71.020 化工生产 标准查询与下载
共找到 299 条与 化工生产 相关的标准，共 20 页
Technical Requirements for Safety Early Warning Information System of Coal Chemical Industry Enterprises
- ICS
- 71.020
- CCS
- G09
- 发布
- 2010-12-30
- 实施
- 2011-01-01
本标准规定了联合制碱法纯碱（联合制碱法以下简称联碱）单位产品能源消耗（能源消耗以下简称 能耗）限额的核算范围、基本方法及限额指标。本标准适用于联合制碱法纯碱生产企业进行能耗的计算、控制和考核。
Comprehensive energy consumption limit per unit product of soda ash (combined soda method)
- ICS
- 71.020
- CCS
- G00
- 发布
- 2010-07-27
- 实施
- 2010-10-01
Guidance to safe handling of manufactured nanomaterials in workplace/laboratory
- ICS
- 71.020
- CCS
- 发布
- 2009-05-06
- 实施
이 지침은 나노물질을 취급하는 작업장 또는 연구실에 적용될 수 있으며, 국가연구기관이나 공
Guidance to safe handling of manufactured nanomaterials in workplace/laboratory
- ICS
- 71.020
- CCS
- A90
- 发布
- 2009-05-06
- 实施
- 2009-05-06
Basic considerations for the safety of hydrogen systems
- ICS
- 71.020
- CCS
- 发布
- 2008-09
- 实施
Describes storage and handling of silane and silane mixtures including practical methods applicable for silane manufacturers, suppliers and end users. G-13 addresses cylinder and bulk silane delivery systems for the semiconductor user community; including storage and handling at the user site and guidelines for the interconnecting piping system up to the distribution piping in the manufacturing facility. Setback distances are recommended based on heat radiation as well as overpressure produced by blast effects due to delayed ignitio
Storage and Handling of Silane and Silane Mixtures
- ICS
- 71.020
- CCS
- G04;A87;C66
- 发布
- 2006-08-16
- 实施
本规定适用于一切新建、扩建、改建和技术改造的化工建设项目，包括中外合资、中外合作、外商独资和引进项目以及国际金融组织贷款项目和乡镇、街道、个体经营的化工建设项目(以下简称化工建设项目)。
Provisions on engineering design of environmental protection of chemical industry projects
- ICS
- 71.020
- CCS
- P72;Z61
- 发布
- 2005-07-10
- 实施
- 2006-01-01
Water intake quota and calculation method for unit product in dye industry
- ICS
- 71.020
- CCS
- G01
- 发布
- 2003-03-01
- 实施
- 20030301
The risk-based corrective action (RBCA) process presented in this guide is a consistent, streamlined decision process for selecting corrective actions at chemical release sites. Risk assessment is a developing science. The scientific approach used to develop the RBSL and SSTL may vary by regulatory agency and by user due to regulatory requirements, guidance and use of alternative scientifically-based methods. Activities described in this guide should be conducted by persons familiar with current site characterization techniques, remedial action science and technology, current human health risk and exposure assessment methodologies, toxicology, and current ecological evaluation methodologies. In order to properly apply the RBCA process, the user should AVOID the following: Prescribing Tier 1 RBSL or RESC as remedial action standards for all sites rather than screening levels, Limiting use of the RBCA process to Tier 1 evaluation only and not continuing with Tier 2 or Tier 3 analyses for sites where further tier evaluation is appropriate, Placing arbitrary time constraints on the corrective action process; for example, requiring that Tiers 1, 2, and 3 be completed within time periods that do not reflect the actual urgency of and risks posed by the site, Using the RBCA process only when active remedial action is not technically feasible, rather than as a process that is applicable during all phases of corrective action, Conducting active remedial action to achieve only technology-based remedial limits (for example, asymptotic levels) prior to determining applicable corrective action goals, Using predictive modeling that is not supported by available data or knowledge of site conditions, Limiting remedial action options to a single class of remedial actions for all sites, Using unjustified or inappropriate exposure factors, Using unjustified or inappropriate toxicity parameters, Failing to consider cumulative risks and additive effects when evaluating multiple chemicals, Excluding the evaluation of options for activity and use limitations, point(s) of exposure, point(s) of demonstration, sequencing remedial action activities at multiple sites on the same facility, or risk levels, Excluding the maintenance and monitoring of activity and use limitations, Failing to consider the long-term effectiveness and reliability of potential remedial action options, Failing to evaluate potential risks to the public, to workers and to relevant ecological receptors and habitats that may be created by proposed remedial actions or assessment methods and Continuing monitoring or remedial action at sites that have achieved the corrective action goals (unless monitoring is specifically required for an activity and use limitation or another regulatory requirement). Achievement of corrective action goals is predicated on sufficient monitoring to substantiate the site conditions. The RBCA process described in this guide includes several features that are only examples of standardized approaches to addressing the objectives of the particular activity, for example, the response action evaluation table and the exposure scenario evaluation flowchart. These elements should be customized by the user based on the constraints of the site or group of sites being addressed and the appropriate technical policy decisions. The objectives of the analyses are identified in this guide. 1.1 This is a guide for conducting risk-based corrective action (RBCA) at chemical release sites based on protecting human health and the environment. The RBCA is a consistent decision-making process for the assessment and response to chemical releases. Chemical release sites vary greatly in terms of complexity, physical and chemical characteristics, and......
