65.145 狩猎 标准查询与下载

ASTM F2337-18 Treestand防坠系统的标准试验方法

Standard Test Method for Treestand Fall Arrest System

KS G 5707-2017 射击炮弹枪

Shots for shot gun cartridges

KS G 5707-2017(2022) 霰弹枪子弹的射击

Shots for shot gun cartridges

KS G 5705-2017(2022) 射击枪

Shot guns

KS G 5705-2017 射击枪

Shot guns

ASTM F2275-17 Treestand制造商质量保证计划的标准实践

Standard Practice for Treestand Manufacturer Quality Assurance Program

GSO ISO 10990-5:2016 动物（哺乳动物）陷阱 第5部分：约束陷阱的测试方法

1.1 This part of ISO 10990 specifies methods for use in performance testing of traps used on land to restrain mammals. The performance testing includes methods for evaluation of trauma, selectivity, capture efficiency and user safety. 1.2 It is recognized that injury is only one component of animal welfare. However, there are insufficient data collected in a scientific manner on the additional components to allow for the complete assessment of animal welfare. Several areas of investigation are presented for evaluation in annex A. Selection of the data collection methodology is left to the investigator. However, it is assumed that such collection methods will follow accepted practices. It should also be understood that data collected in any, or all, of the suggested areas will probably not provide an absolute measure of welfare. Rather, the compilation of such data over time should provide a mechanism for comparing the relative animal welfare impacts of different restraint methods.

Animal (mammal) traps -- Part 5: Methods for testing restraining traps

GSO ISO 10990-4:2016 动物（哺乳动物）陷阱 第4部分：陆地或水下使用的捕杀陷阱系统的测试方法

This part of ISO 10990 specifies methods for use in performance testing of: — traps used on land to kill mammals; — traps used in submersion sets to kill semi-aquatic mammals. The performance testing includes methods for evaluation of effective killing, pathological evaluation, mechanical properties (see note), selectivity, capture efficiency and user safety. NOTE ISO/TC 191 recognizes that other trapping systems are under development but are at a preliminary stage. Consequently, inclusion of appropriate mechanical tests for such traps is premature at this time. Nevertheless, the committee recommends and supports the development of new types of traps and trapping systems together with appropriate testing methodologies. ISO/TC 191 further recommends that the issue receives in-depth (re)consideration at the five-year review and that all appropriate advances in technology are incorporated through the deliberations of the committee at that time.

Animal (mammal) traps -- Part 4: Methods for testing killing-trap systems used on land or underwater

ANSI/ASTM F2337:2016 Treestand 防坠落系统的标准测试方法

Standard Test Method for Treestand Fall Arrest System

KS B ISO 10990-4-2013 动物（哺乳动物）诱捕器 第4部分：陆地或水下捕杀捕集系统的测试方法

Animal(mammal) traps－Part 4：Methods for testing killing-trap systems used on land or underwater

KS B ISO 10990-5-2013 动物（哺乳动物）诱捕器 第5部分：约束性诱捕器试验方法

Animal(mammal) traps－Part 5：Methods for testing restraining traps

KS B ISO 10990-5:2013 动物（哺乳类）诱捕 第5部分：围猎诱捕的试验方法

Animal(mammal) traps－Part 5：Methods for testing restraining traps

KS B ISO 10990-4:2013 动物（哺乳类）诱捕器 第4部分：陆地或水下诱捕杀系统的试验方法

Animal(mammal) traps－Part 4：Methods for testing killing-trap systems used on land or underwater

ANSI/ASTM F2337:2011 树顶支架阻止落下系统的试验方法

Test Method for Treestand Fall Arrest System

LY/T 1562-2010 狩猎场总体设计规范

本标准规定了狩猎场设计总则，狩猎业资源评估，狩猎场分类、分级与管理，狩猎场工程建设指导原则及狩猎场总体设计文件规范等。 本标准适用于全国已建、改建和新建的各种类型的狩猎场。

Master design code for hunting ground

ASTM F2275-10(2014) 木质平台生产厂质量保证大纲的标准实施规程

3.1 The purpose of this practice is to provide the minimum requirements necessary for the establishment of a written quality assurance program for treestands and elevated hunting equipment. 1.1 This practice provides minimum requirements for a quality assurance program. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Treestand Manufacturer Quality Assurance Program

ASTM F2275-10 树架制造商质量保证计划的标准实施规程

The purpose of this practice is to provide the minimum requirements necessary for the establishment of a written quality assurance program for treestands and elevated hunting equipment. The purpose of this practice is to provide the minimum requirements necessary for the establishment of a written quality assurance program for treestands and elevated hunting equipment.1.1 This practice provides minimum requirements for a quality assurance program. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Treestand Manufacturer Quality Assurance Program

ASTM F2337-10 Treestand防跌落系统的标准试验方法

This test method is intended to measure the maximum arrest force and dynamic strength on treestand FAS and components or subsystems. This test is intended for program quality assurance and production quality control purposes. It is not intended to be an independent material or product acceptance test.1.1 This test method covers the determination of the load capacities for treestand fall arrest systems (FAS) and components or subsystems. 1.2 This test method addresses equipment used in hunting situations requiring personal protection against falls from heights and applies to the manufacturers, distributors, purchasers, and users of such equipment. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Treestand Fall Arrest System

ASTM F2337-08 Treestand防坠系统的标准试验方法

This test method is intended to measure the maximum arrest force and dynamic strength on treestand FAS and components or subsystems. This test is intended for program quality assurance and production quality control purposes. It is not intended to be an independent material or product acceptance test.1.1 This test method covers the determination of the load capacities for treestand fall arrest systems (FAS) and components or subsystems. 1.2 This test method addresses equipment used in hunting situations requiring personal protection against falls from heights and applies to the manufacturers, distributors, purchasers, and users of such equipment. 1.3 The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Treestand Fall Arrest System

KS B ISO 10990-5-2003(2008) 动物（哺乳动物）诱捕器第5部分:抑制诱捕器试验方法

Animal(mammal) traps－Part 5：Methods for testing restraining traps