87.080 墨水、油墨 标准查询与下载



共找到 420 条与 墨水、油墨 相关的标准,共 28

本标准规定了凹版塑料薄膜复合油墨的要求、试验方法、检验规则及标志、包装、运输、贮存。本标准适用于在凹版轮转印刷机上使用的承印物为经处理的聚乙烯、双向拉伸聚丙烯等塑料薄膜里面印刷的凹版塑料薄膜复合油墨。

Gravure lamination ink for plastic film

ICS
87.080
CCS
A17
发布
2012-12-28
实施
2013-06-01

本标准规定了凹版塑料薄膜表印油墨的要求、试验方法、检验规则和标志、包装、运输、贮存。本标准适用于凹版轮转印刷机上使用的凹版塑料薄膜表印油墨。

Gravure surface ink for plastic film

ICS
87.080
CCS
A17
发布
2012-12-28
实施
2013-06-01

本标准规定了圆珠笔用碳化钨球珠的分类、要求、试验方法、检验规则及标志、包装、运输、贮存。本标准适用于公称直径为0.25 mm~1.60 mm的圆珠笔用碳化钨球珠(以下称为“球珠”)。

Tungsten carbide balls for ball pen

ICS
87.080
CCS
Y50
发布
2012-12-28
实施
2013-06-01

本标准规定了圆珠笔笔头的分类、要求、试验方法、检验规则及标志、包装、运输、贮存。本标准适用于油墨圆珠笔笔头、中性圆珠笔笔头和水性圆珠笔笔头(以下称为“笔头”)。

Tips for ball pen

ICS
87.080
CCS
Y50
发布
2012-12-28
实施
2013-06-01

本标准规定了油漆笔用墨水的要求、试验方法、检验规则及标志、包装、运输、贮存。本标准适用于以乙醇为主要溶剂的油漆笔用墨水(以下称为“墨水”)。

Inks for paint marker

ICS
87.080
CCS
Y50
发布
2012-12-28
实施
2013-06-01

本标准规定了水性圆珠笔用墨水的分类、要求、试验方法、检验规则及标志、包装、运输、贮存。本标准适用于一般书写和文件书写用水性圆珠笔用墨水(以下称为“墨水”)。

Inks for roller ball pen

ICS
87.080
CCS
Y50
发布
2012-12-28
实施
2013-06-01

本标准规定了软笔用墨水的分类、要求、试验方法、检验规则及标志、包装、运输、贮存。本标准适用于颜料型和染料型软笔用水性墨水(以下称为“墨水”)。

Inks for soft nib pen

ICS
87.080
CCS
Y50
发布
2012-12-28
实施
2013-06-01

本标准规定了中性墨水的分类、要求、试验方法、检验规则及标志、包装、运输、贮存。本标准适用于一般书写和文件书写用中性墨水(以下称为“墨水”),不适用于具有可擦、变色、粉彩、金属色等功能的特种中性墨水。

Gel inks

ICS
87.080
CCS
Y50
发布
2012-12-28
实施
2013-06-01

Printing inks for graphic technology - Labelling of properties of sheetfed offset inks

ICS
87.080
CCS
A17
发布
2012-12
实施

1.1 This practice covers the procedure for preparing laboratory prints of paste inks using a printing gage in conjunction with a flat-bed proof press. 1.2 This practice is applicable to the preparation of solidarea prints by direct letterpress or by dry offset on a flat substrate such as paper, paperboard, or metal. 1.3 This practice is applicable primarily to lithographic and letterpress inks that dry by oxidation or penetration. With the addition of appropriate drying or curing equipment, it is also applicable to other paste ink systems such as heat-set or energy-curable. 1.4 The instructions in this practice are intended to minimize the within-print and among-operator variability inherent in hand operations. 1.5 This practice features built-in ink film thickness control. It does not measure the film thickness transferred to the print; however, film thickness equivalence may be evaluated by visual or instrumental comparisons of optical density. 1.6 Values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific precautions are given in Section 7.

Standard Practice for Preparing Prints of Paste Printing Inks with a Printing Gage

ICS
87.080
CCS
发布
2012-06-01
实施

Testing of prints and printing inks in graphic technology - Resistance to various physical and chemical influences - Part 5: Resistance to sterilization with autoclave

ICS
87.080
CCS
A17
发布
2012-06-01
实施

本标准规定了丙烯画颜料的分类、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于绘制在画布、纸布、木质、墙面等载体上的普通用丙烯画颜料。

Acrylic colour

ICS
87.080
CCS
Y50
发布
2012-05-24
实施
2012-11-01

本标准规定了油画颜料的分类、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于绘制油画的颜料。

Oil colour

ICS
87.080
CCS
Y50
发布
2012-05-24
实施
2012-11-01

本标准规定了光学变色油墨的术语和定义、产品分类、技术要求、试验方法、检验规则及包装、标志、运输及贮存。 本标准适用于各种承印物印刷用的光学变色油墨。

Optical color changing ink

ICS
87.080
CCS
A17
发布
2011-12-30
实施
2012-04-01

Calking compound, synthetic rubber base, wooden deck seam application

ICS
87.080
CCS
发布
20110715
实施
20110715

本标准规定了自来水笔和蘸水钢笔用非颜料型墨水的分类、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于自来水笔和蘸水钢笔用鞣酸铁型和染料型墨水。

Fountain pen inks.Part 1:Non-pigment inks

ICS
87.080
CCS
Y50
发布
2011-05-18
实施
2011-08-01

本标准规定了中性墨水圆珠笔和笔芯的术语和定义、分类、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于一般书写和文件书写用中性墨水圆珠笔(换芯式和不可换芯式)和笔芯。

Gel ink ball pens and refills

ICS
87.080
CCS
Y50
发布
2011-05-18
实施
2011-08-01

本标准规定了微孔笔头的分类、要求、试验方法、检验规则及标志、包装、运输、贮存。 本标准适用于采用聚甲醛等材料经挤出成型的笔头,本标准不适用于包塑型笔头。

Microporous nibs

ICS
87.080
CCS
Y50
发布
2011-05-18
实施
2011-08-01

本标准规定了纤维笔头的分类、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于采用合成纤维材料经粘结成型的笔头,引水芯也可参照使用。

Fiber nibs

ICS
87.080
CCS
Y50
发布
2011-05-18
实施
2011-08-01

本标准规定了荧光记号笔用墨水的分类、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于染料型和颜料型荧光记号笔用水性墨水。

Inks for fluorescent pen

ICS
87.080
CCS
Y50
发布
2011-05-18
实施
2011-08-01



Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号