77.150.99 其他有色金属产品 标准查询与下载

YS/T 1373-2020 钼钛锆（TZM）合金坯

Molybdenum titanium zirconium (TZM) alloy billet

YS/T 85-2020 光谱分析用铑基体

Rhodium matrix for spectroscopic analysis

YS/T 82-2020 光谱分析用铂基体

Platinum matrix for spectroscopic analysis

YS/T 39-2020 氙灯钨阳极

Xenon lamp tungsten anode

YS/T 84-2020 光谱分析用铱基体

Iridium matrix for spectroscopic analysis

YS/T 1354-2020 硒粉

Selenium powder

YS/T 1391-2020 新戊酸钯

Palladium pivalate

YS/T 1385-2020 二碘（对伞花烃）钌（II）

Diiodo(p-cymene)ruthenium(II)

YS/T 83-2020 光谱分析用钯基体

Palladium matrix for spectroscopic analysis

YS/T 1374-2020 超细钼粉

Ultrafine molybdenum powder

YS/T 81-2020 高纯海绵铂

High purity platinum sponge

YS/T 1372-2020 钼钛锆（TZM）合金粉

Molybdenum titanium zirconium (TZM) alloy powder

YS/T 1358-2020 磁记录用铁钴钽合金溅射靶材

Iron-cobalt-tantalum alloy sputtering target for magnetic recording

T/ZZB 1893-2020 厨房电器用钕铁硼磁钢

本文件规定了厨房电器用钕铁硼磁钢的术语和定义、分类与牌号、基本要求、技术要求、试验方法、检验规则、标志、包装、运输、贮存和质量证明书、质量承诺。 本文件适用于粉末冶金工艺生产厨房电器用的烧结钕铁硼磁体。

NdFeB magnet of kitchen utensils

T/ZZB 1820-2020 阴极保护镁合金牺牲阳极

本文件规定了阴极保护镁合金牺牲阳极（以下简称镁阳极）的产品分类、基本要求、技术要求、试验方法、检验规则、标志、包装、运输与贮存、质量承诺等内容。 本文件适用于在土壤、淡水及海水等介质中工作的金属（主要是钢质）设施采用阴极保护用的铸造、挤压方法生产的镁阳极。

Magnesium alloy sacrificial anode for cathodic protection

T/SDQE 017-2020 泰山品质 碳纤维连续抽油杆

本文件规定了碳纤维复合材料连续抽油杆的型式、规格、技术要求、试验方法、检验规则、标志、 包装、运输和贮存等。 本文件适用于以碳纤维为主要增强材料、树脂为基体材料制备的碳纤维复合材料连续抽油杆

Taishan quality carbon fiber continuous sucker rod

ASTM B653/B653M-11(2020) 无缝和焊接锆和锆合金焊接接头的标准规范

1.1 This specification covers fittings, factory made from three grades of zirconium and zirconium alloys. The term welding fittings applies to butt-welding parts such as 45 and 90° elbows, 180° returns, caps, tees, reducers, lap-joint stub ends, and other types. 1.2 The values stated in either inch-pound units or SI units are to be regarded separately as the standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Welding Fittings

T/ZZB 1718-2020 半导体封装用键合金丝

本标准规定了半导体封装用键合金丝（以下简称金丝）的基本要求、产品分类和标记、技术要求、试验方法、检测规则、标志、包装、运输和贮存、质量证明书、质量承诺。 本标准适用于半导体分立器件、集成电路、LED封装用键合金丝。

Gold bonding wire for semiconductor package

T/CNIA 0051-2020 氧化铝负载钯催化剂

本标准规定了氧化铝负载钯催化剂产品的技术要求、试验方法、检验规则及标志、包装、运输、贮存、质量证明书和订货单（或合同）内容。 本标准适用于合成环己醇、环己酮、己内酰胺、己二酸等化工行业用的氧化铝负载钯催化剂。

Alumina Supported Palladium Catalyst

T/CNIA 0057-2020 碳酸钙负载钯催化剂

本标准规定了碳酸钙负载钯催化剂的术语和定义、技术要求、试验方法、检验规则、标志、包装、运输、贮存和质量证明书及订货单（或合同）等内容。 本标准适用于精细化工、石油化工、医药化工、香料化工、染料颜料工业、农药等领域使用的碳酸钙负载钯催化剂。

Calcium Carbonate Supported Palladium Catalyst