85.100 造纸工业设备 标准查询与下载

BS EN 1034-5:2005+A1:2009 机械安全性.造纸机和精整机的设计和结构安全性要求.切纸机

This European Standard applies to sheeters, including unwinding units, sheet stacker, drive and control units intended for use in paper making and shall be used together with !EN 1034-1:2000+A1:2010". Paper dust and edge strip suction devices are not covered by this standard. It deals with all significant hazards, hazardous situations and hazard events relevant to sheeters, when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). This standard does not apply to: ? sheeters for corrugated board (see EN 1010-5); ? sheeters for foil (see EN 1010-1); ? sheeters with sheet feeders (see EN 1010-1); ? guillotines (see EN 1010-3:2002). This document is not applicable to sheeters that have been manufactured before the date of publication of this document by CEN.

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Sheeters

BS EN 1034-5:2005 机械的安全性.造纸机和精整机的设计和结构安全性要求.切纸机

This European Standard applies to sheeters, including unwinding units, sheet stacker, drive and control units intended for use in paper making and shall be used together with EN 1034-1:2000. Paper dust and edge strip suction devices are not covered by this standard. It deals with all significant hazards, hazardous situations and hazard events relevant to sheeters, when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). This standard does not apply to: ? sheeters for corrugated board (see EN 1010-5); ? sheeters for foil (see EN 1010-1); ? sheeters with sheet feeders (see EN 1010-1); ? guillotines (see EN 1010-3:2002). This document is not applicable to sheeters that have been manufactured before the date of publication of this document by CEN.

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 5: Sheeters

BS EN 1034-2:2005 机械安全.造纸机和修整机的设计和建造的安全要求.第2部分:鼓式剥皮机

This European Standard applies to barking drums consisting of drum, drive, power transmission elements, supporting wheels and control systems intended for use in debarking plants for paper making and shall be used together with EN 1034-1:2000. It deals with all significant hazards, hazardous situations and hazard events relevant to barking drums, when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). This standard does not apply to sawing equipment or log and bark conveying systems used in debarking plants. This European Standard is not applicable to barking drums that have been manufactured before the date of publication of this European Standard by CEN.

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 2: Barking drums

BS EN 1034-13:2005 机械安全.造纸和整饰机械的设计和建造用安全要求.第13部分:货物和装置除线用机器

This European Standard applies to machines for de-wiring bales and units and shall be used together with EN 1034-1:2000. It deals with all significant hazards, hazardous situations and hazard events relevant to machines for de-wiring bales and units, when used as intended and under conditions reasonably foreseeable by the manufacturer as incorrect application (see clause 4). This European Standard is not applicable to hand-held devices. This European Standard is not applicable to machines for de-wiring bales and units which are manufactured before the date of publication of this document by CEN.

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 13: Machines for de-wiring bales and units

BS EN 1034-13:2005+A1:2009 机械安全性.造纸和整饰机械的设计和建造用安全性要求.货物和装置除线用机器

This European Standard applies to machines for de-wiring bales and units and shall be used together with !EN 1034-1:2000+A1:2010". It deals with all significant hazards, hazardous situations and hazard events relevant to machines for de-wiring bales and units, when used as intended and under conditions reasonably foreseeable by the manufacturer as incorrect application (see clause 4). This European Standard is not applicable to hand-held devices. This European Standard is not applicable to machines for de-wiring bales and units which are manufactured before the date of publication of this document by CEN.

