principles for structural design

EN 1398:2009 船坞矫平机.安全要求

This European Standard specifies the safety requirements for design, construction, installation, maintenance and testing of dock levellers and for safety components on dock levellers.

Dock levellers - Safety requirements

DS/EN 15095+A1:2009 电动移动式货架和货架、转盘和储物升降机 安全要求

This European Standard provides terms and definitions on concepts and parameters used for EN 1005-21), prEN 1005-3, EN 1005-41) and EN 1005-51).Basic concepts and general ergonomic principles for the design of machinery are dealt with in EN 292-1, EN 292-2 and EN 614-1.This document is not applicable to specify the machinery which is manufactured before the date of publication of this document by CEN.

Power-operated mobile racking and shelving, carousels and storage lifts - Safety requirements

LST EN 15620-2009 钢制静态存储系统 可调节托盘货架 公差、变形和间隙

Steel static storage systems - Adjustable pallet racking - Tolerances, deformations and clearances

NF H92-101*NF EN 15095+A1:2009 电动移动货架、传送带和存储升降机.安全性要求

Power-operated mobile racking and shelving, carousels and storage lifts - Safety requirements.

NF H92-101/IN1*NF EN 15095/IN1:2009 电动移动货架、传送带和存储升降机.安全要求

Power-operated mobile racking and shelving, carousels and storage lifts - Safety requirements.

DIN EN 528:2009 受铁轨约束的储藏和出库设备.安全要求

This standard applies to all types of SIR machines, restricted to the rails on which they travel within and outside the aisles, which embody lifting means and may embody lateral handling facilities, for the storage and retrieval of unit loads and/or long goods such as bar materials and/or for order picking or similar duties. Also included is the transfer equipment used to change between aisles. Control of machines may range from manual to fully automatic. This standard does not apply to free ranging industrial trucks or robots. References in this standard to racking, buildings and systems only apply where it is necessary to assess the hazards and risks at their interfaces with SIR machines. This standard deals with all significant hazards relevant to rail dependent storage and retrieval equipment, when they are used as intended under the conditions foreseen by the manufacturer (see Clause 4). This standard applies to machines and equipment that are manufactured after the date of issue of this standard. Illustrations of examples of machines and transfer equipment to which this standard applies are shown in Annex A. Safety requirements and/or measures in this standard apply to equipment used under indoor conditions. However, additional risk assessments and safety measures need to be considered for uses in severe conditions, e.g. freezer applications, high temperatures, loads, the nature of which could lead to a dangerous situation (e.g. especially brittle loads, explosives), earthquake effects and also contact with foodstuff. Hazards during decommissioning are not covered. This European Standard also deals with the technical requirements for electromagnetic compatibility (EMC). Noise emitted by these machines is not considered as significant but as a relevant hazard. This means that the manufacturer of the machine is obliged to carry out noise reduction and indicate the noise level.

Rail dependent storage and retrieval equipment - Safety requirements; English version of DIN EN 528:2009-02

VDI 3577-2009 高架仓库用工业卡车 规格和操作条件

This guideline deals with floor-running nonrackbound industrial trucks. This guideline gives an overview of industrial trucks and their associated operating conditions, which are predominantly used for storage and retrieval operations in narrow aisles and for commissioning. Industrial trucks without lift or with low lift are not described in this guideline.

Industrial trucks for high-bay warehouses - Specification and operating conditions

BS EN 15629:2008 钢制稳态存储设备.存储设备的规范

This European Standard supplies guidelines for the technical specification to allow the design of racking and shelving in its various forms such as adjustable pallet racking (APR), crane serviced racking, drive-in racking (DIR), cantilever racking and shelving systems, including their various forms of construction, using manually operated and controlled mechanical handling systems. Some other forms of storage equipments are only partially covered and further consideration, beyond the scope of this document, may be required. This European Standard gives guidance for the specifier of storage systems to coordinate suppliers of all equipment including individual responsibilities. This European Standard does not cover storage equipments manufactured from materials other than steel (except for certain accessories) and equipment intended to be used for domestic storage purposes.

Steel static storage systems - Specification of storage equipment

BS EN 15620:2009 钢制静态存储设备 公差、变形和间隙

Steel static storage systems. Adjustable pallet racking. Tolerances, deformations and clearances