81.040 玻璃 标准查询与下载

AIA/NAS NAS 906-1982 (Rev. 1)外径2 1/4 及1 1/2光学玻璃冷加工用工具实心线性目标

HEAD MARKING SHALL BE RAISED OR DEPRESSED (.O10 MAX.) AND ARRANGED AS FOLLOWS: MARK WITH MANUFACTURER'S SYMBOL OR TRADEMARK, LENGTH DASH NUMBER AND RECESS NUMBERS ENCIRCLED. RECESS NUMBER TO BE APPROXIMATELY 25% LARGER THAN OTHER NUMBERS. MARK WlTH BASIC PART NUMBER ("NAS" OPTIONAL) EXCEPT MARK .1640-32 WITH "8"

Linear Targets, Solid, Optical Tooling 2 1/4 and 1 1/2 Outside Diameters (Rev. 1)

AIA/NAS NAS 904-1982 (Rev. 1)杯状支架光学玻璃冷加工用工具基座

HEAD MARKING SHALL BE RAISED OR DEPRESSED (.O10 MAX.) AND ARRANGED AS FOLLOWS: MARK WITH MANUFACTURER'S SYMBOL OR TRADEMARK, LENGTH DASH NUMBER AND RECESS NUMBERS ENCIRCLED. RECESS NUMBER TO BE APPROXIMATELY 25% LARGER THAN OTHER NUMBERS. MARK WlTH BASIC PART NUMBER ("NAS" OPTIONAL) EXCEPT MARK .1640-32 WITH "8"

Base - Optical Tooling Spherical Cup Mount (Rev. 1)

AIA/NAS NAS 903-1982 (Rev. 2)外径2 1/4 及1 1/2光学玻璃冷加工用工具球形支架适配器

This standard provldes for the packaging of multiple fasteners in a transparent, plastic bag

Spherical Mount Adapters - Optical Tooling 2 1/4 and 1 1/2 Diameter Targets (Rev. 2)

AIA/NAS NAS 902-1982 (Rev. 2)外径2 1/4 及1 1/2光学玻璃冷加工用工具透明线性目标

NAS1212MlOAJ22 = ASSEMBLY OF 1 INCH NATURAL COTTON STRAP, 22 INCHES LONG, WITH ONE "D' RING END FITTING AND ONE PLAIN END.

Linear Targets, See-Thru, Optical Tooling 2 1/4 and 1 1/2 Outside Diameters (Rev. 2)

AIA/NAS NAS 901-1982 (Rev. 2)光学玻璃冷加工用工具望远镜及瞄准仪

MOLY DISULFIDE DRY FILM LUBRICANT I N ACCORDANCE WITH MIL-L-46010 I S DESIGNATED BY CODE LETTER "M".

Telescopes and Collimators for Optical Tooling (Rev. 2)

AIA/NAS NAS 900-1982 (Rev. 2)内部钻孔2.2500球状光学玻璃冷加工用工具支架

MOLY DISULFIDE DRY FILM LUBRICANT I N ACCORDANCE WITH MIL-L-46010 I S DESIGNATED BY CODE LETTER "M".

Mount - Optical Tooling Spherical 2.2500 Inside Bore (Rev. 2)

AIA/NAS NAS 889-1982 光学玻璃冷加工用工具光学直角尺

THESE BUSHINGS ARE INTENDED FOR REAMING AFTER INSTALLATION.

Optical Squares for Optical Tooling

AIA/NAS NAS 887-1982 光学玻璃冷加工用工具经纬仪

SEL, COLD-DRAW. B1 112 OR 1212. IN ACCORDANCE WITH THE PROCUREMENT SPECIFICATION.

Theodolites for Optical Tooling

AIA/NAS NAS 886-1982 光学玻璃冷加工用工具工具经纬仪及坐标经纬仪

INDICATED T DIMENSION FOR A GIVEN COMBINATION APPLIES ONLY TO THt ASSEMRLY WHICH HAS THE THREAD LENGTii SHORTER THAN THE STANDARD THREAD LENGTH GIVEN IN TABLE ON SHEET 1

Jig Transit and Jig Transit Squares for Optical Tooling

AIA/NAS NAS 885-1982 光学玻璃冷加工用工具测量

AISI 1050 (UNS G10500) OR AISI 1060 (UNS GlDSOO) STEEL

Scales for Optical Tooling

AIA/NAS NAS 884-1982 激光头不结盟光学玻璃冷加工用工具界面

NAS312THRuNAS320, Ilcable Assembly Swaged Type Type I and Type II Terminals", was adopted on 14-AUG-95 for use by the Department of Defense (DoD). Proposed changes by DoD activities must be submitted to the DoD Adopting Activity: Commander, Naval Air Warfare Center, Aircraft Division (API Group), Systems Requirements Department (SR31, Highway 547, Lakehurst, NJ 08733-5100. DoD activities may obtain copies of this standard from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094. The private sector and other Government agencies may purchase copies from the Aerospace Industries Associated of America Inc., 1250 Eye Street, N.W., Washington, DC 20005-3922.

