79.020 木材加工技术 标准查询与下载

SB/T 10759-2012 红木制品等级

本标准规定了红木制品的等级、等级划分、等级评定的方法以及包装、运输、贮存、标识的要求。本标准适用于红木制品。

Specification for classification of Hongmu products

LY/T 1284-2012 木材防腐剂对软腐菌毒性实验室试验方法

本标准规定了在实验室条件下,通过测定经防腐剂处理的木材受软腐菌侵染后造成的木材质量损失,确定该防腐剂毒性的试验方法。 本标准适用于测定木材防腐剂对软腐菌的毒性极限。

Method of laboratory test for toxicity of wood preservatives to soft-rot fungus

LY/T1284-2012 木材防腐剂对软腐菌毒性实验室试验方法

Method of laboratory test for toxicity of wood preservatives to soft-rot fungus

DIN 68101:2012 木材加工和处理的基本偏差和公差范围

Fundamental deviations and tolerance zones for wood working and wood processing

SNI ISO 9086.1:2012 木材 物理和机械测试方法 词汇 第1部分：一般概念和宏观结构

Wood - Methods of physical and mechanical testing - Vocabulary - Part 1: General concepts and macrostructure

DB34/T 1472-2011 竹针

本标准适用于利用毛竹生产、加工的竹针产品。

bamboo needle

LY/T 1283-2011 木材防腐剂对腐朽菌毒性试验室试验方法

本标准规定了在最适宜的实验室条件下，通过测定经防腐剂处理的木材受腐朽菌侵染后造成的木材质量损失，确定所试验的防腐剂能有效防止所选定的腐朽菌对所处理的木材腐朽的最小用量（即毒性极限值）的方法。用这方法测得的这种防腐剂的毒性极限值可视为该防腐剂在地面以上（包括与地接触）野外试验时所应达到的最小载药量。

Method of laboratory test for toxicity of wood preservatives to decay fungi

DB34/T 1380-2011 林木采伐、加工剩余物和废弃木材回收利用规范

本标准规定了林木采伐、加工剩余物和废弃木材回收利用的术语和定义、基本原则、分类、回收、贮存和运输、回收利用、回收利用的安全、环保要求、回收物产品的标识及销售要求。本标准适用于废旧物资回收，木材加工和利用的管理与生产企业。

Specifications for the recycling and utilization of forest felling, processing residues and waste wood

ISO/CD 13391-1:2011 木材和木制品 碳平衡 第 1 部分：价值链计算框架

Wood and wood-based products — Carbon balance — Part 1: Framework for value chain calculation

VDI 3413-2011 木工砂带打磨

The aim of this guideline is to describe the use of belt sanders for sanding wood and wood-based materials. Numerous types of wood and wood-based materials of virtually any shape and size can be processed with the aid of belt sanders.As well as providing an overview of the tooling, machine systems and technology involved, the guideline provides examples of belt sanding applications. Aimed at production engineers, woodworking technicians and machine operators, it is designed to assist them in process planning and organisation and the configuration of belt sanding processes.

Belt sanding in wood working

ISO/CD 13391-2:2011 木材和木制品 碳平衡 第 2 部分：森林经营单位

Wood and wood-based products — Carbon balance — Part 2: Forest management unit

ISO/CD 13391-3:2011 木材和木基产品 碳平衡 第 3 部分：计算位移效应 包括通过替代

Wood and wood-based products — Carbon balance — Part 3: Calculation of the displacementeffects including through substitution

KS F 2227-2010(2015) 木材蠕变试验方法

Method of creep test for wood

KS F 2227-2010 木材蠕变测试方法

이 표준은 목재의 크리프 시험 방법(세로 압축 크리프 시험ㆍ가로 압축 크리프 시험ㆍ부분 압

Method of creep test for wood

DS/EN 12490:2010 木材和木制品的耐久性 防腐处理过的实木 杂酚油在处理过的木材中渗透和保留的测定

This European Standard specifies the reference methods for determining the penetration and retention of creosote in timber freshly treated with creosote, principally in order to ascertain whether the treated timber conforms to specifications written in terms of EN 351-1. It also provides guidance on the acquisition of test samples and their handling between sampling and analysis.NOTE In the day-to-day practice at the plant, other methods (e.g. weighing the charge before and after treatment) can be used for determining the retention, provided that a significant relationship can be established with this method.

