65.060.99 其他农业机械和设备 标准查询与下载

NY/T 1414-2007 大豆磨浆机质量评价技术规范

本标准规定了大豆磨浆机（以下简称磨浆机）产品质量评价指标、检测方法和检验规则。 本标准适用于磨浆机产品质量评定。

Technical Specification of Quality Evaluation for Soybean Milk Milling Machine

IEC 60335-2-70:2002+AMD1:2007 CSV 家用和类似用途电器的安全第2-70部分:挤奶机的特殊要求

Household and similar electrical appliances - Safety - Part 2-70: Particular requirements for milking machines

DS/ISO 15003:2007 农业工程 电气和电子设备 耐环境条件测试

This International Standard provides design guidance for the manufacturers of electrical and electronic equipment for use in all kinds of mobile (including hand held) agricultural machinery, forestry machinery, landscaping and gardening machinery [referred to hereafter as machine(s)]. It gives tests for specific environmental conditions and defines severity levels for tests which relate to the environmental extremes that may be experienced in practical operation of the equipment.

Agricultural engineering - Electrical and electronic equipment - Testing resistance to environmental conditions

IEC 60335-2-70:2002/AMD1:2007 修改件1.家用和类似用途电器.安全.第2-70部分:挤奶机的特殊要求

Amendment 1 - Household and similar electrical appliances - Safety - Part 2-70: Particular requirements for milking machines

DB44/T 401-2007 可控光降解聚乙烯农用地膜

本标准规定了可控光降解聚乙烯农用地膜的术语和定义、产品分类、技术要求、试验方法、检验规则以及标志、包装、运输和贮存。本标准适用于以低密度乙树脂（LDPE)、线性低密度聚乙烯树脂（LLDPE)、高密度聚乙烯树脂（HDPE）、以上两者或者共混，同时加入适量的光降解成分。用吹塑工艺生产的可控光降解农用地膜。

Controllable photodegradable polyethylene agricultural mulch film

DS/ISO 11783-8:2006 农林用拖拉机和机械 串行控制和通信数据网络 第8部分：动力传动系信息

This part of ISO 11783 specifies a serial data network for control and communications on forestry oragricultural tractors, mounted, semi-mounted, towed or self-propelled implements. This part of ISO 11783 describes the messages required by tractors and self-propelled implements.

Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 8: Power train messages

SC/T 6025-2006 水下清淤机

本标准规定了水下清淤机的型式、技术要求、试验方法、检验规则、标志、包装、运输及储存。 本标准适用于清除池底较平坦（主要是人工开挖池塘）的池塘淡水养殖水域底层淤泥的种类水下行走式清淤机。

Submersible pond silt remover

NY/T 1251-2006 蚕茧干燥设备

本标准规定了蚕茧干燥设备的型号标记、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于多种热源的连续式干爆机和批次式烘茧灶。

Silkworm cocoon drying equipment

CAN/CSA-E60335-2-70-2006 家用和类似用途电器《安全》第2-70部分：挤奶机的特殊要求（第二版）

Household and similar electrical appliances – Safety – Part 2-70: Particular requirements for milking machines (Second Edition)

ANSI/ASAE S354.5-2006 农场及其建筑物设施的安全性

Provides a reasonable degree of personal safety for operators and other persons during normal operation and servicing of farmstead equipment. It does not apply to agricultural field equipment nor to self-propelled mobile equipment such as motor vehicles, all terrain vehicles, skid-steer loaders, or farmstead equipment covered by other ASABE safety standards unless it is specifically referenced by these standards.

Safety for Farmstead Equipment

NY/T 1011-2006 扒谷输送机质量评价规范

本标准规定了扒谷输送机的产品质量指标、实验方法和检验规则。 本标准适用于扒谷输送机的产品质量评价。

Quality appraising standard for rake grain and belt conveyer

NY/T 1005-2006 移动式粮食干燥机质量评价技术规范

本标准规定了移动式粮食干燥机的质量指标、试验方法和检验规则。 本标准适用于移动式粮食干燥机（以下简称移动式干燥机）的产品质量评定。

Mobile grain drier quality evaluation technical specification

ANSI B71.3-2005 室外动力设备.扫雪机.安全规范

The safety specifications in this standard apply to (a) walk-behind power snow throwers, (b) ride-on power snow throwers, (c) lawn ride-on tractors with snow thrower attachments, (d) lawn and garden tractors with snow thrower attachments, and (e) lever-s