Interface-Optical Tooling Non-Alignment Laser Head

AIA/NAS NAS 888-1982 光学玻璃冷加工用工具视力标准

HEAD MARKING SHALL BE RAISED OR DEPRESSED (, O10 MAX) AND ARRANGED AS FOLLOWS: MARK WITH BASIC IUMBER (NAS OPTIONAL) EXCEPT MARK .1380-32 SIZE WITH '6' AND .1640-32 SIZE WITH '8'. 4FR. SYMBOL, LENGTH DASH NUMBER AND RECESS NUMBER ENCIRCLED, RECESS NUMBER TO BE APPROXIMATELY 5% LARGER THAN OTHER NUMBERS,

Sight Levels for Optical Tooling

AIA/NAS NAS 883-1982 透镜平行面及表面光学玻璃冷加工用工具反射镜目标

NAS312THRuNAS320, Ilcable Assembly Swaged Type Type I and Type II Terminals", was adopted on 14-AUG-95 for use by the Department of Defense (DoD). Proposed changes by DoD activities must be submitted to the DoD Adopting Activity: Commander, Naval Air Warfare Center, Aircraft Division (API Group), Systems Requirements Department (SR31, Highway 547, Lakehurst, NJ 08733-5100. DoD activities may obtain copies of this standard from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094. The private sector and other Government agencies may purchase copies from the Aerospace Industries Associated of America Inc., 1250 Eye Street, N.W., Washington, DC 20005-3922.

Mirror Targets - Optical Tooling Front Surface and Plano- Parallel

AIA/NAS NAS 882-1982 光学玻璃冷加工用工具刀杆系统条

NAS312THRuNAS320, Ilcable Assembly Swaged Type Type I and Type II Terminals", was adopted on 14-AUG-95 for use by the Department of Defense (DoD). Proposed changes by DoD activities must be submitted to the DoD Adopting Activity: Commander, Naval Air Warfare Center, Aircraft Division (API Group), Systems Requirements Department (SR31, Highway 547, Lakehurst, NJ 08733-5100. DoD activities may obtain copies of this standard from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094. The private sector and other Government agencies may purchase copies from the Aerospace Industries Associated of America Inc., 1250 Eye Street, N.W., Washington, DC 20005-3922.

Bar - Optical Tooling Tooling Bar System

AIA/NAS NAS 881-1982 光学玻璃冷加工用工具刀杆系统索引条

NAS312THRuNAS320, Ilcable Assembly Swaged Type Type I and Type II Terminals", was adopted on 14-AUG-95 for use by the Department of Defense (DoD). Proposed changes by DoD activities must be submitted to the DoD Adopting Activity: Commander, Naval Air Warfare Center, Aircraft Division (API Group), Systems Requirements Department (SR31, Highway 547, Lakehurst, NJ 08733-5100. DoD activities may obtain copies of this standard from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094. The private sector and other Government agencies may purchase copies from the Aerospace Industries Associated of America Inc., 1250 Eye Street, N.W., Washington, DC 20005-3922.

Index Bar - Optical Tooling Tooling Bar System

AIA/NAS NAS 880-1982 电子标准光学玻璃冷加工用工具界面

NAS312THRuNAS320, Ilcable Assembly Swaged Type Type I and Type II Terminals", was adopted on 14-AUG-95 for use by the Department of Defense (DoD). Proposed changes by DoD activities must be submitted to the DoD Adopting Activity: Commander, Naval Air Warfare Center, Aircraft Division (API Group), Systems Requirements Department (SR31, Highway 547, Lakehurst, NJ 08733-5100. DoD activities may obtain copies of this standard from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094. The private sector and other Government agencies may purchase copies from the Aerospace Industries Associated of America Inc., 1250 Eye Street, N.W., Washington, DC 20005-3922.

Interface - Optical Tooling Electronic Level

AIA/NAS NAS 879-1982 螺纹3 1/2-8到5/8-11 光学玻璃冷加工用工具适配器

MOLY DISULFIDE DRY FILM LUBRICANT I N ACCORDANCE WITH MIL-L-46010.

Adapter - Optical Tooling 3 1/2-8 to 5/8-11 Thread

AIA/NAS NAS 878-1982 螺纹3 1/2-8 光学玻璃冷加工用工具支架

MOLY DISULFIDE DRY FILM LUBRICANT I N ACCORDANCE WITH MIL-L-46010.

Mount - Optical Tooling 3 1/2-8 Thread

ARMY MIL-HDBK-722-1969 玻璃

This commercial item description covers brown kraft paper used for general wrapping applications.

GLASS