Durability of wood and wood-based products - Preservative-treated solid wood - Determination of the penetration and retention of creosote in treated wood

DIN 68100:2010 木材处理和加工的公差系统. 概念, 公差系统, 收缩尺寸和膨胀尺寸

Tolerance system for wood working and wood processing - Concepts, series of tolerances, shrinkage and swelling

CSA O302.1-09/O302.2-2009(C2014) 测量圆木/测量木片、残留物和副产品

O302.1-09 Mesurage des bois ronds Domaine d'application 1.1 Cette norme prescrit les exigences minimales visant le mesurage des bois ronds en unités SI (métriques) et aborde les processus de quantification et d'assurance de la qualité. Note : Les exigences visant le mesurage et l'estimation des quantités de copeaux, de résidus et de sous-produits sont prescrites dans la CSA O302.2. 1.2 Cette norme s'adresse aux personnes et aux organismes chargés du mesurage et du mesurage de vérification des produits forestiers bruts au Canada. 1.3 Dans les normes CSA, le terme «doit» indique une exigence, c'est-à-dire une prescription que l'utilisateur doit respecter pour assurer la conformité à la norme ; «devrait» indique une recommandation ou ce qu'il est conseillé mais non obligatoire de faire ; et «peut», une possibilité ou un conseil. Les notes qui accompagnent les articles ne comprennent pas de prescriptions ni de recommandations. Elles servent à séparer du texte les explications ou les renseignements qui ne font pas proprement partie de la norme. Les notes au bas des figures et des tableaux font partie de ceux-ci et peuvent être rédigées comme des prescriptions. Les annexes sont qualifiées de normatives (obligatoires) ou d'informatives (facultatives) pour en préciser l'application. ---------------------------------------------------------------- O302.2-09 Mesurage des copeaux, résidus et sous-produits du bois Domaine d'application 1.1 Cette norme énonce les exigences minimales relatives au mesurage, en unités SI (métriques), des copeaux ainsi que des résidus et des sous-produits du bois dans les véhicules, les conteneurs, les navires et en piles. 1.2 Cette norme s'adresse aux acheteurs, aux producteurs, aux vendeurs, aux transporteurs et toute autre personne qu'intéressent la fabrication, le transport, l'entreposage et l'utilisation des copeaux ainsi que des résidus et sous-produits du bois. 1.3 Dans les normes CSA, le terme «doit» indique une exigence, c'est-à-dire une prescription que l'utilisateur doit respecter pour assurer la conformité à la norme ; «devrait» indique une recommandation ou ce qu'il est conseillé mais non obligatoire de faire ; et «peut», une possibilité ou un conseil. Les notes qui accompagnent les articles ne comprennent pas de prescriptions ni de recommandations. Elles servent à séparer du texte les explications ou les renseignements qui ne font pas proprement partie de la norme. Les notes au bas des figures et des tableaux font partie de ceux-ci et peuvent être rédigées comme des prescriptions. Les annexes sont qualifiées de normatives (obligatoires) ou d'informatives (facultatives) pour en préciser l'application.

Measuring round wood/Measuring wood chips, residues and by-products

DB37/T 1315-2009 木塑复合材料通用技术条件

本标准规定了木塑复合材料的定义、技术要求、检验方法、检验规则、标志、包装、运输和贮存等。 本标准适用于各种工艺和配比制成的木塑材料。本标准根据产品使用要求和目前国内外木塑复合材料生产企业的产品质量情况制定的。

General technical specifications for wood-plastic composite materials

CSA O302.1-09/O302.2-2009(R2014) 原木除垢/木片、树木残留物和副产品的测量

Preface This is the fourth edition of CSA O302.1, Scaling roundwood, which supersedes the previous editions, published in 2000, 1986, and 1977, and the third edition of CSA O302.2, Measurement of wood chips, tree residues, and by-products, which supersedes the previous editions, published in 2000 and 1986 under the title Measurement of Woodchips, Tree Residues, and Byproducts. --------------------------------------------------------- O302.1-09 Scaling roundwood Scope 1.1 This Standard specifies minimum requirements for scaling roundwood in SI (metric) units and covers processes for quality and quantification assurance. Note: Requirements on measuring and estimating quantities of wood chips, tree residues, and by-products are specified in CSA O302.2. 1.2 This Standard is intended for individuals or agencies charged with scaling and check scaling of primary forest products in Canada. 1.3 In CSA Standards, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; "should" is used to express a recommendation or that which is advised but not required; "may" is used to express an option or that which is permissible within the limits of the standard; and "can" is used to express possibility or capability. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application. --------------------------------------------------------- O302.2-09 Measurement of wood chips, tree residues, and by-products Scope 1.1 This Standard specifies minimum requirements for measuring, in SI (metric) units, wood chips, tree residues, and by-products in vehicles, containers, vessels, and piles. 1.2 This Standard is intended for purchasers, producers, sellers, transportation agencies, and others concerned with the manufacture, transportation, storage, and use of wood chips, tree residues, and by-products. 1.3 In CSA Standards, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; "should" is used to express a recommendation or that which is advised but not required; "may" is used to express an option or that which is permissible within the limits of the standard; and "can" is used to express possibility or capability. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application.

Scaling roundwood/Measurement of wood chips, tree residues, and by-products

LY/T 1451-2008 纤维板生产综合能耗

本标准规定了纤维板生产单位产量基本能耗等级指标、计算及测试方法。 本标准适用于以木本植物为原料的各类型纤维板生产综合能耗计算和能耗等级考核。以其他原料生产的纤维板综合能耗亦应参照执行。

Overall energy consumption for fibreboard production