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Machines for de-wiring bales and units

BS EN 1034-14:2005 机械安全.造纸机械和精整机设计和结构的安全要求.卷纸切纸机

This European Standard applies to reel splitters intended for use in paper making and shall be used together with EN 1034-1:2000. It deals with all significant hazards, hazardous situations and hazardous events relevant to reel splitters when used as intended and under the conditions reasonably foreseen by the manufacturer as incorrect application (see clause 4). This European Standard applies only to reel splitters with a movable knife and of the following designs: - machines with a vertically moving knife pressed downwards from the top onto the reel, generally right to the core so that the layers of wound paper are separated one after the other and fall off; - machines with a driven and movable circular knife that cuts the wound layers of the horizontal reel successively, beginning from the top down to the core, with the cut layers of wound paper falling off one after the other. This European Standard also applies to the integrated conveyor belts and the integrated pivoting platform. This European Standard also covers the guard rails at the interface of the reel splitter and a pulper that is charged with an integrated conveyor belt of the reel splitter. NOTE Pulpers are dealt with in EN 1034-4. This European Standard is not applicable to reel splitters which are manufactured before the date of publication of this EN.

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Reel splitter

BS EN 1034-14:2005+A1:2009 机械安全性.造纸和研磨机设计和建造的安全性要求.卷纸切纸机

This European Standard applies to reel splitters intended for use in paper making and shall be used together with !EN 1034-1:2000+A1:2010". It deals with all significant hazards, hazardous situations and hazardous events relevant to reel splitters when used as intended and under the conditions reasonably foreseen by the manufacturer as incorrect application (see clause 4). This European Standard applies only to reel splitters with a movable knife and of the following designs: ? machines with a vertically moving knife pressed downwards from the top onto the reel, generally right to the core so that the layers of wound paper are separated one after the other and fall off; ? machines with a driven and movable circular knife that cuts the wound layers of the horizontal reel successively, beginning from the top down to the core, with the cut layers of wound paper falling off one after the other. This European Standard also applies to the integrated conveyor belts and the integrated pivoting platform. This European Standard also covers the guard rails at the interface of the reel splitter and a pulper that is charged with an integrated conveyor belt of the reel splitter. NOTE Pulpers are dealt with in EN 1034-4. This European Standard is not applicable to reel splitters which are manufactured before the date of publication of this EN.

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Reel splitter

BS EN 1034-4:2005 机械安全.造纸机械和精整机设计和结构的安全要求.碎浆机和装载工具

This European Standard applies to pulpers and their loading facilities intended for use in paper making and shall be used together with EN 1034-1:2000. It deals with all significant hazards, hazardous situations and hazard events relevant to pulpers and their loading facilities, when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). This European Standard is not applicable to pulpers and their loading facilities that have been manufactured before the date of publication of this standard.

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Pulpers and their loading facilities

BS EN 1034-4:2005+A1:2009 机械安全性.造纸机械和精整机设计和结构的安全性要求.碎浆机和装载工具

This European Standard applies to pulpers and their loading facilities intended for use in paper making and shall be used together with !EN 1034-1-2000+A1-2010". It deals with all significant hazards, hazardous situations and hazard events relevant to pulpers and their loading facilities, when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). This European Standard is not applicable to pulpers and their loading facilities that have been manufactured before the date of publication of this standard.

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Pulpers and their loading facilities

BS EN 1034-22:2005 机械安全.纸张制造和整饰机械设计和建造的安全要求.碎木机

This European Standard applies to wood grinders intended for the production of pulp used in paper making including sharpening devices and shall be used together with EN 1034-1:2000. It deals with all significant hazards, hazardous situations and hazard events relevant to wood grinders when used as intended and under the conditions foreseen by the manufacturer (see clause 4). This standard does not apply to loading facilities. Hazards caused by overpressure are not covered by this standard. Note: For hazards caused by overpressure, see the directive for pressure vessels. This European Standard is not applicable to wood grinders manufactured before the date of publication of this European Standard by CEN.

