共找到 375 条与 罐、听、管 相关的标准,共 25 页
Light-gauge metal containers-Round open-top cans-Cans defined by their nominal gross lidded capacities
本标准适用于不带供电装置的低温食品运输保温容器,其他物品可参照使用。
Technical requirements for cold chain logistics insulation containers
The document specifies the diameters, length, wall thicknesses and shoulder thicknesses and other geometry characteristics of conical collapsible metallic tubes. It also specifies the way in which these tubes should be stacked together by the manufacturer. It is applicable to tubes used for packing of pharmaceutical, cosmetic, hygiene, food and other domestic and industrial products.
Packaging - Flexible conical metallic tubes - Dimensions and tolerances - German version EN 13047:2000
本标准适用于不带供电装置的低温食品运输保温容器. 本标准主要技术内容包括保温容器的规格、材料和性能以及对应的试验方法。
Cold chain logistics insulation container
Packaging - Test method to determine the porosity of the internal coating of flexible aluminium tubes - Part 1: Sodium chloride test; German version EN 15384-1:2017
Packaging - Test method to determine the porosity of the internal coating of flexible aluminium tubes - Part 2: Copper sulphate test; German version EN 15384-2:2017
Packaging. Test method to determine the porosity of the internal coating of flexible aluminium tubes. Copper sulphate test
Packaging. Test method to determine the porosity of the internal coating of flexible aluminium tubes. Sodium chloride test
This European Standard is applicable for internally coated cylindrical and conical aluminium tubes, mainly used for the packing of pharmaceutical, cosmetic, hygiene, food or other household products. The internal coating is used as a barrier and should avoid any contact between aluminium and the product. This standard defines the sodium chloride method to detect the electrolyte conductivity as one criterion for the quality of the internal coating. NOTE The electrolyte conductivity of the internal coating is only one criterion for evaluation of the quality of an internal coating. It does not give any information on the quantity or size of any pores or uncoated areas, nor any hint on possible reactions between the aluminium tube and the product. The electrolyte conductivity should never be used as the sole criterion for quality evaluation of the internal coating, but always with other parameters e. g. film thickness, acetone and/or ammonia resistance and of course results of enhanced stability studies.
Packaging - Test method to determine the porosity of the internal coating of flexible aluminium tubes - Part 1: Sodium chloride test
This European Standard is applicable for internally coated cylindrical aluminium tubes, mainly used for the packing of pharmaceutical, cosmetic, hygiene, food or other household products. The internal coating is used as a barrier and should avoid any contact between aluminium and the product. This standard defines the copper sulphate method to detect the electrolyte conductivity as one criterion for the quality of the internal coating. The electrolyte conductivity of the internal coating is only one criterion for evaluation of the quality of an internal coating. It does not give any information on the quantity or size of any pores or uncoated areas, nor any hint on possible reactions between the aluminium tube and the product. The electrolyte conductivity should never be used as the sole criterion for quality evaluation of the internal coating, but always with other parameters e. g. film thickness, acetone and/or ammonia resistance and of course results of enhanced stability studies.
Packaging - Test method to determine the porosity of the internal coating of flexible aluminium tubes - Part 2: Copper sulphate test
This part of ISO 90 defines open-top cans and can types, cross-sections, constructions, shapes, special features and capacities of such cans. It specifies methods for determining cross-sections and gross-lidded capacities. It also specifies tolerances on capacity and recommends an international designation.
Light gauge metal containers -- Definitions and determination of dimensions and capacities -- Part 1: Open-top cans
This part of ISO 90 defines general use containers, types of container, cross-sections, constructions, shapes, special features and capacities. It specifies methods for determining cross-sections, and gross-lidded and brimful capacities. It also recommends an international designation.
Light gauge metal containers -- Definitions and determination of dimensions and capacities -- Part 2: General use containers
Specifications for hermetically sealed metal cans for food and drink
Aluminum cans of deep drawing with easy open end. General specifications
Scope is not provided for this standard
Light-gauge metal containers -- Round open-top cans -- Internal diameters
Scope is not provided for this standard
Light-gauge metal containers -- Round open-top cans -- Cans for liquid products with added gas, defined by their nominal filling volumes
Scope is not provided for this standard
Light-gauge metal containers -- Round open-top cans -- Cans defined by their nominal gross lidded capacities
Scope is not provided for this standard
General use light gauge metal containers -- Nominal filling volumes of round cylindrical and tapered containers of up to 40 000 ml
本标准适用于不带供电装置的低温食品运输保温容器
Technical requirements for cold chain logistics insulation containers
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号