83.200 橡胶和塑料工业设备 标准查询与下载

NF E63-609-4/IN1:2008 橡胶和塑料机械.粉碎机.第4部分:凝聚剂的安全要求

Plastics and rubber machines - Size reduction machines - Part 4 : safety requirements for agglomerators.

NF E63-609-2/IN2:2008 塑料和橡胶机械.粉碎机.第2部分:线料切粒机的安全要求

Plastics and rubber machines - Size reduction machines - Part 2 : safety requirements for strand pelletisers.

NF E63-609-2:2008 塑料和橡胶机械.粉碎机.第2部分:线料切粒机的安全要求

Plastics and rubber machines - Size reduction machines - Part 2 : safety requirements for strand pelletisers.

NF E63-611/IN1:2008 橡胶和塑料机械.砑光机.安全要求

Plastics and rubber machines - Calenders - Safety requirements.

NF E63-609-3:2008 塑料和橡胶机械.粉碎机.第3部分:粉碎机的安全要求

Plastics and rubber machines - Size reduction machines - Part 3 : safety requirements for shredders.

NF E63-611:2008 塑料和橡胶机械.砑光机.安全要求

Plastics and rubber machines - Calenders - Safety requirements.

BS EN 12409:2008 塑料和橡胶机械.加热成形机.安全要求

This European Standard deals with all significant hazards, hazardous situations and events relevant to thermoforming machines for continuous sheet and single sheets of thermoplastics materials, when they are used as intended and under conditions of misuse which are foreseeable by the manufacturer (see Clause 4). A thermoforming machine may consist of a forming unit or a forming unit linked to one or more additional units. This standard covers the following units: ? continuous sheet unwind unit; ? single sheet feed unit; ? material intake; ? conveying equipment; ? heating unit; ? preheating unit; ? edge heating unit; ? component feeding/inserting unit; ? forming station; ? finishing station; ? stacking station; ? discharge station; ? residual sheet winding unit; ? sheet cutting unit. This European standard does not apply to units mounted upstream or downstream of the thermoforming machine: ? which have a separate control system; and/or ? are located separately. NOTE 1 This European Standard specifies requirements for machines supplied as a single forming unit or a number of units designed to operate as a single machine. Additional units that may be introduced at a later stage should be considered separately applying relevant standards and taking into account any hazards arising through their interaction with the thermoforming machine. This European Standard does not apply to units which are integrated into form, fill and seal machines. These are covered in EN 415-3:1999. This European standard does not apply to units which incorporate heating systems which are fuelled by gas. NOTE 2 Thermoforming machines generally do not create explosive atmospheres. In principle they therefore correspond with line F of Table 2 of the ATEX Guideline and consequently do not fall within the scope of Directive 94/9/EC. This European Standard is not applicable to thermoforming machines which are manufactured before the date of its publication as EN.

Plastics and rubber machines - Thermoforming machines - Safety requirements

BS EN 12409:2008+A1:2011 塑料和橡胶机械.加热成形机.安全要求

Plastics and rubber machines. Thermoforming machines. Safety requirements

DS/EN 12012-1+A1:2008 塑料和橡胶机械 粉碎机 第1部分：刀片造粒机的安全要求

This document specifies the essential safety requirements applicable to the design and construction of blade granulators used to reduce objects and materials made from plastics and rubber into granules.The machine begins with the outer edge of the feed opening, or feeding device if it is an integral part of the machine, and ends with the discharge area.Only the significant hazards listed in clause 4 and dealt with in clause 5 are subject to this document.This document does not deal with hazards caused by processing harmful materials.This document is not applicable to machines which are manufactured before the date of its publication as an EN.

