87.080 墨水、油墨 标准查询与下载

T/CI 238-2023 水性凹印光油

本文件规定了水性凹印光油的术语和定义、技术要求、试验方法、检验规则、标志、包装、运输及贮存。 本文件适用于轮转、单张凹版印刷的水性凹印光油。

Water-based gravure varnish

T/CI 239-2023 紫外光（UV）固化丝印裂变油墨

本文件规定了紫外光（UV）固化丝印裂变油墨的术语和定义、技术要求、试验方法、检验规则、标志、包装、运输及贮存。 本文件适用于纸张及复合材料上使用的紫外光（UV）固化丝印裂变油墨。

Ultraviolet light（UV）curable screen printing fission ink

T/CPF 0067-2023 质量分级及“领跑者”评价要求 塑料薄膜用水性凹印油墨

本文件规定了塑料薄膜用水性凹印油墨产品质量及企业标准水平的基本要求、评价指标及要求、评价方法及等级划分和产品质量分级。

Assessment requirements for quality grading and forerunner— Water-based gravure printing ink for plastic film

T/QGCML 1206-2023 装饰纸水性印刷油墨

本文件规定了装饰纸水性印刷油墨的术语和定义、要求、试验方法、检验规则、标志、包装、运输和贮存。 本文件适用于装饰纸水性印刷油墨的生产和检验。

Decorative paper water-based printing ink

T/ZZB 3127-2023 水性薄膜凹印复合油墨

本文件规定了水性薄膜凹印复合油墨的术语和定义、基本要求、技术要求、试验方法、检验规则、标志、标签、包装、运输、贮存及质量承诺。 本文件适用于在凹版轮转印刷机上使用的非吸收性承印物（包括经处理的聚丙烯、聚酯等印刷用塑料薄膜）的水性薄膜凹印复合油墨。

Water based gravure lamination ink for film

IEC 62899-202:2023 RLV 印刷电子产品.第202部分:材料.导电油墨

Printed electronics - Part 202: Materials - Conductive ink

IEC 62899-202:2023 印刷电子产品.第202部分:材料.导电油墨

Printed electronics - Part 202: Materials - Conductive ink

23/30473244 DC BS EN IEC 62899-302-4 印刷电子产品 第 302-4 部分 用于印刷电子产品喷墨印刷点布局评估的介质

BS EN IEC 62899-302-4. Printed Electronics - Part 302-4. Medium for Inkjet printing dot placement evaluation for printed electronics

BS ISO 23498:2022 图形技术 印刷白色油墨的视觉不透明度

1   Scope This document specifies a method of measuring the visual opacity of printed specimens of white ink. It is applicable to printing opaque white ink on transparent and white or coloured opaque substrates.

Graphic technology. Visual opacity of printed white ink

T/AQSPMK 0010-2023 绿色设计产品评价技术规范 纤维和塑料用母粒

       本文件规定了纤维和塑料用母粒（以下简称“纤塑母粒”）绿色设计产品的评价要求，描述了产品生命周期评价方法及评价报告编制方法和评价方法。        本文件适用于纤塑母粒的绿色设计产品评价。

Technical specification for green-design product assessment — Masterbatch for fiber and plastic

T/AQSPMK 0009-2023 塑料制品着色剂制造业 绿色工厂评价要求

       本文件确立了塑料制品着色剂制造业绿色工厂的评价总则和评价程序，规定了评价要求和评价报告的内容。        本文件适用于具有实际生产过程的塑料制品着色剂制造业绿色工厂的评价，并作为工业行业制定绿色工厂评价标准或具体要求的总体要求。

Colorants for plastic products manufacturing industry — Evaluation requirements for green factories

T/WFSB 10-2023 文房四宝 专业级墨

术语和定义、分类、规格及偏差、外观、产品基本性能要求、安全环保要求

Four treasures of the study professional grade ink

T/AQSPMK 005-2023 聚氯乙烯人造革用色浆

       本文件描述了聚氯乙烯人造革用色浆的术语和定义、要求、试验方法、检验规则、标志、包装、运输和贮存。        本文件适用于以增塑剂为载体，由各种有机、无机颜料及添加剂制备而成的聚氯乙烯人造革用色浆的生产、检测和销售。

Colorants for polyvinyl chloride artificial leather

T/AQSPMK 0005-2023 聚氯乙烯人造革用色浆

       本文件描述了聚氯乙烯人造革用色浆的外观和理化指标、有害物质限量要求，描述了相应的试验方法，规定了检验规则、标志、包装、运输和贮存的内容。        本文件适用于以增塑剂为载体，由各种有机、无机颜料及添加剂制备而成的聚氯乙烯人造革用色浆的生产、检验和销售。

Colorants for polyvinyl chloride artificial leather

BS ISO 2834-2:2022 图形技术 测试印刷品的实验室准备 液体印刷油墨

1   Scope This document specifies a test method for preparation of test prints produced with liquid printing inks , either water-based, solvent-based or radiation cured printing inks as used in flexography and gravure printing. Such test prints are intended to be used for reflection-based measurements, such as colorimetry and optical density as well as for testing light fastness, and the resistance of printing inks to mechanical and chemical attack regarding either printing ink and/or substrate. This document is not applicable to inks for ink jet printing.

Graphic technology. Laboratory preparation of test prints - Liquid printing inks

ISO 23498:2022 印刷技术.印刷白色油墨的视觉不透明度

This document specifies a method of measuring the visual opacity of printed specimens of white ink. It is applicable to printing opaque white ink on transparent and white or coloured opaque substrates.

Graphic technology — Visual opacity of printed white ink

ASTM D7514-14(2022) 用目视评定法评定建筑涂料系统的油墨沾污性的标准试验方法

1.1 This standard provides a method for evaluating the ability of an architectural paint system to block ink stains from markers and writing instruments from bleeding through a primer into a topcoat. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Evaluating Ink Stainblocking of Architectural Paint Systems by Visual Assessment

ISO 2834-2:2022 印刷技术.试验印刷品的实验室制备.第2部分:液体印刷油墨

This document specifies a test method for preparation of test prints produced with liquid printing inks, either water-based, solvent-based or radiation cured printing inks as used in flexography and gravure printing. Such test prints are intended to be used for reflection-based measurements, such as colorimetry and optical density as well as for testing light fastness, and the resistance of printing inks to mechanical and chemical attack regarding either printing ink and/or substrate. This document is not applicable to inks for ink jet printing.

Graphic technology — Laboratory preparation of test prints — Part 2: Liquid printing inks

T/SHBX 010-2022 《塑料复合凹印用水性墨 》

本标准规定了塑料复合凹印用水性墨的产品要求、测试方法、检验规则、标志、包装、贮存和运输。

Water-based?gravure?plastic?composite?ink

T/CAGDE 217-2022 水性柔版油墨

本文件规定了水性柔版油墨的术语和定义、产品分类及特点、技术参数、检测方法、检验规则、标 志、包装、运输与贮存和使用中的个人防护等。 本文件适用于以水性丙烯酸树脂、水性丙烯酸乳液、颜料及水性助剂为主要成分的水性柔版油墨。

Water-based flexographic ink