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 22: Woodgrinders

BS EN 1034-22:2005+A1:2009 机械安全性.造纸机械和精整机的设计和建造安全性要求.磨木机

This European Standard applies to wood grinders intended for the production of pulp used in paper making including sharpening devices and shall be used together with !EN 1034-1:2000+A1:2010". It deals with all significant hazards, hazardous situations and hazard events relevant to wood grinders when used as intended and under the conditions foreseen by the manufacturer (see clause 4). This standard does not apply to loading facilities. Hazards caused by overpressure are not covered by this standard. Note: For hazards caused by overpressure, see the directive for pressure vessels. This European Standard is not applicable to wood grinders manufactured before the date of publication of this European Standard by CEN.

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Wood grinders

BS EN 1034-7:2005 机械安全.纸张制造和整饰机械设计和建造的安全要求.箱

This European Standard applies to chests used in paper making and shall be applied together with EN 1034-1:2000. It deals with all significant hazards, hazardous situations and hazard events relevant to chests when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). This European Standard does not apply to tanks for chemicals, storage tanks for starch and other additives used in paper making or basins or vessels for waste water resulting from the paper making process. This European Standard does not apply to chests manufactured before the publication date of this European Standard.

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 7: Chests

BS EN 1034-7:2005+A1:2009 机械安全性.纸张制造和整饰机械设计和构造的安全性要求.箱

This European Standard applies to chests used in paper making and shall be applied together with !EN 1034-1:2000+A1:2010". It deals with all significant hazards, hazardous situations and hazard events relevant to chests when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). This European Standard does not apply to tanks for chemicals, storage tanks for starch and other additives used in paper making or basins or vessels for waste water resulting from the paper making process. This European Standard does not apply to chests manufactured before the publication date of this European Standard.

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Chests

LST EN 1010-5-2005 机械安全 印刷和纸张加工机械设计和制造的安全要求 第5部分：瓦楞纸板生产机器和平板和瓦楞纸板加工机械

Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 5: Machines for the production of corrugated board and machines for the conversion of flat and corrugated board

NF Q79-003-5*NF EN 1010-5:2005 机械安全.印刷和纸张加工机的设计和结构安全要求.第5部分:瓦楞纸板生产机械和平纸板及瓦楞纸板加工机械

Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 5 : machines for the production of corrugated board and machines for the conversion of flat and corrugated board.

NF Q40-002-7:2005 机械安全.纸张制造和整饰机械设计和建造的安全要求.第7部分:箱

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 7 : chests.

NF Q40-002-22:2005 机械安全.纸张制造和整饰机械设计和建造的安全要求.第22部分:磨木机

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 22 : wood grinders.

DIN EN 1010-5:2005 机械安全性.设计和生产打印机和纸加工机的安全性要求.第5部分:波纹板生产机器以及平板和波纹板转换机器.英文版本EN 1010-5-2005

This standard is valid to corrugated cardboard manufacturing and processing machines as well as ...

Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 5: Machines for the production of corrugated board and machines for the conversion of flat and corrugated board; English version EN

DS/EN 1010-5:2005 机械安全 印刷和纸张加工机械设计和制造的安全要求 第5部分：瓦楞纸板生产机器和平板和瓦楞纸板加工机械

This standard applies to machines for the production of corrugated board and the conversion of flat and corrugated board:. corrugated board production machines;. folder gluer machines;. printer slotters, rotary die cutters and combined machines (inline machines);. hand-fed platen machines for cutting and creasing;. automatic platen machines for cutting and creasing;. tube winding machines.

Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 5: Machines for the production of corrugated board and machines for the conversion of flat and corrugated board

EN 1034-7:2005 机械安全.纸张制造和整饰机械设计和建造的安全要求.第7部分:箱.包含修改件A1-2009

This European Standard applies to chests used in paper making and shall be applied together with EN 1034-1:2000+A1:2010. It deals with all significant hazards, hazardous situations and hazard events relevant to chests when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4).This European Standard does not apply to tanks for chemicals, storage tanks for starch and other additives used in paper making or basins or vessels for waste water resulting from the paper making process.This European Standard does not apply to chests manufactured before the publication date of this European Standard.

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 7: Chests (Incorporates Amendment A1: 2009)