75.160 燃料 标准查询与下载

SH/T 0934-2016 石油焦中痕量金属元素的测定 波长色散X射线荧光光谱法

Determination of trace metal elements in petroleum coke by wavelength dispersive X-ray fluorescence spectrometry

NB/T 13004-2016 生物燃料乙醇用活性干酵母

Active dry yeast for biofuel ethanol

NB/T 13005-2016 用于生物燃料乙醇制备的纤维素酶酶活力测定方法

Cellulase enzyme activity determination method for biofuel ethanol production

KS M 2620-2015 副产燃料油

By-product fuel oil

KS M 2620-2015(2020) 副产品燃料油

By-product fuel oil

NB/SH/T 0908-2015 重质燃料油和原油稳定性及相容性的测定.光学检测法

本标准规定了沥青质絮凝的滴定和光学检测自动方法，用于测定石油炼制的渣油物料、残渣燃料油和原油的稳定性和相容性参数。本标准适用于来自常压和减压蒸馏、热加工、催化和加氢裂化过程的渣油，如符合GB 25989-2010产品分类中的F-R1、F-R2、F-R3和F-R4级别的样品，GB/T 29114-2012产品分类中的包含石油炼制中重组分的石油燃料样品，以及原油。本标准不适用于沥青质质量分数小于0.05%的样品，并且对于已经发生沥青质絮凝的不稳定样品得不到滴定终点。

Standard test method for determining stability and compatibility of heavy fuel oils and crude oils by heavy fuel oil stability analyzer (optical detection)

NB/T 10020-2015 煤层气的取样和组分分析方法

Coalbed methane sampling and component analysis methods

DB11/T 1093-2014 液化天然气汽车箱式橇装加注装置安全技术要求

Safety technical requirements for box-type skid-mounted filling devices for LNG vehicles

DB11/ 1093-2014 液化天然气汽车箱式橇装加注装置安全技术要求

Safety technical requirements for box-type skid-mounted filling devices for LNG vehicles

NB/T 34013-2013 农用醇醚柴油燃料

本标准规定了农用醇醚柴油燃料的产品分类,技术要求和检验方法,检验规则,标志、包装、运输、贮存及交货验收,安全等。本标准规定的产品,由液体混合醇、醚类、脂肪酸甲酯等为配料,与石化柴油混配而成,或加有添加剂,适用于农用动力机械。

Alcohol-ether diesel fuel for agricultural machines

DB52/T 838-2013 液化二甲醚钢瓶定期检验与评定

Regular inspection and evaluation of liquefied dimethyl ether cylinders

JIS K 2180-5:2013 燃料用二甲基乙醚(DME).第5部分:总硫含量测定.紫外荧光法

Dimethylether (DME) for fuels -- Part 5: Determination of total sulfur -- Ultraviolet fluorescence method

JIS K 2180-4:2013 燃料用二甲基乙醚(DME).第4部分:蒸发残留物测定.质量分析法

Dimethylether (DME) for fuels.Part 4: Determination of evaporation residues.Mass analysis method

JIS K 2180-6:2013 燃料用二甲基乙醚(DME).第6部分:总硫含量测定.氧化微库伦分析法

Dimethylether (DME) for fuels.Part 6: Determination of total sulfur.Oxidative microcoulometry method

JIS K 2180-3:2013 燃料用二甲基乙醚(DME).第3部分:水含量测定.卡尔费歇尔滴定法

Dimethylether (DME) for fuels -- Part 3: Determination of water content -- Karl Fischer titration method

JIS K 2180-1:2013 燃料用二甲基乙醚(DME).第1部分:规格

Dimethylether (DME) for fuels.Part 1: Specifications

JIS K 2180-2:2013 燃料用二甲基乙醚(DME).第2部分:杂质测定.气相色谱法

Dimethylether (DME) for fuels.Part 2: Determination of impurities.Gas chromatographic method

GPA STD 2261-2013 用气相色谱法分析天然气和类似气体混合物

本标准包括以下各项的测定： 使用气相色谱仪（GC）测定表1所列范围内天然气和类似气体混合物的化学成分。这三列表示原始表1，但将值分为三个不同的组。第一组浓度低于循环项目（RR-188）获得的数据。 第二组是循环项目（RR-188）中使用的浓度。在该标准中的精度声明中列出的方程覆盖了在离群值被去除之后在中间列中列出的范围。第三组浓度高于循环项目（RR-188）获得的数据。 This standard covers the determination of the chemical composition of natural gas and similar gaseous mixtures within the ranges listed in Table 1, using a Gas Chromatograph (GC). The three olumns represent the original Table 1, but separate the values to three distinct groups. The first group is concentrations lower than the data obtained from the round-robin project (RR-188). The second group is concentrations used in the roundrobin project (RR-188). The equations listed in the precision statement in this standard cover the range listed in the middle column, after outliers were removed. The third group is concentrations higher than the data obtained from the round-robin project (RR-188).

Analysis for Natural Gas and Similar Gaseous Mixtures by Gas Chromatography

CAN/CGSB-3.2-2011 取暖燃油

1. SCOPE 1.1 This standard applies to three types of middle distillate fuel oils that are suitable for use in liquid-fuel-burning equipment without preheating (Types 0, 1 and 2), and three types of fuel oils that contain residual fuel components and require preheating (Types 4, 5 and 6). 1.2 The heating fuel oils covered by this standard are intended for use in oil burning equipment to generate heat for domestic and industrial purposes. 1.2.1 Types 0, 1 and 2 fuel oils are primarily for use in domestic-type oil burners. They may also be used for some industrial purposes. a. Type 0 fuel oil is intended for use in fuel oil burning appliances that have outside storage and where ambient temperatures as low as -48°C could be encountered. b. Type 1 fuel oil is intended primarily for use in sleeve-type and wick-feed burners, and in most vaporizing pot-type burner applications. It is also intended for atomizing burners in which Type 2 fuel oil cannot be used satisfactorily. During periods of lower ambient temperature, Type 1 fuel oil may be used in place of Type 2 to minimize waxing problems. c. Type 2 fuel oil is a heavier distillate than Type 1 and is intended for use in most atomizing-type burner applications. This type of fuel oil is used in most domestic burners (furnaces and boilers) and in some medium capacity commercial and industrial burners. Type 2 may contain up to 5% biodiesel. 1.2.2 Types 4, 5 and 6 fuel oils are primarily for use as industrial fuels: suitable for use in the pulp and paper industry, metallurgical operations, heat or power generation, etc. a. Type 4 is an industrial fuel oil intended primarily for burner installations equipped with limited preheating facilities or with no preheating. b. Type 5 is a residual fuel oil for burner installations equipped with limited preheating facilities that require a fuel oil of lower viscosity than Type 6. c. Type 6 is a high-viscosity residual fuel oil for use in burners equipped with preheating facilities to handle such fuels. 1.3 The testing and evaluation of a product against this standard may require the use of materials and/or equipment that could be hazardous. This document does not purport to address all the safety aspects associated with its use. Anyone using this standard has the responsibility to consult the appropriate authorities and to establish appropriate health and safety practices in conjunction with any applicable regulatory requirements prior to its use.

HEATING FUEL OIL

GWKB 1.1-2011 车用汽油有害物质控制标准（第四、五阶段）

本标准规定了车用汽油中对机动车排放控制性能、人体健康和生态环境有不利影响的有害物质含量和环保性能控制指标。 本标准适用于车用汽油和车用乙醇汽油（E10）。

Hazardous materials control standard for motor vehicle gasoline(Ⅳ,Ⅴ)