55.130 雾化剂罐 标准查询与下载

BS EN 14850:2006 气溶胶容器 25.4mm孔径的金属容器 接触高度测量

Aerosol containers. Metal containers with 25,4 mm aperture. Measurement of contact height

NF H44-004:2006 气溶胶容器.25.4 mm孔径的金属容器.阀座尺寸

Aerosols containers - Metal containers with 25,4 mm aperture - Dimensions of valve cups.

DIN EN 14850:2006 气溶胶容器.25.4 mm孔径的金属容器.接触高度测量.德文版本 EN 14850-2005

This European Standard describes a method of measuring the contact height of the compression closure between the valve cup and the aperture of an aerosol container. This standard applies to aerosol containers with 25,4 mm apertures as specified in EN 14847 and prEN 15006 fitted with aerosol valve cups as specified in EN 14848.

Aerosol containers - Metal containers with 25,4 mm aperture - Measurement of contact height; English version of DIN EN 14850:2006-02

DIN EN 14854:2006 气溶胶容器.玻璃容器.瓶颈涂层尺寸.德文版本 EN 14854-2005

This European Standard specifies the critical dimensions of the neck finish of glass aerosol containers with respect to the thorough and tight closing of valves with ferrules defined in EN 14849. This standard is applicable a nominal diameter of 11 mm, 13 mm, 15 mm, 17 mm, 18 mm and 20 mm necked aerosol containers with moulded and tubular neck finishes.

Aerosol containers - Glass containers - Dimensions of the neck finish; English version of DIN EN 14854:2006-02

DIN EN 14847:2006 气溶胶容器.马口铁容器.25.4 mm孔径的尺寸.德文版本 EN 14847-2005

This European Standard specifies the following dimensions of tinplate metal aerosol cans with 25,4 mm aperture: contact height, outside diameter, inside diameter and shoulder height. It is intended to be used with EN 14848 for clinching with valve cups.

Aerosol containers - Tinplate containers - Dimensions of the 25,4 mm aperture; English version of DIN EN 14847:2006-02

DIN EN 14848:2006 气溶胶容器.25.4 mm孔径的金属容器.阀座尺寸.德文版本 EN 14848-2005

This European Standard specifies the critical dimensions of valve cups suitable for clinching into 25,4 mm aperture metal aerosol containers. This standard is intended to be used with the metal aerosol containers specified in EN 14847 and prEN 15006.

Aerosol containers - Metal containers with 25,4 mm aperture - Dimensions of valve cups; English version of DIN EN 14848:2006-02

DIN EN 14849:2006 气溶胶容器.玻璃容器.气溶胶阀箍尺寸.德文版本 EN 14849-2005

This European Standard defines the dimensions which are important for an effective fastening of valves on glass aerosol containers with a nominal diameter of 11 mm, 13 mm, 15 mm, 17 mm, 18 mm and 20 mm neck finish, as defined in EN 14854.

Aerosol containers - Glass containers - Dimensions of aerosol valve ferrules; English version of DIN EN 14849:2006-02

DS/EN 14850:2006 气溶胶容器 孔径为 25.4 毫米的金属容器 接触高度的测量

This European Standard describes a method of measuring the contact height of the compression closure between the valve cup and the aperture of an aerosol container.This standard applies to aerosol containers with 25,4 mm apertures as specified in EN 14847 and prEN 15006 fitted with aerosol valve cups as specified in EN 14848.

Aerosol containers - Metal containers with 25,4 mm aperture - Measurement of contact height

DS/EN 14847:2006 气溶胶容器 马口铁容器 25.4 mm 孔径的尺寸

This European Standard specifies the following dimensions of tinplate metal aerosol cans with 25,4 mm aperture: contact height, outside diameter, inside diameter and shoulder height. It is intended to be used with EN 14848 for clinching with valve cups.

Aerosol containers - Tinplate containers - Dimensions of the 25,4 mm aperture

DS/EN 14854:2006 气雾剂容器 玻璃容器 瓶颈尺寸

This European Standard specifies the critical dimensions of the neck finish of glass aerosol containers with respect to the thorough and tight closing of valves with ferrules defined in EN 14849.This standard is applicable to a nominal diameter of 11 mm, 13 mm, 15 mm, 17 mm, 18 mm and 20 mm necked aerosol containers with moulded and tubular neck finishes.

Aerosol containers - Glass containers - Dimensions of the neck finish

DS/EN 14849:2006 气溶胶容器 玻璃容器 气溶胶阀套圈的尺寸

This European Standard defines the dimensions which are important for an effective fastening of valves on glass aerosol containers with a nominal diameter of 11 mm, 13 mm, 15 mm, 17 mm, 18 mm and 20 mm neck finish, as defined in EN 14854.

