85.100 造纸工业设备 标准查询与下载
共找到 236 条与 造纸工业设备 相关的标准，共 16 页
本标准规定了D型水力碎浆机(以下简称D型碎浆机)的产品分类、要求、试验方法、检验规则、标志、包装、运输、贮存。 本标准适用于制浆造纸行业在浆板、损纸及废纸处理流程中进行碎解的ZDSD25-37型碎浆机。
Type D hydrapulper
- ICS
- 85.100
- CCS
- Y91
- 发布
- 2003-12-11
- 实施
- 2004-05-01
本标准规定了造纸用多层成形网(二层以上，含二层)的产品型号与分类、技术要求、试验方法、 检验规则和标志、包装、运输、贮存。 本标准适用于造纸用多层成形网。
Multi-layer forming fabric for paper-making
- ICS
- 85.100
- CCS
- Y91
- 发布
- 2003-12-11
- 实施
- 2004-05-01
5.1 This specification contains requirements based on state-of-art science and technology as applicable to various considerations that have been identified as important to ensure reasonable safety and efficacy as it relates to the biocompatibility and the mechanical integrity of the device components in soft tissue expander devices. 5.1.1 This specification is not intended to limit the science and technology that may be considered and applied to ensure performance characteristics of subject device in intended applications. When new information becomes available or changes in state-of-art science and technology occur and relevance to subject devices has been established by valid science, it is intended that this specification will be revised in accordance with ASTM guidelines. 1.1 This specification covers the requirements for single use saline inflatable, smooth and textured tissue expansion devices to be used intraoperatively or implanted for typically less than 6 months and then removed. 1.2 Limitations: 1.2.1 This specification applies only to soft-tissue expander devices fabricated with elastomer shells. It does not necessarily cover any custom fabricated soft tissue expander device manufactured to any other specification. 1.2.2 This specification applies, in part, to combination “expander/mammary” devices as classified in Section 4. 1.3 The values stated in SI units are to be regarded as standard, values in parentheses are for information only. 1.4 The following statement pertains only to the test methods and requirements portion, Section 9, of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Specification for Soft-Tissue Expander Devices
- ICS
- 85.100
- CCS
- 发布
- 2003
- 实施
1 This standard applies to paper making and paper finishing machines. It contains definitions and requirements which apply to all paper making and paper finishing machines listed in annex A and shall be used in connection with the specific part applicable for the respective machine listed in annex A. Specific parts can contain additional requirements or deviations from prEN 1034-1 in which case the specific stipulations take precedence over the specification made in prEN 1034-1. The standard deals with the hazards listed in 4. 2 This standard does not apply to machines used in paper converting. See EN 1010-1 to EN 1010-5. 3 This standard applies to machines produced after 17 September 1999.
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Common requirements
- ICS
- 85.100
- CCS
- Y91
- 发布
- 2000-07-15
- 实施
- 2000-07-15
This European Standard applies to winders and slitters and plying machines and should be used together with !EN 1034-1:2000+A1:2010". It deals with the significant hazards listed in clause 4. Respective safety requirements and/or measures are specified in clause 5. The specifications made in this standard take precedence over any deviating specification made in !EN 1034-1:2000+A1:2010". This standard does not apply to machines used in paper converting. See prEN 1010-1 to prEN 1010-5. This standard applies to machines produced after 17.11.1999.
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Winders and slitters, plying machines
- ICS
- 85.100
- CCS
- Y91
- 发布
- 2000-02-15
- 实施
- 2000-02-15
Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines. Winders and slitters, plying machines
- ICS
- 85.100
- CCS
- 发布
- 2000-02-15
- 实施
- 2000-02-15
Specifies the essential characteristics and the principles of calibration of compression testing machines used in testing of paper, board and corrugated fibreboard.
Paper, board and corrugated fibreboard - Description and calibration of compression-testing equipment
- ICS
- 85.100
- CCS
- Y30
- 发布
- 1996-09
- 实施
This Gulf standard specifies the internal diameters of cores of reels for paper recommended in the international commerce.
Internal diameters of cores of reels for paper .
- ICS
- 85.100
- CCS
- 发布
- 1994-11-16
- 实施
This Gulf standard contains definitions for the professions of personnel working at the fields of liquefied gas cylinder distribution and gas appliances installation and maintenance. It also includes the provisions to be met in the personnel performing inspections on these appliances, cylinders and fittings thereof as well as the training programmes for those personnel as to be technically qualified and efficient to properly perform their duties
PERSONNEL REQUIREMENTS FOR PROFESSIONS OF LIQUIFIED GAS DISTRIBUTION, GAS APPLIANCES INSTALLATION AND MAINTENANCE
- ICS
- 85.100
- CCS
- 发布
- 1994-11-16
- 实施
Machines for the pulp and paper industry. Safety requirements
- ICS
- 85.100
- CCS
- 发布
- 1982
- 实施
- 1982-07-01
Design and guarding of guillotines and trimmers for cutting paper and similar materials.
Specification for the safety of hand operated paper cutting machines
- ICS
- 85.100
- CCS
- Y91;J87
- 发布
- 1977-07-29
- 实施
- 1977-07-29
PAPER. INSIDE DIAMETERS OF MANDRELS FOR SPOOLS OF PAPER.
- ICS
- 85.100
- CCS
- Y91
- 发布
- 1966-03
- 实施
