77.140.01 钢铁产品综合 标准查询与下载

DS/EN 10025-4:2005 结构钢热轧产品 第4部分：热机械轧制可焊细晶粒结构钢交货技术条件

Part 4 of this document, in addition to Part 1, specifies requirements for flat and long products of hot rolled weldable fine grain structural steels in the thermomechanical rolled condition in the grades and qualities given in Tables 2 to 4 (chemical composition) and Tables 5 to 7 (mechanical properties) in thickness 120 mm for flat products and in thickness 150 mm for long products.

Hot rolled products of structural steels - Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels

DS/EN 10025-5:2005 结构钢的热轧产品 第5部分：改进耐大气腐蚀结构钢的交货技术条件

Part 5 of this document, in addition to part 1, specifies requirements for flat and long products of hot rolled steels with improved atmospheric corrosion resistance in the grades and qualities given in Tables 2 and 3 (chemical composition) and Tables 4 and 5 (mechanical properties) in the usual delivery conditions as given in 6.3.

Hot rolled products of structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance

ABNT NBR NM 122-1-2005 工具钢第1部分-分类，名称和化学成分

Tool steel Part 1- Classification, designation, and chemical composition

AWS GTW-2005 碳和低合金钢可焊性指南

Selection of the correct fillet weld size is essential for the satisfactory performance of many weldments in service today. Fillet welds are used in virtually every industry, and when properly designed, provide effective and efficient connections

Guide to Weldability Carbon and Low Alloy Steels

DS/EN 10168:2004 钢材 检验文件 信息和描述清单

This standard lists the information that may be communicated in and includes a brief description of the inspection documents of steel products as described in EN 10204. By laying down standardized designations and definitions for information likely to appear in inspection documents and by introducing code numbers for each of the designated sections, this European Standard intends to contribute to the elimination of communication difficulties in European trade.

Steel products - Inspection documents - List of information and description

AS 2338:2004 锻造金属制品的首选尺寸

Specifies the preferred sizes, or dimensions, of wrought metal products manufactured from steel (hot-rolled and bright), copper, copper alloys, aluminium and aluminium alloys.

Preferred dimensions of wrought metal products

JIS G 3101:2004 普通结构用轧制钢材

この規格は，橋，船舶，車両その他の構造物に用いる一般構造用の熱間圧延鋼材(以下，鋼材という。)について規定する。

Rolled steels for general structure

JIS G 3125:2004 高级耐大气腐蚀轧制钢材

この規格は，車両，建築，鉄塔その他の構造物に用いる高い耐候性をもつ圧延鋼材（以下，鋼材という。）について規定する。

Superior atmospheric corrosion resisting rolled steels

JIS G 3114:2004 焊接结构用耐大气腐蚀热轧钢材

この規格は，橋，建築，その他の構造物に用いる溶接性を考慮した耐候性熱間圧延鋼材（以下，鋼材という。）について規定する。

Hot-rolled atmospheric corrosion resisting steels for welded structure

JIS G 3106:2004 焊接结构用轧制钢材

この規格は橋，船舶，車両，石油貯槽，容器その他の構造物に用いる熱間圧延鋼材(以下，鋼材という。)であって，特に溶接性の優れたものについて規定する。

Rolled steels for welded structure

GOST R 52222-2004 自动焊接用熔炼焊剂.规范

Fused fluxes for automatic welding. Specifications

ISO 630:1995/Amd 1:2003 结构钢.板材 宽扁钢 棒材 型材和型材.修改件1

Structural steels — Plates, wide flats, bars, sections and profiles — Amendment 1

SAE AMS2489-2003 钢材黑度补漆法

This specification covers the requirements for an inorganic black coating applied at ambient temperature to steel to touch up black oxide coating in areas where the black oxide has been removed. This coating is intended only to visually change the surface to a black color, not to meet the requirements of any black oxide specification.

Blackening of Steel, Touch Up Method

CNS 13812-2003 建筑结构用轧钢料

本标准适用于建筑结构用热轧钢料（以下简称钢料）

Rolled steels for building structure

ASTM A1012-02 无缝和焊接铁素体 奥氏体和双相合金钢冷凝器和带有整体式金属丝的热交换管的标准规范

1.1 This specification describes seamless and welded ferritic, austenitic and duplex alloy steel tubing on which the external or internal surface, or both, has been modified by a cold forming process to produce an integral enhanced surface for improved heat transfer. The tubes are used in surface condensers, evaporators, heat exchangers and similar heat transfer apparatus in unfinned end diameters up to and including 1 in. (25.4 mm). Boiler tubes are excluded.1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.1.3 The following precautionary statement pertains to the test method portion only, Section 12, of this specification:This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Seamless and Welded Ferritic, Austenitic and Duplex Alloy Steel Condenser and Heat Exchanger Tubes With Integral Fins

AWS D8.9M-2002 汽车薄型钢材的耐点焊特性试验惯例的推荐性实施规程D8.9M-2002

Safety and health issues and concerns are beyond the scope of this standard, and therefore are not fully addressed herein. Safety and health information is available from other sources, including but not limited to, ANSI Z49.1, Safety in Welding, Cutting, and Allied Processes, and applicable federal and state regulations.

Recommended Practices for Test Methods for Evaluating the Resistance Spot Welding Behavior of Automotive Sheet Steel Materials

AWS G2.1M/G2.1-2002 锻造镍合金指南 重新印刷 整合修正:2003年10月

This standard establishes the qualification requirements for Hot Gas, Hot Gas Extrusion, and Heated Tool Butt Thermoplastic plastics welding inspection personnel; the requirements for structuring the examination to qualify these personnel; and defines the body of knowledge for plastics welding inspectors.

Guide for the Joining of Wrought Nickel-Based Alloys Reprinted, Incorporates Errata: October 2003

ANSI/AISI/COFS/TRUSS-2002 冷成型钢结构.桁架设计

Provides technical information and specifications on cold-formed steel truss construction. The American Iron and Steel Institute's (AISI's) Committee on Framing Standards (COFS) has developed this Standard For Cold-Formed Steel Framing-Truss Design [Truss Standard].The design of cold-formed steel trusses for load carrying purposes in buildings shall be in accordance with the Specification for the Design of Cold-Formed Steel Structural Members [Specification] except as modified by the provisions of this Standard. The design of such trusses shall also be in accordance with the Standard for Cold-Formed Steel Framing - General Provisions [General Provisions] where specifically adopted by a section of this standard. This Standard shall also apply to manufacturing, quality criteria, installation and testing as they relate to the design, of cold-formed steel trusses. This standard does not intend to preclude the use of other materials, assemblies, structures or designs not meeting the criteria herein, when they demonstrate equivalent performance for the intended use to those specified in this standard.

Cold-Formed Steel Framing - Truss Design

AECMA PREN 2049-2001 航空航天系列.铝合金冷拉挤压的槽钢.P2版 2000年8月

This "Aerospace Series" Prestandard has been drawn up under the responsibility of AECMA (The European Association of Aerospace Industries). it is published on green paper for the needs of AECMA-Members. It has been technically approved by the experts of the concerned Technical Committee following comment by the Member countries.

Aerospace Series Extruded Channel Section, in Aluminium Alloys Dimensions Edition P 2

CNS 14571-2001 钢及钢制品之检验文件

本标准适用于钢及钢制品之各种交货检验文件。若经买卖双方同意，本标准亦得适用于其它材料制品。

Steel and steel products─Inspection documents