Plastics and rubber machines - Size reduction machines - Part 1: Safety requirements for blade granulators

DS/EN 12301+A1:2008 塑料和橡胶机械 压延机 安全要求

This European standard specifies safety requirements relating to the design and construction of multi-roll calenders intended for the processing of rubber or plastics.This standard concerns the calender alone including all components fixed to its frame.Annex A shows examples of various types of calenders and annex B shows examples of calendaring processes.The following machines are excluded:- two-roll calenders forming an integral unit with an extruder (roller head);- two or three-roll polishing , laminating or embossing units (which are not calenders) installed downstream of extruders in film processing lines.This standard deals with the significant hazard

Plastics and rubber machines - Calenders - Safety requirements

DS/EN 12012-3+A1:2008 塑料和橡胶机械 粉碎机 第3部分：粉碎机的安全要求

This standard specifies the essential safety requirements applicable to the design and construction of shredders used for plastic and rubber.The machine begins with the outer edge of the feed hopper and ends with the discharge area.This standard does not deal with equipment for feeding material or discharging shredded material.This standard does not deal with safety measures to reduce the risk from ignition of flammable residues in material to be shreddedThis standard does not deal with requirements for local exhaust ventilation systems.Only the significant hazards listed in clause 4 and dealt with in clause 5 are subject to this standard.NOTE Directive 94/

Plastics and rubber machines - Size reduction machines - Part 3: Safety requirements for shredders

DS/EN 12012-4+A1:2008 塑料和橡胶机械 粉碎机 第4部分：团聚机的安全要求

This European Standard specifies the essential safety requirements applicable to the design and construction of agglomerators used to densify plastic scrap, reducing its size and/or volume.The limits of the agglomerator are as follows:- the outer edge of the feed opening, or outer edge of the fixed feed device (e.g. hopper) or the interface between the feed system (e.g. conveyor) and the agglomerator chamber and- the outer edge of the discharge opening of the agglomerator chamber or the interface between the agglomerator chamber and the discharge system.Only the significant hazards listed in Clause 4 and dealt with in Clause 5 are subject to this European S

Plastics and rubber machines - Size reduction machines - Part 4: Safety requirements for agglomerators

NF E63-612-1:2008 橡胶和塑料机械.反应铸模机械.第1部分:计量和混合元件的安全要求

Plastics and rubber machines - Reaction moulding machines - Part 1 : safety requirements for metering and mixing units.

NF E63-612-1/IN1:2008 塑料和橡胶机械.反应模塑机.第1部分:测量和混合设备的安全要求

Plastics and rubber machines - Reaction moulding machines - Part 1 : safety requirements for metering and mixing units.

NF E63-610:2008 塑料和橡胶机器.内部混合器.安全要求

Plastics and rubber machines - Internal mixers - Safety requirements.

NF E63-610/IN1:2008 塑料和橡胶机械.内部混合器.安全要求

Plastics and rubber machines - Internal mixers - Safety requirements.

DS/EN 1612-1+A1:2008 塑料和橡胶机械 反应成型机 第1部分：计量和混合装置的安全要求

This standard specifies the health and safety requirements for the design of metering and mixing units for reaction moulding machines. The significant and specific hazards are listed in clause 4 and are dealt with in this standard.This standard does not cover completely the hazards arising from the use of highly flammable additives, for example, pentane used as a blowing agent (see 4.7), because these hazards depend to a large extent on the additives and processes used.This standard does not cover the hazards arising from the assembly of separate units not supplied at the same time by the same manufacturer.This standard does not cover the hazards arising fr

Plastics and rubber machines - Reaction moulding machines - Part 1: Safety requirements for metering and mixing units

DS/EN 1417+A1:2008 塑料和橡胶机械 双辊轧机 安全要求

This standard covers the essential health and safety requirements for all two roll mills for the processing of rubber and plastics. Significant hazards are listed in clause 4 and are covered by this standard.Figure 1 shows the principal parts of a two roll mill.This standard does not cover requirements for the design of an exhaust system.This standard applies to two roll mills which are manufactured after the date of issue of this standard.

Plastics and rubber machines - Two roll mills - Safety requirements

DS/EN 12013+A1:2008 塑料和橡胶机械 密炼机 安全要求

This standard applies to internal mixers for rubber and plastics as defined in 3.1. The safety requirements and/or measures specified in this standard apply to all internal mixers irrespective of their size and irrespective of the control modes of the hopper front door and discharge door.The safety requirements for the design of exhaust systems and ancillary equipment are not covered by this standard.The safety requirements for the interaction between internal mixers and ancillary equipment are specified.This standard covers the significant hazards listed in Clause 4.This standard is not applicable to internal mixers which are manufactured before the date o

Plastics and rubber machines - Internal mixers - Safety requirements

NF E63-606/IN1:2008 塑料和橡胶机械.冲压机.安全要求

Plastics and rubber machines - Presses - Safety requirements.