Aerosol containers - Glass containers - Dimensions of aerosol valve ferrules

DS/EN 14848:2006 气雾剂容器 孔径为 25.4 毫米的金属容器 阀杯的尺寸

This European Standard specifies the critical dimensions of valve cups suitable for clinching into 25,4 mm aperture metal aerosol containers.This standard is intended to be used with the metal aerosol containers specified in EN 14847 and prEN 15006.

Aerosol containers - Metal containers with 25,4 mm aperture - Dimensions of valve cups

EN 15007:2006 金属雾化剂容器.马口铁容器.两件或三件套容器尺寸

This European Standard specifies the dimensions of two and three-piece tinplate aerosol containers with nominal brimful capacities in accordance with European Directive 80/232/EEC [2].

Metal aerosol containers - Tinplate containers - Dimensions of two and three-piece cans

EN 15009:2006 空气溶胶容器.双层空气溶胶容器

This European Standard specifies the relationship between the nominal volume of product and the maximum nominal brimful capacity of the outer container of the compartmented aerosol container.

Aerosol containers - Compartmented aerosol containers

EN 15008:2006 雾化剂罐.铝罐.孔径尺寸25.4 mm的整体罐

This European Standard specifies the dimensions and volumes for one-piece aluminium aerosol containers with a 25,4 mm aperture in relation to the capacities fixed by European Directive 80/232/EEC [2]. This standard applies to one-piece containers of monobloc construction with an ogival, spherical or flat shoulder.

Aerosol containers - Aluminium containers - Dimensions of one-piece cans with 25,4 mm aperture

EN 15006:2006 金属雾化剂罐.铝罐.孔径尺寸25.4 mm

This European Standard specifies the following dimensions of aluminium metal aerosol cans with 25,4 mm aperture: contact height, outside diameter, inside diameter and shoulder height. It is intended to be used with EN 14848 for clinching with valve cups.

Metal aerosol containers - Aluminium containers - Dimensions of the 25,4 mm aperture

EN 15010:2006 空气溶胶容器.铝罐.与链扣连接的基准尺寸公差

This European Standard defines the critical dimensions of the location of the 25,4 mm aperture relative to the base of aerosol cans for clinching with valve cups. The specification of the fundamental dimensions in this standard, relates to all 25,4 mm aperture aluminium and aluminium alloy cans, irrespective of size, shape and mode of manufacture; whose dimensions and tolerances fall within the dimensional scope of EN 15008.

Aerosol containers - Aluminium containers - Tolerances of the fundamental dimensions in connection with the clinch

ASTM D4041-05 测定手动泵分配器喷雾模式的标准试验方法

This practice can be used to compare spray patterns of different pump dispensers and of different products. Spray patterns from pump dispensers will vary greatly with the design of the actuator and the nature of the liquid. Liquids with differing physical properties will not necessarily yield the same spray pattern when sprayed from the same actuator. Likewise, actuators of different designs will yield spray patterns distinct from each other when the same liquid is used.1.1 This test method covers the determination of spray patterns from pump dispensers. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Determining Spray Patterns of Manually Operated Pump Dispensers

ASTM D4336-05 用于确定机械泵分配器每卒中输出的标准测试方法

This test method can be used to compare the output per stroke of different pump dispensers for the purpose of establishing dosage and use instructions for products of consumer usage. This test method is suitable for establishing specifications for both the pump dispenser and the final package.1.1 These test methods cover the measurement of the mean quantity-by-weight of liquids dispensed from a mechanical pump dispenser (spray or flow type) with a consumer-type product on each actuation.1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Methods for Determination of the Output Per Stroke of a Mechanical Pump Dispenser

UL 147B-2005 丁烷气用一次性金属容器组件

These requirements cover nonrefillable (disposable) aerosol type metal container assemblies, charged with a commercial grade hydrocarbon fuel gas (primarily butane), constructed, charged, and marked in accordance with Code of Federal Regulations, Title 49, Specification 2P or 2Q. 1.2 Nonrefillable type metal container assemblies covered by these requirements are used with equipment for such purposes as, but not limited to, camping, cooking, heating, lighting, soldering, or brazing, and as covered in the following standards: a) Liquefied Petroleum Gas Code, NFPA 58-2004. b) Standard for Hand-Held Torches for Fuel Gases, UL 147. 1.3 These requirements do not cover DOT 39 specification cylinder assemblies covered by the requirements in the Standard for Nonrefillable (Disposable) Type Fuel Gas Cylinder Assemblies, UL 147A.

UL Standard for Safety Nonrefillable (Disposable) Type Metal Container Assemblies for Butane Third Edition; Reprint with Revisions Through and Including May 26, 2006