Outdoor Power Equipment - Snow Throwers - Safety Specifications

DB44/T 204-2004 荔枝、龙眼干燥设备 技术条件

本标准规定了荔枝、龙眼干燥设备的术语和定义、技术要求、检验规则、标志、包装、运输及贮存。本标准适用于间接加热方法对荔枝、龙眼进行干燥的干燥设备（以下简称设备）。

Litchi and longan drying equipments Specifications

BS EN 703:2004 农业机械.青饲料装载、搅拌和/或切碎机和分配机器.安全

This document, used together with EN 1553, specifies the safety requirements and their verification for the design and construction of mounted, semi-mounted, trailed or self-propelled machines that have a combination of two or more of the following functions: loading, mixing, chopping and distributing silage and/or other feedstuffs, to be used by one operator only, it includes those fitted with a built-in loading crane. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer. This document applies only to machines that have the following functional combinations: — mixing and distributing functions; or — mixing, chopping and distributing functions; or — loading, mixing and distributing functions; or — loading, mixing, chopping and distributing functions; or — chopping and distributing functions; or — loading, chopping and distributing functions. Silage block cutters, even if they carry out a single function, are covered by this document. It does not apply: — to machines which pick up green fodder directly from the field; — to loading cranes; — to silage buckets. NOTE 1 Loading cranes are dealt with in EN 12999. NOTE 2 Silage buckets will be dealt through an amendment or during next revision. This document deals with all the significant hazards, hazardous situations and events relevant to machines for loading, mixing and/or chopping and distributing silage and/or other feedstuffs, when they are used as intended and under the conditions foreseen by the manufacturer as listed in clause 4, except for the hazards arising from: — failure of the control circuit; — inadequate seating; — inadequate lighting; — impossibility of stopping the machine in the best possible conditions; — travelling of machinery; — break-up of parts rotating at high speed. It is not applicable to environmental hazards (except noise). This document is not applicable to machines for loading, mixing and/or chopping and distributing silage and/or other feedstuffs which are manufactured before the date of publication of this document by CEN.

Agricultural machinery - Silage loading, mixing and/or chopping and distributing machines - Safety

BS EN 703:2004+A1:2009 农业机械.青贮饲料装载,混合和/或切碎及分配机械.安全性

This document, used together with EN 1553, specifies the safety requirements and their verification for the design and construction of mounted, semi-mounted, trailed or self-propelled machines that have a combination of two or more of the following functions: loading, mixing, chopping and distributing silage and/or other feedstuffs, to be used by one operator only. It includes those fitted with a built-in loading crane. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer. This document applies only to machines that have the following functional combinations:  mixing and distributing functions; or  mixing, chopping and distributing functions; or  loading, mixing and distributing functions; or  loading, mixing, chopping and distributing functions; or  chopping and distributing functions; or  loading, chopping and distributing functions. Silage block cutters, even if they carry out a single function, are covered by this document. It does not apply:  to machines which pick up green fodder directly from the field;  to loading cranes;  to silage buckets. NOTE 1 Loading cranes are dealt with in EN 12999. NOTE 2 Silage buckets will be dealt through an amendment or during next revision. This document deals with all the significant hazards, hazardous situations and events relevant to machines for loading, mixing and/or chopping and distributing silage and/or other feedstuffs, when they are used as intended and under the conditions foreseen by the manufacturer as listed in clause 4, except for the hazards arising from:  failure of the control circuit;  inadequate seating;  inadequate lighting;  impossibility of stopping the machine in the best possible conditions;  travelling of machinery;  break-up of parts rotating at high speed. It is not applicable to environmental hazards (except noise). This document is not applicable to machines for loading, mixing and/or chopping and distributing silage and/or other feedstuffs which are manufactured before the date of publication of this document by CEN.

Agricultural machinery - Silage loading, mixing and/or chopping and distributing machines - Safety

EN 703:2004 农业机械.青饲料装载,搅拌和/或切碎机和分配机器的安全性.包含修改件A1-2009

This document, used together with EN 1553, specifies the safety requirements and their verification for the design and construction of mounted, semi-mounted, trailed or self-propelled machines that have a combination of two or more of the following functions: loading, mixing, chopping and distributing silage and/or other feedstuffs, to be used by one operator only. It includes those fitted with a built-in loading crane. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer.This document applies only to machines that have the following functional combinations: mixing and distributing functions; or mixing, chopping and distributing functions; or loading, mixing and distributing functions; or loading, mixing, chopping and distributing functions; or chopping and distributing functions; or loading, chopping and distributing functions. Silage block cutters, even if they carry out a single function, are covered byThis document. It does not apply: to machines which pick up green fodder directly from the field; to loading cranes; to silage buckets. NOTE 1 Loading cranes are dealt with in EN 12999. NOTE 2 Silage buckets will be dealt through an amendment or during next revision.This document deals with all the significant hazards, hazardous situations and events relevant to machines for loading, mixing and/or chopping and distributing silage and/or other feedstuffs, when they are used as intended and under the conditions foreseen by the manufacturer as listed in clause 4, except for the hazards arising from: failure of the control circuit; inadequate seating; inadequate lighting; impossibility of stopping the machine in the best possible conditions; travelling of machinery; break-up of parts rotating at high speed. It is not applicable to environmental hazards (except noise).This document is not applicable to machines for loading, mixing and/or chopping and distributing silage and/or other feedstuffs which are manufactured before the date of publication of this document by CEN.

Agricultural machinery - Silage loading, mixing and/or chopping and distributing machines - Safety (Incorporates Amendment A1: 2009)

DB44/T 174-2003 手扶拖拉机配套水田驱动耙试验鉴定规范

本标准规定了手扶拖拉机配套水田驱动耙的试验条件、性能试验和生产试验的方法。本标准适用于手扶拖拉机配套水田驱动耙（以下简称驱动耙）。手扶拖拉机配套水田埋草旋耕机的常规试验可参照本标准进行。

Driving paddy harrow fitted on walking tractors-Testing methods

NY/T 262-2003 天然橡胶初加工机械.绉片机

Machinery for primary processing of natural rubber.Crepper

NY/T 737-2003 木薯淀粉加工机械通用技术条件

本标准规定了木薯淀粉加工機械產品的通用基本技术要求。 本标准适用于木薯淀粉加工中的输送、清洗 粉碎、搅拌.筛分等机械。其他昔类淀粉加工机械可参 照使用。

General technical requirements for processing machinery of cassava starch