85.100 造纸工业设备 标准查询与下载

QB/T 2556-2008 造纸机械用铸铁烘缸设计规定

本标准规定了造纸机械用铸铁烘缸设计的要求和计算公式。 本标准适用于造纸机、纸板机及浆板机用的外径不大于4600mm,设计压力不大于1.1MPa的烘缸和烘毯缸（以下简称“烘缸”）。

Design standard in cast iron dryers used in paper machinery

QB/T 2980-2008 23升打浆机

本标准规定了实验室适用的23升打浆机（以下简称“打浆机”）的要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于质量为400g~600g绝干浆料，介质为清水，浆和水的最大体积为23升的实验室打浆用打浆机。

23L Labortory beater

QB/T 1697-2006 纸浆泵

本标准规定了纸浆的分类、要求、试验方法、检验规则和标志、包装、贮存、运输。 本标准适用于输送温度0～100℃浆料介质的纸浆泵（以下简称“浆泵”）。

Pulp pumps

QB/T 1700-2006 高压均质泵

本标准规定了高压均质泵的分类、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于食品液料、制药、日化、化工液料（如油脂、橡胶）等均质或高压喷雾用的高压均质泵（以下简称“均质泵”）。

High-pressure homogeneous pumps

QB/T 1699-2006 球形转子泵

本标准规定了球形转子泵的分类、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于输送易燃、易爆、高温、大黏度介质的球形转子泵（以下简称“球形泵”）。

Global rotor pumps

QB/T 1698-2006 纸浆泵 试验方法

本标准规定了纸浆泵的试验方法。 本标准包括了两种测量精度等级：1级适用较高精度的试验；2级适用于较低精度的试验。两种测量精度等级包括了不同的容差系数值、允许波动值和测量误差分析。 本标准适用于各类纸浆泵。

Pulp pumps.Test means

NF Q40-002-14:2006 机械安全.设计和制造纸张制造机器和装订机器的安全要求.第14部分:卷筒纸纵切机

Safety of machines - Safety requirements for the design and construction of paper making and finishing machines - Part 14 : reel splitter.

NF Q40-002-5:2006 机械安全.造纸机和整饰机械设计和制造的安全要求.第5部分:整平机

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 5 : sheeters.

NF Q40-002-13:2006 机械安全.造纸机和整饰机械设计和制造的安全要求.第13部分:货物和装置除线用机器

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 13 : machines for de-wiring bales and units.

NF Q40-002-4:2006 机械安全.造纸机和整饰机械设计和制造的安全要求.第4部分:纸浆机及其设备

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 4 : pulpers and their loading facilities.

NF Q40-002-6:2006 机械安全.造纸机和整饰机械设计和制造的安全要求.第6部分:砑光机

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines -Part 6 : calender.

NF Q40-002-2:2006 机械安全.造纸机和整饰机械设计和制造的安全要求.第2部分:非正常运转的机械

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 2 : barking drums.

DIN EN 1034-13:2006 机械安全.纸制造和整饰机械的设计和结构的安全要求.第13部分:货物和装置除线用机器.德文版本EN 1034-13-2005

This European Standard applies to machines for de-wiring bales and units and shall be used together with EN 1034-1:2000. It deals with all significant hazards, hazardous situations and hazard events relevant to machines for de-wiring bales and units, when used as intended and under conditions reasonably foreseeable by the manufacturer as incorrect application (see clause 4). This European Standard is not applicable to hand-held devices. This European Standard is not applicable to machines for de~wiring bales and units which are manufactured before the date of publication of this document by CEN.

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 13: Machines for de-wiring bales and units; German version EN 1034-13:2005

DIN EN 1034-2:2006 机械安全.纸张制造和整饰机械设计和建造的安全要求.第2部分:鼓式剥皮机.德文版本 EN 1034-2-2005

This European Standard applies to barking drums consisting of drum, drive, power transmission elements, supporting wheels and control intended for use in barking plants for paper making and shall be used in connection with EN 1034-1:2000. It deals with all significant hazards, hazardous situations and hazardous events relevant to barking drums when they are used as intended and under conditions which are reasonably foreseeable by the manufacturer. This standard is not applicable to the saws and conveyers for wood and bark used in barking plants.

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 2: Barking drums; German version EN 1034-2:2005

DIN EN 1034-6:2006 机械安全.纸张制造和整饰机械设计和建造的安全要求.第6部分:砑光机.德文版本 EN 1034-6-2005

This European Standard applies to calenders intended for use in paper making and finishing and shall be used together with EN 1034-1:2000. It deals with all significant hazards listed in clause 4. Related safety requirements and/or measures are described in clause 5. It does not cover hazards connected with lifting operations required for changing rolls, inserting reels into the unwinding unit, removal of reels from the winding unit and heating systems for heating calender rolls.. This European Standard is not applicable to calenders that have been manufactured before the date of publication of this standard.

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 6: Calender; German version EN 1034-6:2005

DIN EN 1034-5:2006 机械安全.纸张制造和整饰机械设计和建造的安全要求.第5部分:制纸张的机器.德文版本 EN 1034-5-2005

This European Standard applies to sheeters including unwinders, equipment for sheet piling, drive and control for use in paper converting and shall be used in connection with EN 1034-1:2000. This European Standard is not applicable to equipment for paper dust and waste edge cutting extraction. It deals with all significant hazards, hazardous situations and hazardous events relevant to sheeters when they are used as intended and under conditions which are reasonably foreseeable by the manufacturer.#,,#

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 5: Sheeters; German version EN 1034-5:2005

BS EN 1034-6:2005+A1:2009 机械安全性.造纸和整饰机械的设计和结构用安全性要求.砑光机

This European Standard applies to calenders intended for use in paper making and finishing and shall be used together with !EN 1034-1:2000+A1:2010". It deals with all significant hazards listed in clause 4. Related safety requirements and/or measures are described in clause 5. It does not cover hazards connected with lifting operations required for changing rolls, inserting reels into the unwinding unit, removal of reels from the winding unit and heating systems for heating calender rolls.. This European Standard is not applicable to calenders that have been manufactured before the date of publication of this standard.

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Calender

DIN EN 1034-14:2006 机械安全.纸张制造和整饰机械设计和建造的安全要求.第14部分:卷纸切纸机.德文版本 EN 1034-14-2005

This European Standard applies to machines for reel splitter in addition with EN 1034-1:2000.

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 14: Reel splitter; German version EN 1034-14:2005

DIN EN 1034-4:2006 机械安全.纸张制造和整饰机械设计和建造的安全要求.第4部分:碎浆机和装载工具.德文版本 EN 1034-4-2005

This European Standard applies to pulpers and their loading facilities intended for use in paper making and shall be used together with EN 1034-1:2000. It deals with all significant hazards, hazardous situations and hazard events relevant to pulpers and their loading facilities, when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). This European Standard is not applicable to pulpers and their loading facilities that have been manufactured before the date of publication of this standard.

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 4: Pulpers and their loading facilities; German version EN 1034-4:2005

BS EN 1034-2:2005+A1:2009 机械安全性.造纸机和修整机的设计和建造的安全性要求.鼓式剥皮机

This European Standard applies to barking drums consisting of drum, drive, power transmission elements, supporting wheels and control systems intended for use in debarking plants for paper making and shall be used together with !EN 1034-1:2000+A1:2010". It deals with all significant hazards, hazardous situations and hazard events relevant to barking drums, when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). This standard does not apply to sawing equipment or log and bark conveying systems used in debarking plants. This European Standard is not applicable to barking drums that have been manufactured before the date of publication of this European Standard by CEN.

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Barking drums