Standard Guide for Risk-Based Corrective Action
- ICS
- 71.020
- CCS
- A00
- 发布
- 2000
- 实施
1.O.1 为贯彻执行《中华人民共和国进出口商品检验法》，维护国家经济权益，以合同为依据实施化工建设项目进口设备、材料的检验特制定本标准。 1.O.2 本标准适用于化工建设项目的成套、单项、单机进口的机器，静置设备，电气、工业自动化仪表，工业控制计算机等设备和材料及其文件、资料，自合同生效日起至机械保证期终止日为止的国外检验、国内口岸检验，开箱检验与质量检验。本标准亦适用于由 国外承包商负责采购供应的中国制造厂制造的设备、材料的检验。 1.O.3 本标准为进口设备、材料检验的通用规定。各化工建设项目应根据具体装置和合同环境等特点，编制相应的检验方案或细则。 1.O.4 合同中规定的或由买方确认的卖方和制造厂提供的技术标准、规范和检验规范应是执行检验的技术依据。经买卖双方确认的设计文件、技术资料及图纸上指定的标准、规范和技术要求应为具体设备、材料的检验依据。 1.O.5 当卖方提供的标准、规范不全或不能满足检验的需要时，经买卖双方协商可采用相应的国际标准、国外先进标准、产品制造厂标准或我国现行标准。 1.O.6 在化工项目进口设备、材料检验中，有关安全、劳动保护、环境保护、工业卫生、防火、防爆等规定，必须符合我国现行法规和标准的规定。 1.O.7 本标准应与《化工建设项目进口设备、材料检验管理办法》配合使用。
General Rules for Inspection of Imported Equipment and Materials for Chemical Industrial Construction Projects
- ICS
- 71.020
- CCS
- G04
- 发布
- 1993-03-17
- 实施
- 1993-08-01
1.0.1 根据《工业企业噪声控制设计规范》及《化工建设项目环境保护设计规定》制定本规定。 1.0.2 本规定的根本任务是：使化工建设项目的设计遵循《中华人民共和国环境噪声污染防治条例》，贯彻执行环境保护和劳动保护方针、政策，严格控制噪声污染，保障职工的身心健康，保护和改善工厂及周围的声学环境。 1.0.3 本规定适用于化工企业的新建、扩建、改建及技术改造项目的噪声控制设计(脉冲噪声除外)。 1.0.4 化工建设项目、的噪声控制设计除执行本规定外，尚应符合国家现行的其他有关标准、规范的规定。
Noise Control Design Regulations for Chemical Construction Projects
- ICS
- 71.020
- CCS
- G00
- 发布
- 1992-05-25
- 实施
- 1992-09-01
1.O.1 本规定根据(87)国环字第002号关于颁发《建设项目环境保护设计规定》、《全国环境监测管理条例》及现行的《化学工业环境保护监测工作规定》等文件制定。 1.O.2 化学工业环境保护监测站的任务是：对生产过程中产生的污染物及噪声进行监测，为各级化工主管部门和企业贯彻执行国家环保法规，制定防治污染对策，编制环保规划，强化管理等方面提供可靠的依据。 1.O.3 本规定适用于一切化工新建、扩建、改建和技术改造项目，包括外资、中外合资和引进项目(统称化工建设项目)。 1.0.4 贯彻执行化工企业环境保护监测站的机构建设(站或组)应与主体工程同时设计、同时施工、同时投产使用的"三同时"规定。
Regulations on Design of Environmental Protection Monitoring Stations of Chemical Enterprises
- ICS
- 71.020
- CCS
- G00
- 发布
- 1992-05-25
- 实施
- 1992-09-01
1.1爆炸和火灾危险环境的电力装置设计，必须认真执行国家的技术经济政策，并应贯彻以防为主的方针，因地制宜地采取了措施，做到保障国家和人民生命财产的安全，技术先进，经济合理。 1.2本规程适用于新建、扩建和改建的爆炸和火灾危险环境的电力设计。 本规程不适用于下列环境和装置： (1)矿井井下； (2)制造、使用或贮存爆炸性物质(如火药、炸药和起爆药等)的地方； (3)利用电能进行生产并与生产工艺过程直接关联的电解，电镀，蓄电池等电气装置； (4)使用强氧化剂(如氯、臭氧等)以及不用外来点火源就能自行起火的物质(如金属钠、钾、黄磷等)； (5)水、陆交通运输工具。 1.3爆炸和火灾危险环境电力设计，尚应符合现行的有关国家标准和规范的规定。
Code for design of electric power in explosive and fire hazardous environments in chemical enterprises
- ICS
- 71.020
- CCS
- G01
- 发布
- 1989
- 实施
- 1989-06
Chemical industries. Precautions concerning the use of perchloric acid in laboratories.
- ICS
- 71.020
- CCS
- G04
- 发布
- 1964-12-01
- 实施
Regulations on Design of Environmental Protection Monitoring Stations of Chemical Enterprises
- ICS
- 71.020
- CCS
- G00
- 发布
- 实施
Provisions on engineering design of environmental protection of chemical industry projects (explanation)
- ICS
- 71.020
- CCS
- P72;Z61
- 发布
- 实施
Design rules for metering, packaging and palletizing systems of chemical powder products
- ICS
- 71.020
- CCS
- G08
- 发布
- 实施
Noise Control Design Regulations for Chemical Construction Projects
- ICS
- 71.020
- CCS
- G00
- 发布
- 实施
